Impact of nano-silica (SiO2) on thermic properties of concrete

Yıl 2024, Cilt: 10 Sayı: 3, 746 - 755, 21.05.2024

Alaa N. Saleh Omer Ahmed Alyaa A. Attar Abdullah A. Abdullah

Öz

The application of nanotechnology in the field of Buildings and concrete Build is one of the main goals of this article because of the technology’s role in enhances the properties of concrete and increasing the efficiency of building materials, as well as in preserving natural resources, reducing environmental pollutants, and increasing the attention that nanotechnology is currently receiving in various fields of science and engineering applications. By partially replacing cement with silica nanoparticles, the current research is focused on investigate the impact of silica nanoparticles (SiO2) on the concrete thermic properties, including specific heat capacity (SHC), thermic conductivity, and thermic diffusivity, in order to produce light-weight concrete with good thermal insulation capabilities. In order to replace a portion of the concrete’s weight, nano-silica (NS) was added in percentages of 1%, 2%, and 3%. The results showed that the mixtures including nano-silica had lower thermic conductivity coefficient values, ranging from 0.5 to 0.92 W/m °C. This indicates that the thermic insulation capacity of nano-concrete increased by 41.8 percent, 53.15 percent, and 65.57 percent, respectively. Furthermore, based on the data, Thermal conductivity coefficient’s can be lowest value at a ratio of (3%). As a result, replacing concrete beyond this proportion will result in a reduction in its various qualities. Furthermore, a reduction in the specific thermic ability values was noted in contrast to traditional concrete.

Anahtar Kelimeler

Concrete, Nano-Silica, Specific Heat, Thermal Conductivity, Thermal Properties

Kaynakça

• [1] Ali MM, Ahmed OK, Abbas EF. Performance of solar pond integrated with photovoltaic/thermal collectors. Energy Rep 2020;6:3200–3211. [CrossRef]
• [2] Martínez-Molina A, Tort-Ausina I, Cho S, Vivancos JL. Energy efficiency and thermal comfort in historic buildings: A review. Renew Sustain Energy Rev 2016;61:70–85. [CrossRef]
• [3] De Giuli V, Da Pos O, De Carli M. Indoor environmental quality and pupil perception in Italian primary schools. Build Environ 2012;56:335–345. [CrossRef]
• [4] Mohammed F, Khalil O, Emad A. Effect of climate and design parameters on the temperature distribution of a room. J Build Engineer 2018;17:115–124. [CrossRef]
• [5] Holman JP. Heat Transfer. 10th ed. New York: McGraw-Hill Education; 2009.
• [6] Xu Y, Chung DDL. Cement of high specific heat and high thermal conductivity, obtained by using silane and silica fume as admixtures. Cem Concr Res 2000;30:1175–1178. [CrossRef]
• [7] Kilic M, Abdulvahitoğlu A. Numerical investigation of heat transfer at a rectangular channel with combined effect of nanofluids and swirling jets in a vehicle radiator. Therm Sci 2018;2018:3627–3637. [CrossRef]
• [8] Kilic M, Ali HM. Numerical investigation of combined effect of nanofluids and multiple impinging jets on heat transfer. Therm Sci 2018;2018:3165–3173. [CrossRef]
• [9] Ragupathi P, Abdul Hakeem AK, Saranya S, Ganga B. Non-Darcian three-dimensional flow of Fe3O4/Al2O3 nanoparticles with H2O/NaC6H9O7 base fluids past a Riga plate embedded in a porous medium. Eur Phys J Spec Top 2019;228:2571–2600. [CrossRef]
• [10] Kilic M. A heat transfer analysis from a porous plate with transpiration cooling. Therm Sci 2018;2018:1632–1647. [CrossRef]
• [11] Saranya S, Ragupathi P, Ganga B, Sharma RP, Abdul Hakeem AK. Non-linear radiation effects on magnetic/non-magnetic nanoparticles with different base fluids over a flat plate. Adv Powder Technol 2018;29:1977–1990. [CrossRef]
• [12] Ragupathi P, Abdul Hakeem AK, Al-Mdallal QM, Ganga B, Saranya S. Non-uniform heat source/sink effects on the three-dimensional flow of Fe3O4 /Al2O3 nanoparticles with different base fluids past a Riga plate. Case Stud Therm Engineer 2019;15:100521. [CrossRef]
• [13] Abdul Hakeem AK, Ragupathi P, Saranya S, Ganga B. Three dimensional non-linear radiative nanofluid flow over a Riga plate. J Appl Comput Mech 2020;6:1012–1029.
• [14] Jaishankar P, Karthikeyan C. Characteristics of cement concrete with nano alumina particles. IOP Conf Ser Earth Environ Sci 2017;80:012005. [CrossRef]
• [15] Sikora P, Horszczaruk E, Skoczylas K, Rucinska T. Thermal properties of cement mortars containing waste glass aggregate and nanosilica. Procedia Engineer 2017;196:159–166. [CrossRef]
• [16] Jittabut P. Effect of nanosilica on mechanical and thermal properties of cement composites for thermal energy storage materials. Energy Procedia 2015;79:10–17. [CrossRef]
• [17] Al Zaidi AK, Demirel B, Atis CD. Effect of different storage methods on thermal and mechanical properties of mortar containing aerogel, fly ash and nano-silica. Constr Build Mater 2019;199:501–507. [CrossRef]
• [18] Zhang Y, Ma G, Liu Y, Li Z. Mix design for thermal insulation concrete using waste coal gangue as aggregate. Mater Res Innov 2015;19:S5878–S5884. [CrossRef]
• [19] Wang WC. Compressive strength and thermal conductivity of concrete with nanoclay under various high-temperatures. Constr Build Mater 2017;147:305–311. [CrossRef]
• [20] Yuan H, Shi Y, Xu Z, Lu C, Ni Y, Lan X. Effect of nano-MgO on thermal and mechanical properties of aluminate cement composite thermal energy storage materials. Ceram Int 2014;40:4811–4817. [CrossRef]
• [21] Reddy LSI, Vijayalakshmi MM, Praveenkumar TR. Thermal conductivity and strength properties of nanosilica and GGBS incorporated concrete specimens. Silicon. 2020;14:145–151. [CrossRef]
• [22] Vanitha N, Revathi T, Gopalakrishnan R, Jeyalakshmi R. Effect of TiO2, Al2O3 and CaCO3 nano-additives in singular, binary and ternary forms on the mechanical, thermal and microstructural properties of fly ash supplemented cement matrix. Mater Today Proc 2021;47:871–879. [CrossRef]
• [23] Kaya A, Kar F. Properties of concrete containing waste expanded polystyrene and natural resin. Constr Build Mater 2016;105:572–578. [CrossRef]
• [24] Boussetoua H, Maalouf C, Lachi M, Belhamri A, Moussa T. Mechanical and hygrothermal characterisation of cork concrete composite: Experimental and modelling study. Eur J Environ Civ Engineer 2020;24:456–471. [CrossRef]
• [25] Shaikh FUA, Hosan A. Effect of nano alumina on compressive strength and microstructure of high volume slag and slag-fly ash blended pastes. Front Mater 2019;6:00090. [CrossRef]
• [26] Khazaal AS, Ali AA, Lateef AM. Mechanical properties of self-compacted concrete. Tikrit J Engineer Sci 2016;23:40–52. [CrossRef]
• [27] Shather DM. Estimation and Standard Specifications Book. Kufa, Iraq: Kufa University Publication; 2013.
• [28] HONGWUNEWMATERIAL. Silicon dioxide nanomaterials. Available at: https://www.hwnanomaterial.com. Accessed May 16, 2024.
• [29] Sakthivel R, Balasundaram N. Experimental investigation on behaviour of nano concrete. Int J Civ Engineer Technol 2016;7:315–320.
• [30] Kim KH, Jeon SE, Kim JK, Yang S. An experimental study on thermal conductivity of concrete. Cem Concr Res 2003;33:363–371. [CrossRef]
• [31] Gandage AS, Rao VRV, Sivakumar MVN, Vasan A, Venu M, Yaswanth AB. Effect of perlite on thermal conductivity of self compacting concrete. Procedia Soc Behav Sci 2013;104:188–197. [CrossRef]
• [32] Shafigh P, Asadi I, Mahyuddin NB. Concrete as a thermal mass material for building applications - A review. J Build Engineer 2018;19:14–25. [CrossRef]
• [33] Sha P, Asadi I. Concrete as a thermal mass material for building applications - A review. J Build Engineer 2018;19:14–25. [CrossRef]
• [34] Carman AP, Nelson RA. The Thermal Conductivity and Diffusivity of Concrete (1921). Whitefish, Montana: Kessinger Publishing; 2008.
• [35] Taoukil D, El Bouardi A, Sick F, Mimet A, Ezbakhe H, Ajzoul T. Moisture content influence on the thermal conductivity and diffusivity of wood-concrete composite. Constr Build Mater 2013;48:104–115. [CrossRef]