Enhancement in air-cooling of lithium-ion battery packs using tapered airflow duct

Yıl 2024, Cilt: 10 Sayı: 2, 375 - 385, 22.03.2024

Vivek K. Satheesh Navneet Krıshna Prakhar Singh Kushwah Ishan Garg Sharmista Raı Gurumoorthy S. Hebbar Dileep V. Naır

https://doi.org/10.18186/thermal.1448648

Öz

Temperature uniformity and peak-temperature reduction of lithium-ion battery packs are critical for adequate battery performance, cycle life, and safety. In air-cooled battery packs that use conventional rectangular ducts for airflow, the insufficient cooling of cells near the duct outlet leads to temperature nonuniformity and a rise in peak temperature. This study proposes a simple method of using a converging, tapered airflow duct to attain temperature uniformity and reduce peak temperature in air-cooled lithium-ion battery packs. The conjugate forced convection heat transfer from the battery pack was investigated using computational fluid dynamics, and the computational model was validated using experimental results for a limiting case. The proposed converging taper provided to the airflow duct reduced the peak temperature rise and improved the temperature uniformity of the batteries. For the conventional duct, the boundary layer development and the increase in air temperature downstream resulted in hotspots on cells near the outlet. In contrast, for the proposed tapered duct, the flow velocity increased downstream, resulting in improved heat dissipation from the cells near the outlet. Furthermore, the study investigated the effects of taper angle, inlet velocity, and heat generation rate on the flow and thermal fields. Notably, with the increase in taper angle, owing to the increase in turbulent heat transfer near the exit, the location of peak temperature shifted from the exit region to the central region of the battery pack. The taper-induced improvement in cooling was evident over the entire range of inlet velocities and heat generation rates investigated in the study. The peak temperature rise and maximum temperature difference of the battery pack were reduced by up to 20% and 19%, respectively. The proposed method, being effective and simple, could find its application in the cooling arrangements for battery packs in electric vehicles.

Anahtar Kelimeler

Battery Thermal Management, Computational Fluid Dynamics, Lithium-ion Battery, Temperature Uniformity

Kaynakça

• [1] Rao Z, Wang S. A review of power battery thermal energy management. Renew Sust Energ Rev 2011;15:4554–4571. [CrossRef]
• [2] Na X, Kang H, Wang T, Wang Y. Reverse layered air flow for Li-ion battery thermal management. Appl Therm Eng 2018;143:257–262. [CrossRef]
• [3] Ma S, Jiang M, Tao P, Song C, Wu J, Wang J, Deng T, Shang W. Temperature effect and thermal impact in lithium-ion batteries: A review. Prog Nat Sci: Mater Int 2018;28:653–666. [CrossRef]
• [4] Panchal S, Mathewson S, Fraser R, Culham R, Fowler M. Measurement of temperature gradient (dT/dy) and temperature response (dT/dt) of a prismatic lithium-ion pouch cell with LiFePO4 cathode material. SAE Tech Pap 2017. [CrossRef]
• [5] Thakur AK, Prabakaran R, Elkadeem MR, Sharshir SW, Arıcı M, Wang C, et al. A state of art review and future viewpoint on advance cooling techniques for Lithium–ion battery system of electric vehicles. J Energy Storage 2020;32:101771. [CrossRef]
• [6] Wang T, Tseng KJ, Zhao J. Development of efficient air-cooling strategies for lithium-ion battery module based on empirical heat source model. Appl Therm Eng 2015;90:521–529. [CrossRef]
• [7] Chen D, Jiang J, Kim GH, Yang C, Pesaran A. Comparison of different cooling methods for lithium ion battery cells. Appl Therm Eng 2016;94:846–854. [CrossRef]
• [8] Yu K, Yang X, Cheng Y, Li C. Thermal analysis and two-directional air flow thermal management for lithium-ion battery pack. J Power Sources 2014;270:193–200. [CrossRef]
• [9] Mahamud R, Park C. Reciprocating air flow for Li-ion battery thermal management to improve temperature uniformity. J Power Sources 2011;196:5685–5696. [CrossRef]
• [10] Li X, Zhao J, Yuan J, Duan J, Liang C. Simulation and analysis of air cooling configurations for a lithium-ion battery pack. J Energy Storage 2021;35:102270. [CrossRef]
• [11] Zhang SB, He X, Long NC, Shen YJ, Gao Q. Improving the air-cooling performance for lithium-ion battery packs by changing the air flow pattern. Appl Therm Eng 2023;221:119825. [CrossRef]
• [12] Wang N, Li C, Li W, Huang M, Qi D. Effect analysis on performance enhancement of a novel air cooling battery thermal management system with spoilers. Appl Therm Eng 2021;192:116932. [CrossRef]
• [13] Ibrahim M, Saeed T, El-Shorbagy MA, Nofal TA, Aamir N. Study of pressure drop and heat transfer in cooling of lithium-ion battery with rhombic arrangement with two different outlets and different inlet dimensions. J Energy Storage 2022;50:104255. [CrossRef]
• [14] Park H. A design of air flow configuration for cooling lithium ion battery in hybrid electric vehicles. J Power Sources 2013;239:30–36. [CrossRef]
• [15] Zhang J, Kang H, Wu K, Li J, Wang Y. The impact of enclosure and boundary conditions with a wedge‐shaped path and air cooling for battery thermal management in electric vehicles. Int J Energy Res 2018;42:4054–4069. [CrossRef]
• [16] Saw LH, Ye Y, Tay AA, Chong WT, Kuan SH, Yew MC. Computational fluid dynamic and thermal analysis of Lithium-ion battery pack with air cooling. Appl Energy 2016;177:783–792. [CrossRef]
• [17] Lu Z, Meng XZ, Wei LC, Hu WY, Zhang LY, Jin LW. Thermal management of densely-packed EV battery with forced air cooling strategies. Energy Procedia 2016;88:682–688. [CrossRef]
• [18] Xu XM, He R. Research on the heat dissipation performance of battery pack based on forced air cooling. J Power Sources 2013;240:33–41. [CrossRef]
• [19] Zhou H, Zhou F, Xu L, Kong J. Thermal performance of cylindrical Lithium-ion battery thermal management system based on air distribution pipe. Int J Heat Mass Transf 2019;131:984–998. [CrossRef]
• [20] Yang T, Yang N, Zhang X, Li G. Investigation of the thermal performance of axial-flow air cooling for the lithium-ion battery pack. Int J Therm Sci 2016;108:132–144. [CrossRef]
• [21] Fan Y, Bao Y, Ling C, Chu Y, Tan X, Yang S. Experimental study on the thermal management performance of air cooling for high energy density cylindrical lithium-ion batteries. Appl Therm Engineer 2019;155:96–109. [CrossRef]
• [22] Singh LK, Gupta AK, Sharma AK. Hybrid thermal management system for a lithium-ion battery module: Effect of cell arrangement, discharge rate, phase change material thickness and air velocity. J Energy Storage 2022;52:104907. [CrossRef]
• [23] Li F, Ibrahim M, Saeed T, El-Refaey AM, Fagiry MA, Elkhader BA. Numerical simulation of air outlet spacing change in thermal management lithium-ion battery pack with triangular arrangement for use in electric vehicles. J Energy Storage 2022;49:104117. [CrossRef]
• [24] Alharbi KA, Smaisim GF, Sajadi SM, Fagiry MA, Aybar HŞ, Elkhatib SE. Numerical study of lozenge, triangular and rectangular arrangements of lithium-ion batteries in their thermal management in a cooled-air cooling system. J Energy Storage 2022;52:104786. [CrossRef]
• [25] Abusorrah AM, Mebarek-Oudina F, Ahmadian A, Baleanu D. Modeling of a MED-TVC desalination system by considering the effects of nanoparticles: energetic and exergetic analysis. J Therm Anal Calorim 2021;144:2675–2687. [CrossRef]
• [26] Gourari S, Mebarek-Oudina F, Makinde OD, Rabhi M. Numerical investigation of Gas-Liquid Two-Phase flows in a cylindrical channel. Defect Diffus Forum 2021;409:39–48. [CrossRef]
• [27] Al-Turki YA, Mebarek-Oudina F, Ahmadian A, Baleanu D. Flat sheet direct contact membrane distillation desalination system using temperature-dependent correlations: thermal efficiency via a multi-parameter sensitivity analysis based on Monte Carlo method. J Therm Anal Calorim 2021;144:2641–2652. [CrossRef]
• [28] Hai T, Abidi A, Abed AM, Zhou J, Malekshah EH, Aybar HŞ. Three-dimensional numerical study of the effect of an air-cooled system on thermal management of a cylindrical lithium-ion battery pack with two different arrangements of battery cells. J Power Sources 2022;550:232117. [CrossRef]
• [29] Jiaqiang E, Yue M, Chen J, Zhu H, Deng Y, Zhu Y, et al. Effects of the different air cooling strategies on cooling performance of a lithium-ion battery module with baffle. Appl Therm Eng 2018;144:231–241. [CrossRef]
• [30] Zhang F, Lin A, Wang P, Liu P. Optimization design of a parallel air-cooled battery thermal management system with spoilers. Appl Therm Eng 2021;182:116062. [CrossRef]
• [31] Yang W, Zhou F, Zhou H, Liu Y. Thermal performance of axial air cooling system with bionic surface structure for cylindrical lithium-ion battery module. Int J Heat Mass Transf 2020;161:120307. [CrossRef]
• [32] Mansir IB, Sinaga N, Farouk N, Aljaghtham M, Diyoke C, Nguyen DD. Numerical simulation of dimensions and arrangement of triangular fins mounted on cylindrical lithium-ion batteries in passive thermal management. J Energy Storage 2022;50:104392. [CrossRef]
• [33] Sharma DK, Prabhakar A. A review on air cooled and air centric hybrid thermal management techniques for Li-ion battery packs in electric vehicles. J Energy Storage 2021;41:102885. [CrossRef]
• [34] Tang Z, Gao Q, Li J, Cheng J. Numerical analysis of temperature uniformity of liquid cooling based battery module with incremental heat transfer area. J Therm Sci Eng Appl 2020;12:051006. [CrossRef]
• [35] Kumar B, Mittal S. Prediction of the critical Reynolds number for flow past a circular cylinder. Comput Methods Appl Mech Eng 2006;195:6046–6058. [CrossRef]
• [36] Standard k-epsilon Model. Available at: https://www.afs.enea.it/project/neptunius/docs/fluent/html/th/node58.htm. Accessed March 10, 2022.
• [37] ANSYS FLUENT User’s Guide – Judging Convergence. Available at: https://www.afs.enea.it/project/neptunius/docs/fluent/html/ug/node833.htm Accessed March 10, 2022.
• [38] Stanescu G, Fowler AJ, Bejan A. The optimal spacing of cylinders in free-stream cross-flow forced convection. Int J Heat Mass Transf 1996;39:311–317. [CrossRef]