Araştırma Makalesi
BibTex RIS Kaynak Göster

Effect of Different Metal Oxides On Vickers Hardness of the Frit Based Crystalline Glazes

Yıl 2018, Cilt: 7 Sayı: 1, 32 - 40, 30.06.2018
https://doi.org/10.17100/nevbiltek.368987

Öz

Frit based
glaze is a thin glassy surface coating which gives technical and aesthetic
value to the ceramic product after firing.
Crystalline
glazes are one of the most important type of artistic glazes formed through a
controlled crystallization of glass during a special heat treatment. Crystals
are visible to the naked eye and the product can have only a few single
crystals on the surface or the entire surface can be coated with crystals. The
preferred clay substrate for crystalline glazes is porcelain and in some cases
may be used for the macrocrystallines. Usage of these types of glazes as
porcelain tile coatings is an alternative choice for relevant ceramic industry
and these glazes strongly enhance the visual quality of the final products.
When designing crystalline glazes for porcelain tiles;
besides the chemical composition, mechanical properties such as hardness is
also an important factor.
Within
the scope of experimental studies, frit based crystalline glazes which consist
of different nucleating agents such as MnO, Fe2O3, NiO,
CoO, CuO and Cr2O3 were applied on the raw porcelain
bodies and then subjected to a special heat treatment cycle. The aim of this
study was to investigate the effect of different metal oxides on
crystallization capacity of newly developed fritted glaze compositions and
Vickers hardness of the final products. Micro hardness of the glazes was
measured with Vickers hardness test method. Characterization of crystalline
glazes was done by x-ray diffraction (XRD) technique.

Kaynakça

  • [1]Şölenay, E., “Seramik Sanat Eğitiminde Sırlama ve Pişirme Yöntemleri El Kitabı” Murat Kitapevi, Ankara, 2012.
  • [2]Arcasoy, A., “Ceramics Technology” Marmara Üniversitesi Güzel Sanatlar Fakültesi Seramik Ana Sanat Dalı Yayınları, İstanbul, 1983.
  • [3]Chavarrıa, J., “Ceramic Class: Glazing Techniques” Watson-Guptill Publishing, 1998.
  • [4]Quinn, G.D., “Hardness Testing of Ceramics” Advanced Materials & Processes, 1998.
  • [5]Parmelee, C. W., Harman, C. G., “Ceramic glazes” CBI Publishing, Boston, MA, 1973.
  • [6]ASTM, ASTM C., 1327-03, “Standard Test Method for Vickers Indentation Hardness of Advanced Ceramics” ASTM-International, Metals Park, OH, 2003.
  • [7] McColm, I.J., “Dictionary of Ceramic Science and Engineering” Plenum Press, New York, 1994.
  • [8]Karasu, B., Çakı, M., Turan, S., “The Development and Characterization of Zinc Crystal Glazes. Used for Amakusa-like Soft Porcelains” Jounal of the European Ceramic Society, 20(12), 2225-2231, 2000.
  • [9]Pekkan, K., “The Thermal and Microstructural behavior of a R2O–RO–(ZnO)–Al2O3–(TiO2)–SiO2 Based Macro-Crystalline Raw Glaze System” Ceramics International, 41(6), 7881–7889, 2015.
  • [10]Kartal, A., “Sır ve Sırlama Tekniği” Çizgi Matbaacılık, Ankara, 1998.
  • [11]Karasu, B., Turan, S., “Effects of Cobalt, Copper, Manganese and Titanium Oxide Additions on the Microstructures of Zinc Containing Soft Porcelain Glazes” Jounal of the European Ceramic Society, 22(9), 1447–1455, 2002.
  • [12]Pekkan, K., Taşçı, E, Gün, Y., “The Effect of ZnO on Development of Crystals in Crystal Glaze Applications” Journal of the Faculty of Engineering and Architecture of Gazi University, 30(2), 2015.
  • [13]Taylor, J.R., Bull, A.C., “Ceramics Glaze Technology” Oxford, Pergamon Books Inc.,Elmsford, NY, United States, 1986.
  • [14]Göncü, Y., “Investigation of the Usage of Wastes Containing ZnO in Crystal Glazes” Anadolu University, Graduate School of Sciences, Master of Science Thesis, Ceramic Engineering Program, Eskişehir, 2006.
  • [15]Gozalbo, A., Orts, M.J., Mestre, S., Gómez, P., Agut, P., Lucas, F., Blanco, C., “Ceramic Glazes With Aventurine Effect” In Qualicer 2006. IX World Congress on Ceramic Tile Quality, Castellon, Spain, Vol. 2, 189-202, 2006.
  • [16]Pekkan, K., Gün, Y., Taşçı, E., Gülaçtı, N., “Large Individual Crystals For Floor Tile Bodies” International Porous Powder Materials Symposium and Exhibition, İzmir, Türkiye, 450-455, 2015.
  • [17]Pekkan, K., Taşçı, E., Gülaçtı, E., Ürersoy, Y., Gün, Y., Ateş, H.A., “The Evaluatıon of Frit Based Artistic Crystalline Glaze Systems Using as Industrial Floor Tile Glazes” Scientific Research Project, Project Final Report, 2014-48. 2014.
  • [18]Rudkovskaya, N.V., “Mikhailenko, N.Y., Decorative Zinc-Containing Crystalline Glazes for Ornamental Ceramics (A Review)” Glass and Ceramics, 58(11), 387–390, 2001.
  • [19]Escardino, A., Amoros, J.L., Gozalbo, A., Orts, M.J., Moreno, A., “Gahnite devitrification in ceramic frits: mechanism and process kinetics” Journal of American Ceramic Society, 83(12), 2938–2944, 2000.
  • [20]Lewis, M.H., “Glasses and Glass Ceramics” Chapman and Hall, New York, 1989.
  • [21]Mirhadi, B., Mehdikhani, B., “Crystallization behavior and microstructure of (CaO•ZrO2•SiO2)–Cr2O3-based glasses” Journal of Non-Crystalline Solids, 357(22), 3711–3716, 2011.
  • [22]Kingery, W.D., Bowen, H.K., Uhlmann, D.R., “Introduction to Ceramics” John Wiley and Sons, New York, 1976.
Toplam 22 adet kaynakça vardır.

Ayrıntılar

Birincil Dil İngilizce
Konular Mühendislik
Bölüm Diğer Bölümler
Yazarlar

Keriman Pekkan

Yalçın Gün

Yayımlanma Tarihi 30 Haziran 2018
Kabul Tarihi 7 Haziran 2018
Yayımlandığı Sayı Yıl 2018 Cilt: 7 Sayı: 1

Kaynak Göster

APA Pekkan, K., & Gün, Y. (2018). Effect of Different Metal Oxides On Vickers Hardness of the Frit Based Crystalline Glazes. Nevşehir Bilim Ve Teknoloji Dergisi, 7(1), 32-40. https://doi.org/10.17100/nevbiltek.368987
AMA Pekkan K, Gün Y. Effect of Different Metal Oxides On Vickers Hardness of the Frit Based Crystalline Glazes. Nevşehir Bilim ve Teknoloji Dergisi. Haziran 2018;7(1):32-40. doi:10.17100/nevbiltek.368987
Chicago Pekkan, Keriman, ve Yalçın Gün. “Effect of Different Metal Oxides On Vickers Hardness of the Frit Based Crystalline Glazes”. Nevşehir Bilim Ve Teknoloji Dergisi 7, sy. 1 (Haziran 2018): 32-40. https://doi.org/10.17100/nevbiltek.368987.
EndNote Pekkan K, Gün Y (01 Haziran 2018) Effect of Different Metal Oxides On Vickers Hardness of the Frit Based Crystalline Glazes. Nevşehir Bilim ve Teknoloji Dergisi 7 1 32–40.
IEEE K. Pekkan ve Y. Gün, “Effect of Different Metal Oxides On Vickers Hardness of the Frit Based Crystalline Glazes”, Nevşehir Bilim ve Teknoloji Dergisi, c. 7, sy. 1, ss. 32–40, 2018, doi: 10.17100/nevbiltek.368987.
ISNAD Pekkan, Keriman - Gün, Yalçın. “Effect of Different Metal Oxides On Vickers Hardness of the Frit Based Crystalline Glazes”. Nevşehir Bilim ve Teknoloji Dergisi 7/1 (Haziran 2018), 32-40. https://doi.org/10.17100/nevbiltek.368987.
JAMA Pekkan K, Gün Y. Effect of Different Metal Oxides On Vickers Hardness of the Frit Based Crystalline Glazes. Nevşehir Bilim ve Teknoloji Dergisi. 2018;7:32–40.
MLA Pekkan, Keriman ve Yalçın Gün. “Effect of Different Metal Oxides On Vickers Hardness of the Frit Based Crystalline Glazes”. Nevşehir Bilim Ve Teknoloji Dergisi, c. 7, sy. 1, 2018, ss. 32-40, doi:10.17100/nevbiltek.368987.
Vancouver Pekkan K, Gün Y. Effect of Different Metal Oxides On Vickers Hardness of the Frit Based Crystalline Glazes. Nevşehir Bilim ve Teknoloji Dergisi. 2018;7(1):32-40.

Dergimizin tarandığı indeksler


12300          20980     2097822081