BibTex RIS Kaynak Göster

A New Method to Determine the Start and End of Combustion in an Internal Combustion Engine Using Entropy Changes

Yıl 2000, Cilt: 3 Sayı: 2, 49 - 55, 01.06.2000

Mohand Tazerout Olivier Le Corre A. Ramesh

Öz

Simulation studies indicated that the start and end of combustion in an internal combustion engine could be determined from the points of minimum and maximum entropy in the cycle. This method was further used to predict the beginning and end of the combustion process from experimentally obtained pressure crank angle data from a natural gas operated, single cylinder, spark ignition engine. The end of combustion always matched well with the point of maximum entropy. The start of combustion could be determined easily from the rate of change of entropy, which showed a sharp change at ignition. Results closely agreed with those obtained from a heat release analysis.

Anahtar Kelimeler

combustion analysis entropy spark ignition engine natural gas engine entropy variation

Yıl 2000, Cilt: 3 Sayı: 2, 49 - 55, 01.06.2000

Mohand Tazerout Olivier Le Corre A. Ramesh

Öz

Toplam 0 adet kaynakça vardır.

Ayrıntılar

Birincil Dil İngilizce
Bölüm Regular Original Research Article
Yazarlar

Mohand Tazerout Bu kişi benim

Olivier Le Corre Bu kişi benim

A. Ramesh Bu kişi benim

Yayımlanma Tarihi 1 Haziran 2000
Yayımlandığı Sayı Yıl 2000 Cilt: 3 Sayı: 2

Kaynak Göster

APA Tazerout, M., Le Corre, O., & Ramesh, A. (2000). A New Method to Determine the Start and End of Combustion in an Internal Combustion Engine Using Entropy Changes. International Journal of Thermodynamics, 3(2), 49-55.
AMA Tazerout M, Le Corre O, Ramesh A. A New Method to Determine the Start and End of Combustion in an Internal Combustion Engine Using Entropy Changes. International Journal of Thermodynamics. Haziran 2000;3(2):49-55.
Chicago Tazerout, Mohand, Olivier Le Corre, ve A. Ramesh. “A New Method to Determine the Start and End of Combustion in an Internal Combustion Engine Using Entropy Changes”. International Journal of Thermodynamics 3, sy. 2 (Haziran 2000): 49-55.
EndNote Tazerout M, Le Corre O, Ramesh A (01 Haziran 2000) A New Method to Determine the Start and End of Combustion in an Internal Combustion Engine Using Entropy Changes. International Journal of Thermodynamics 3 2 49–55.
IEEE M. Tazerout, O. Le Corre, ve A. Ramesh, “A New Method to Determine the Start and End of Combustion in an Internal Combustion Engine Using Entropy Changes”, International Journal of Thermodynamics, c. 3, sy. 2, ss. 49–55, 2000.
ISNAD Tazerout, Mohand vd. “A New Method to Determine the Start and End of Combustion in an Internal Combustion Engine Using Entropy Changes”. International Journal of Thermodynamics 3/2 (Haziran 2000), 49-55.
JAMA Tazerout M, Le Corre O, Ramesh A. A New Method to Determine the Start and End of Combustion in an Internal Combustion Engine Using Entropy Changes. International Journal of Thermodynamics. 2000;3:49–55.
MLA Tazerout, Mohand vd. “A New Method to Determine the Start and End of Combustion in an Internal Combustion Engine Using Entropy Changes”. International Journal of Thermodynamics, c. 3, sy. 2, 2000, ss. 49-55.
Vancouver Tazerout M, Le Corre O, Ramesh A. A New Method to Determine the Start and End of Combustion in an Internal Combustion Engine Using Entropy Changes. International Journal of Thermodynamics. 2000;3(2):49-55.