Statistical analysis of the effect of melt flow index and weight changes on strength properties of polypropylene spunbond fabrics

Year 2020, Volume: 4 Issue: 1, 97 - 102, 30.06.2020

İsmail Tiyek Emrah Kaçmaz Mustafa Yazıcı Mahmut Kılınçkıran

https://doi.org/10.32571/ijct.735747

Abstract

Spunbond method is widely used in the production of nonwoven fabrics. Melt flow index (MFI) is one of the most important polymer processing parameters. In this paper, tensile strength and elongation values of spunbond fabrics with four different weights produced from polypropylene polymers with two different MFI values were measured. Tensile strength tests were analyzed by two-way multiple variance analysis (Two-Way Manova) in the SPSS statistical package program, and the effects of MFI and weight values on the strength properties of spunbond textile surfaces were examined. As a result of the statistical analysis, it was observed that statistically significant differences (p < 0.05) occurred in both tensile strength and elongation values with the change of weight value. In addition, significant differences (p < 0.05) occurred in tensile strengths with the change of MFI value, but the differences in elongation values were not statistically significant (p > 0.05).

Keywords

Spunbond, Melt flow index (MFI), Weight, Tensile strength, Elongation

Thanks

The authors are grateful to the Teknomelt Teknik Mensucat San. ve Tic. A.Ş. for their supports in the experimental studies.

References

• 1. Kalebek, N. A.; Babaarslan, O. Tekstil ve Konfeksiyon 2009, 19 (2), 145-150 (In Turkish).
• 2. Wang, X. Y.; Gong, R. H.; Dong, Z.; Porat, I. Polym. Eng. Sci. 2006, 46 (7), 853-863.
• 3. Limem, S.; Warner, S. B. Text. Res. J. 2005, 75 (1), 63-72.
• 4. Lim, H. JTATM. 2010, 6 (3), 1-13.
• 5. Bledzki, A. K.; Faruk, O. J. Appl. Polym. Sci. 2005, 97 (3), 1090-1096.
• 6. Karger-Kocsis, J.; Mouzakis, D. E.; Ehrenstein, G. W.; Varga, J. J. Appl. Polym. Sci. 1999, 73 (7), 1205-1214.
• 7. Nanjundappa, R.; Bhat, G.S. J. Appl. Polym. Sci. 2005, 98 (6), 2355-2364.
• 8. Durmuş, A. Investigation of Processed Poliolefins by DSC. Master Thesis, University of İstanbul, İstanbul, 2001.
• 9. Necipoğlu, A. Synthesis of Polypropylene-Clay Nanocomposites and Investigation of the Gas Permeability. Master Thesis, Yıldız Technical University, Istanbul, 2011.
• 10. Ferg, E. E.; Bolo, L. L. Polym. Test. 2013, 32 (8), 1452-1459.
• 11. Ersu, D. Preparation and Characterization of Nanocomposites with a Thermoplastic Matrix and Spherical Reinforcement. Master Thesis, Middle East Technical University, Ankara, 2006.
• 12. Chui, Q. S. H.; Franciscone, C.; Baptista, J. A. F.; Rosa, D. S. Polym. Test. 2007, 26 (5), 576-586.
• 13. Savaşçı, Ö. T.; Uyanık, N.; Akovalı, G. Ana Hatları İle Plastikler ve Plastik Teknolojisi, 3rd ed.; PAGEV Yayınları, İstanbul, 2008 (In Turkish).
• 14. Güldaş, A.; Çankaya, A.; Güllü, A.; Gürü, M. Gazi Üniv. Müh. Mim. Fak. Der. 2014, 29 (2), 227-234 (In Turkish).
• 15. Yang, J.; Liang, J. Z.; Tang, C. Y. Polym. Test. 2009, 28 (8), 907-911.
• 16. Das, A.; Kothari, V. K.; Vandana, N. AUTEX Res. J. 2005, 5 (3), 133-140.
• 17. ASTM D 1238. Standart Test Method For Melt Flow Rates of Thermoplastics by Extrusion Plastomer, Annual Book of ASTM Standard, sayı 08.01, S 265-276, 2001.
• 18. TS EN ISO 1133. Plastics-Determination of The Melt Mass - Flow Rate (MFR) and The Melt Volume-Flow Rate (MVR) of Thermoplastics, TSE, Ankara, 2011.
• 19. Çinçik, E. Experimental and Statistical Analysis of The Propertıes of Polyester/Viscose Blended Nonwovens Produced by Needle Punching Method. PhD Thesis, Çukurova University, Adana, 2010.
• 20. Jeon, B. S. Text. Res. J. 2001, 71 (6), 509-513.
• 21. Onan, M. Disposable Hydrophilic Antimicrobial Nonwoven Bed Sheet. Master Thesis, Istanbul Technical University, Istanbul, 2010.
• 22. EDANA WSP 110.4 (05). Breaking Force and Elongation of Nonwoven Materials (Strip Method). Nonwovens Standard Procedures, 2012.