Volume: 6 Issue: 1, 7/31/23

Year: 2023

European Journal of Engineering and Applied Sciences (EJEAS) is an open-access international scholarly refereed research journal which aims to publish original research articles, case studies and technical reports, reviews and analysis papers in interdisciplinary areas with an emphasis on the practice and status of research in sustainable and innovative engineering and technology. The journal is published online biannually. There are no publication fees.  Experimental, theoretical or computational studies are all welcome. The journal's international network of editorial board members may represent various disciplines and related groups such as university, industry, government, consulting firms and public interest groups.

The journal covers the following disciplines but not limited to:

  • Automation and Mechatronics Engineering
  • Biomedical Engineering
  • Computer Science and Software Engineering
  • Civil Engineering​ and Architecture
  • Electrical, Electronics and Telecommunication Engineering
  • Environmental Engineering
  • Industrial and Manufacturing Engineering
  • Mechanical Engineering
  • Material Science​ and Engineering
  • Textile Engineering

All manuscripts must be submitted electronically via,

https://dergipark.org.tr/ejeas

You will be guided throughout the submission process. There are no page charges.

Papers are accepted for publication on the understanding that they have not been published and are not going to be considered for publication elsewhere. Authors should certify that neither the manuscript nor its main contents have already been published or submitted for publication in another journal.

Manuscripts may be rejected without peer review by the editors if they do not comply with the instructions to authors or if they are beyond the scope of the journal.

Only one article can be published by a leading author in the same issue.

Preparation of Manuscript

Style and Format:

Manuscripts can be written both in English and Turkish. Manuscripts should be double column, single space with 2cm margins on all sides of the page, in Times New Roman font with size 9. Manuscripts should be submitted by the corresponding author of the manuscript after registration to EJEAS. Please use the Office Word Template when preparing your manuscript. The page limit is 12 pages for research articles. There is no predefined limit for review articles. The submitting author takes responsibility for the paper during submission and peer review.

Symbols, Units, and Abbreviations:

In general, the journal follows the conventions of Scientific Style and Format, The CSE Manual for Authors, Editors, and Publishers, Council of Science Editors, Reston, VA, USA (8th ed.).

Manuscript Content:

Research articles should be divided into sections as appropriate and principal sections should be numbered consecutively (1. Introduction, 2. Materials and Methods, 3. Results, etc.), and subsections should be numbered 1.1., 1.2., etc.

Title and Contact Information:

Paper titles should be written in uppercase and lowercase letters, not all uppercase. Full names of authors are preferred in the author field but are not required. Affiliations of all authors should be given below the name field and contact information (e-mail) of the corresponding author should be included as a footnote.

Abstract:

The abstract must be a concise description of the main content of your article. The abstract must be between 150–250 words. It should be written as one paragraph, and should not contain displayed mathematical equations, tabular material, abbreviations, footnotes, or references.

Keywords:

Please provide 4-6 keywords or phrases to enable retrieval and indexing.

Tables and Figures:

Tables should be cited consecutively in the text. Every table must have a descriptive title and if numerical measurements are given, the units should be included in the column heading. Tables should be simple with simple borders and text should be written from the left side.

Each figure should be integrated in the paper body.  Figure widths can be 4-6 inch as 300 dpi.

The labels of the tables and the figures should be clear and informative. They should be below the figures and above the tables.

Author Contribution:

Data curation - Author Name Surname(NS); Formal analysis - NS; investigation - NS; Experimental Performance - NS; Data Collection - NS;, Processing - NS; Literature review - NS; Writing - NS; review and editing - NS...

Declaration of Competing Interest:

The authors declared no conflicts of interest with respect to the research, authorship, and/or publication of this article.

Acknowledgments:

Names of funding organizations (if any) should be written.


References

References must be listed in numerical order at the end of the article and numbered in square brackets. Do not use individual sets of brackets for citation numbers that appear together, e.g., [1,5], not [1], [5]. Do not write unused references and please avoid unnecessary references. References should be formatted as follows:

Articles:

[1] Li, C., Sun, T., Kelly, K. F., & Zhang, Y. (2012). A compressive sensing and unmixing scheme for hyperspectral data processing. IEEE Transactions on Image Processing,21(3), 1200-1210.

[2] Singh, B. N., & Tiwari, A. K. (2006). Optimal selection of wavelet basis function applied to ECG signal denoising. Digital signal processing16(3), 275-287.

Books:

[3] Mallat, S. (1999). A wavelet tour of signal processing. Academic Press.

Theses:

[4] Karataş, A., Molecular biology and genetics of dipeptide biosynthesis: the system is an essential component of quorum sensing global regulation, (2000), PhD, Middle East Technical University, Ankara.

Conference Proceedings:

[5] Mert, A., & Akan, A. (2014). EEG denoising based on empirical mode decomposition and mutual information. In XIII Mediterranean Conference on Medical and Biological Engineering and Computing 2013 (pp. 631-634). Springer, Cham.

Chapters in Books:

[6] Castillo, E., Marty, A., Condoret, J. S., Combes, D., Enzymatic catalysis in nonconventional media using high polar molecules as substrates, In: Annals of the New York Academy of Science, J. S. Dordick, A. J. Russell (eds), The New York Academy of Science, New York, pp. 206-211, 1996.

Privacy Statement

The names and email addresses entered in this journal site will be used exclusively for the stated purposes of this journal and will not be made available for any other purpose or to any other party.

In terms of publication ethics European Journal of Engineering and Applied Sciences (EJEAS) pursues the principles, standards and recommendations of the publication ethics determined by Committe on Publication Ethics - COPE (https://publicationethics.org/). Accordingly, all the articles that do not comply with the accepted standards of ethics are rejected. The rule also applies to those articles that contain discrepancies that are detected after the publication. In the context of publication ethics, all the shareholders are expected to bear the following ethical responsibilities in brief and all the ethical incidences are going to be evaluated in compliance with COPE rules.

Ethical Responsibilities of Authors
- Authors should send those articles which have not been published elsewhere or which have not been sent anywhere.
- Authors should give references to all the citations in their articles.
- Authors are accepted to declare that the article belongs to themselves, they do not plagiarise, all the responsibilities due to plagiarism belong to themselves and the journal does not have any responsibility in such cases.
- Authors should guarantee that they give any scientific contribution to the article and it should be accepted that all the authors of the article have equal responsibility.
- The corresponding author should guarantee that all the co-authors mentioned in the article have an agreement on the publication of the article and on being named as co-authors. All the writers who give crucial contributions to the article should be named as co-authors.
- Others should be given a place in the acknowledgment.
- Authors are responsible for declaring the supporting institutions, financial sources, or conflicts of interest.
- In case of necessity, authors should give access to the data sets utilized in the articles.
- The authors should prepare the articles to be published in the Journal in accordance with research and publication ethics. For the research made in the article and for clinical and experimental studies on human and animal that necessitate ethics committee approval separate ethics committee approvals should be taken and these approvals should be mentioned in the article and should be documented.

Ethical Responsibilities of Reviewers
- Any reviewer who is selected for reviewing the article but whose qualifications do not match with the subject of the article and/or to whom the time limitation of the review process is not appropriate should inform the editor and ask for her/his removal from the review process.
- Reviewers are responsible for the concealment of the articles they received and for not using the information attained from the reviewing process for personal interests.
- Reviewers should not share their evaluations reports or information about the article with others and should not directly communicate with the authors without the permission of the editor.
- Reviewers should be intentive about potential ethical incidences in the article and should present them to the editor. This includes similarities and overlappings with the studies of the reviewer published elsewhere.
- Reviewing should be done objectively. Personal criticisms should be avoided and the evaluations should be constructive, honest and polite.
- Reviewers who may have any potential conflicts of interest with (at least) one of the authors due to a competitive, collaborative of other types of relationships or connections should inform the editor before accepting the reviewing process.

Ethical Responsibilities of Editorial Board
- The decision of the selection of articles to be published in the Journal is under the responsibility of the editorial board. The editorial board should carry out the evaluation independent of race, gender, sexual orientation, religious belief, ethnic origin, citizenship or political philosophy. The decision to be made should be based on the accuracy, validity and importance of the article, and its relevance with the scope of the Journal. Legal necessities should also be consulted in cases of slander, copyright infringement and plagiarism.
- The editor or any member of the editorial board should not reveal any information about the article except for the related authors, reviewers, potential reviewers, other editorial consultants and publishers.
- The information in any article presented but not published should not be used in any research of the editor or of the member of the editorial board without the express written permission of the authors.

For all articles accepted and published as a result of the peer reviews, no fee is charged for authors or readers.