Li-iyon piller için kalay esaslı grafen kompozit anotun yapısal ve elektrokimyasal karakterizasyonu

Yıl 2017, Cilt: 23 Sayı: 8, 941 - 944, 28.12.2017

Miraç Alaf Gizem Hatipoğlu Ubeyd Toçoğlu Hatem Akbulut

Öz

Bu
çalışmada, ultrasonik prosesör destekli solüsyon esaslı bir kimyasal yöntem
Li-iyon piller için kalay esaslı grafen kompozit elektrotların sentezi için
geliştirilmiştir. Hummers metodu ile pulcuk grafitten üretilen grafen
tabakaları üzerine SnCl₂.2H₂O başlangıç malzemesi
kullanılarak SnO₂ nanotozları büyütülmüştür. Kompozit elektrotlar
taramalı elektron mikroskobu (SEM), X-ışını difraktometresi ve termal analiz
teknikleri ile karakterize edilmiştir. Üretilen kompozit elektrotlar CR2016
Li-iyon düğme tipi hücreye anot olarak bağlanmış ve şarj-deşarj çevrim testleri
ve çevrimli voltametre analizleri yapılmıştır. Yüksek performanslı kalay esaslı
elektrot malzemesinin hacim genleşmesi problemini aşmak için malzemenin grafen
tabakaları üzerine büyütülmesi ile uzun çevrim ömrü elde edilmiştir. Tek adımda
üretilen SnO₂-grafen nanokompozitinden hazırlanan
elektrottan 100 çevrim sonunda 385 mAhg^-1 değerinde spesifik
kapasite elde edilmiştir.

Anahtar Kelimeler

Kalay oksit, Grafen, Ultrasonik destekli, Li-iyon pil

Structural and electrochemical characterization of tin based graphene composite anode for li-ion batteries

Öz

In
this study, ultrasound assisted solution based chemical synthesis method has
been developed to synthesize tin based graphene composite electrodes for Li-ion
batteries. SnO₂ was grown by using SnCl₂.2H₂O
precursor material on graphene layers was produced Hummers method by using
flake graphite. The composite electrodes were characterized with scanning
electron microscopy (SEM), X-ray diffractometer and thermal analysis methods.
The produced composite electrodes were connected to CR2016 button cells as
anode and carried out charge-discharge and cyclic voltammeter tests. Long cycle
life was achieved by growing tin based electrode materials with high
performance on graphene layers to overcome volume expansion problem. The
electrode prepared one-step synthesized SnO₂-graphene nanocomposite
has shown 385 mAhg^-1 specific capacity value after 100
cycles.

Anahtar Kelimeler

Tin oxide, Graphene, Ultrasound assisted, Li-ion battery

Kaynakça

• Mukherjee R, Krishnan R, Lu T H. Koratkar N. "Nanostructured electrodes for high-power lithium ion batteries". Nano Energy, 1(4), 518-533, 2012.
• Song M, Park S, Alamgir FM, Cho J, Liu M. "Nanostructured electrodes for lithium-ion and lithium-air batteries: the latest developments, challenges, and perspectives". Materials Science and Engineering R, 72, 203-252, 2011.
• Sivashanmugam A, Kumar TP, Renganathan NG, Gopukumar S, Wohlfahrt-Mehrens M, Garche J. "Electrochemical behavior of Sn/SnO2 mixtures for use as anode in lithium rechargeable batteries". Journal of Power Sources, 144, 197-203, 2005.
• Liu G, Shen X, Ui K, Wang L, Kumagai N. "Influence of the binder types on the electrochemical characteristics of tin nanoparticle negative electrode for lithium secondary batteries". Journal of Power Sources, 217, 108-113, 2012.
• Yan X, Teng D, Jia X, Yu Y, Yang X. "Improving the cyclability and rate capability of carbon nanofiberanodes through in-site generation of SiOx-rich overlayers". Electrochimica Acta, 108, 196-202, 2013,
• Zhong C, Wang J Z, Wexler D, Liu HK. "Microwave autoclave synthesized multi-layer graphene/single-walled carbon nanotube composites for free-standing lithium-ion battery anodes". Carbon, 66, 637-645, 2014.
• Nobili F, Meschini I, Mancini M, Tossici R, Marassi R, Croce F. "High-performance Sn@carbon nanocomposite anode for lithium-ion batteries: Lithium storage processes characterization and low-temperature behavior". Electrochimica Acta, 107, 85-92, 2013.
• Jeun J H, Kim WS, Hong SH. "Electrophoretic deposition of carbon nanoparticles on dendritic Sn foams fabricated by electrodeposition". Materials Letters, 112, 109-112, 2013.
• Wang X, Zhou X, Yao K, Zhang J, Liu Z. "A SnO2/graphene composite as a high stability electrode for lithium ion batteries", Carbon, 49, 133-139, 2011.
• Yang S, Song H, Yi H, Liu W, Zhang H, Chen X. "Carbon nanotube capsules encapsulating SnO2 nanoparticles as an anode material for lithium ion batteries". Electrochimica Acta, 55, 521-527, 2009.
• Zhao LZ, Hu SJ, Ru Q, Li WS, Hou XH, Zeng RH, Lu DS. "Effects of graphite on electrochemical performance of Sn/C composite thin film anodes". Journal of Power Sources, 184, 481-484, 2008.
• Xiao W, Wang Z, Guo H, Li X, Wang J, Huang S, Gan L. "Fe2O3 particles enwrapped by graphene with excellent cyclability and rate capability as anode materials for lithium ion batteries". Applied Surface Science, 266, 148- 154, 2013.
• Wen Y, Huang C, Wang L, Hulicova-Jurcakova D. "Heteroatom-doped graphene for electrochemical energy storage". Chinese Science Bulletin, 59, 2102-2121, 2014.
• Zhong C, Wang JZ, Wexler D, Liu HK. "Microwave autoclave synthesized multi-layer graphene/single-walled carbon nanotube composites for free-standing lithium-ion battery anodes". Carbon, 66, 637-645, 2014.
• Zhou H, Yang X, Lv J, Dang Q, Kang L, Lei Z, Yang Z, Hao Z, Liu Z. "Graphene/MnO2 hybrid film with high capacitive performance" Electrochimica Acta, 154, 300-307, 2015.
• Wu Z, Li X, Tai L, Song H, Zhang Y, Yan B, Fan L, Shan H, Li D. "Novel synthesis of tin oxide/graphene aerogel nanocomposites as anode materials for lithium ion batteries". Journal of Alloys and Compounds, 646, 1009-1014, 2015.
• Lai Y, Chen W, Zhang Z, Qu Y, Gan Y, Li J. "Fe/Fe3C decorated 3-D porous nitrogen-doped graphene as a cathode material for rechargeable Li-O2 batteries". Electrochimica Acta 191, 733-742, 2016.
• Ren M, Yang M, Liu W, Li M, Su L, Qiao C, Wu X, Ma H. "Ultra-small Fe3O4 nanocrystals decorated on 2D graphene nanosheets with excellent cycling stability as anode materials for lithium ion batteries". Electrochimica Acta, 194, 219-227, 2016.
• Du D, Yue W, Fan X, Tang K, Yanga X. "Ultrathin NiO/NiFe2O4 Nanoplates Decorated Graphene Nanosheets with Enhanced Lithium Storage Properties". Electrochimica Acta, 194, 17-25, 2016.
• Hummers WS, Offeman RE. "Preparation of graphitic oxide". Journal American Chemical Society, 80, 1339-1339, 1958.
• Hummers Jr WS, Offeman RE. “Preparation of graphitic oxide”. Journal of the American Chemical Society 80(6),1339-1339, 1958.
• Liu L, Xie F, Lyu J, Zhao T, Li T, Choi B. "Tin-based anode materials with well-designed architectures for nextgeneration lithium-ion batteries". Journal of Power Sources, 321, 11-35, 2016.
• Deosarkar MP, Pawar SM, Sonawane SH, Bhanvase BA. "Process intensification of uniform loading of SnO2 nanoparticles on graphene oxide nanosheets using a novel ultrasound assisted in situ chemical precipitation method". Chemical Engineering and Processing, 70, 48-54, 2014.
• Huang R, Wang L, Zhang Q, Chen Z, Li Z, Pan D, Zhao B, Wu M, Wu L, Shek C. "Irradiated Graphene Loaded with SnO2 Quantum Dots for Energy Storage". ACS Nano, 9, 11351-11361, 2015.
• Zang H, Song H, Chen X, Zhou J, Zhang H, "Preparation and electrochemical performance of SnO2@carbon nanotube core-shell structure composites as anode material for lithium-ion batteries". Electrochimica Acta, 59, 160-167, 2016.