Fused deposition modeling (FDM) is a rapidly growing rapid prototyping technology due to its ability to create functional parts with complex shapes in a reasonable time. Determining and improving the mechanical properties of the products produced by 3D printers using the FDM method is of great importance for the widespread use of this manufacturing method. In this study; tensile test specimens have been produced in different colors and different infill patterns using ABS and PLA materials with the Ultimaker 2 Extended 3D printer. The effects of filament color and infill pattern on mechanical properties have been investigated experimentally. As a result, it has been determined that the filament color used has no significant effect on the mechanical properties of the tensile samples produced by 3D printer. Among the infill patterns used, it has been determined that the highest tensile strength values are in the samples produced with the "Concentric" infill pattern.
Additive Manufacturing Fused Deposition Modeling 3D Printer Tensile Test Hardness Infill Pattern
Erimiş yığma modellemesi (FDM), makul bir süre içinde karmaşık şekillere sahip işlevsel parçalar oluşturma yeteneği nedeniyle hızla büyüyen bir hızlı prototipleme teknolojisidir. FDM yöntemiyle üretim yapan 3 boyutlu yazıcılarla üretilen ürünlerin mekanik özelliklerinin belirlenmesi ve geliştirilmesi, bu imalat yönteminin kullanımının yaygınlaşması açısından büyük öneme sahiptir. Bu çalışmada; Ultimaker 2 Extended 3B yazıcı ile ABS ve PLA malzeme kullanılarak farklı renklerde ve farklı dolgu desenlerinde çekme test numuneleri üretilmiştir. Filament renginin ve dolgu deseninin mekanik özellikler üzerindeki etkileri deneysel olarak araştırılmıştır. Sonuç olarak, kullanılan filament renginin, 3 boyutlu yazıcı ile üretilen çekme numunelerinin mekanik özellikleri üzerinde kayda değer bir etkisinin olmadığı tespit edilmiştir. Kullanılan dolgu desenleri arasından en yüksek çekme mukavemeti değerlerinin “Concentric” dolgu deseniyle üretilen numunelerde olduğu belirlenmiştir.
Primary Language | Turkish |
---|---|
Subjects | Mechanical Engineering |
Journal Section | Research Articles |
Authors | |
Publication Date | December 31, 2021 |
Submission Date | February 27, 2021 |
Acceptance Date | September 22, 2021 |
Published in Issue | Year 2021 Volume: 26 Issue: 3 |
Announcements:
30.03.2021-Beginning with our April 2021 (26/1) issue, in accordance with the new criteria of TR-Dizin, the Declaration of Conflict of Interest and the Declaration of Author Contribution forms fulfilled and signed by all authors are required as well as the Copyright form during the initial submission of the manuscript. Furthermore two new sections, i.e. ‘Conflict of Interest’ and ‘Author Contribution’, should be added to the manuscript. Links of those forms that should be submitted with the initial manuscript can be found in our 'Author Guidelines' and 'Submission Procedure' pages. The manuscript template is also updated. For articles reviewed and accepted for publication in our 2021 and ongoing issues and for articles currently under review process, those forms should also be fulfilled, signed and uploaded to the system by authors.