Araştırma Makalesi
BibTex RIS Kaynak Göster
Yıl 2019, Cilt: 3 Sayı: 2, 51 - 59, 01.04.2019

Öz

Kaynakça

  • Akgün, B., Çamurlu, H.E., Topkaya, Y., Sevinç, N. (2011). “Mechanochemical and volume combustion sythesis of ZrB2.” International Journal of Refractory Metals and Hard Materials, Vol. 29, pp. 601-607
  • Aouici, H., Bouchelaghem, H. Yallese, M. A., Elbah, M., Fnides, B. (2014) “ Machinability investigation in hard turning of AISI D3 cold work steel with ceramic tool using response surface methodology.” InternationalJournal of Advanced Manufacturing Technology, Vol.73, pp. 1775–1788.
  • Avar, B., Ozcan, Ş. (2015). “Characterization and amorphous phase formation of mechanically alloyed Co60Fe5Ni5Ti25B5 powders.” Journal of Alloys and Compounds Vol. 650, pp. 53-58.
  • Baudis, U., Fitchte, R. (1985). Boric oxide and boric acid and borates, Schwetz, KA, Lipp A, Capbll FT, Pfefferkom R(Eds.). Boron carbide, boron nitride, and metal borides, Zirconium and zirconium compounds, Ullmann's Encyclopedia of Industrial Chemistry, Fifth, Completely Revised Edition A4, Wiley-VCH, Weinheim, 263-307, 91.
  • Berger, L.M. (2015). “Application of hardmetals as thermal spray coatings.” International Journal of Refractory Metals and Hard Materials, Vol. 49, pp. 350–364.
  • Buldum, B.B., Şık, A., Ozkul, I. (2012). “Investigation of Magnesium Alloys Machinability.” International Journal Of Electronics; Mechanical And Mechatronics Engineering, Vol.2, pp. 261-268.
  • Bouzakis, K.D., Charalampous, P., Kotsanis, T., Skordaris, G., Bouzakis, E., Denkena, B., Breidenstein, B., Aurich, J.C., Zimmermann, M., Herrmann, T., M’saoubi R. (2017). “Effect of HM substrates’ cutting edge roundness manufactured by laser machining and micro-blasting on the coated tools’ cutting performance.” CIRP Journal of Manufacturing Science and Technology, Vol. 18, pp. 188–197.
  • Cheng, E. J., Li., J., Sakamoto, Y.., Han, S., Sun, H., Noble, J., Katsui, H., Goto, T. (2017). “Mechanical properties of individual phases of ZrB2-ZrC eutectic composite measured by nano indentation.” Journal of the European Ceramic Society, Vol. 37, pp. 4223-4227.
  • Chi, Y., Gu, G., Yu, H., Chen, C. (2018). “Laser surface alloying on aluminum and its alloys: A review.” Optics and Lasers in Engineering, Vol. 100, pp. 2337.
  • Dangio, A., Zoua, J., Binner, J., Ma, H.B., Hilmas, G.E., Fahrenholtz, W.G. (2018). “Mechanical properties and grain orientation evolution of zirconium diboridezirconium carbide ceramics.” Journal of the European Ceramic Society, Vol. 38, pp. 391-402.
  • Dai, X., Yan, D., Yang, Y., Chu, Z., Chen, X., Song, J. (2017). “In situ (Al,Cr)2O3-Cr composite coatingfabricated by reactive plasma Spraying.” Ceramic International, Vol. 43, pp. 6340-6344.
  • Fahrenholtz, W.G., Hilmas, G.E. (2007). “Refractory Diborides of Zirconium and Hafnium”, Journal of American Ceramic Society, Vol. 90(5), pp. 1347-1364.
  • Hascalik, A., Caydas¸ A. (2004). “Experimental study of wire electrical discharge machining of AISI D5 tool steel.” Journal of Materials Processing Technology, Vol. 148, pp. 362–367.
  • Hashemi, S.H., Shoja-Razavi, R. (2016). “Laser surface heat treatment of electroless Ni–P–SiC coating on Al356 alloy.” Optics and Laser Technology, Vol. 85, pp. 1–6.
  • Han, Y.G., Yang, Y., Wang, L., Chen, X.G., Chu, Z.H., Zhang, X.N., Dong, Y.C., Liu, Z., Yan, D.R. Zhang, J.X., Li, C.G. (2018). “Microstructure and properties of in-situ TiB2 matrix composite coatings prepared by plasma spraying.” Applied Surface Science, Vol. 431, pp. 48-54.
  • Hajdarevic, D. B., Cekic, A., Mehmedovic, M., Djelmica, A. (2015). “Experimental Study on Surface Roughness in Abrasive Water Jet Cutting.” Procedia Engineering Vol. 100, pp. 394 – 399.
  • Jalaly, M,, Bafghi, M.Sh., Tamizifar, M., Gotor, F.J. (2013). “Mechanosynthesis of nanocrystalline ZrB2- based powders by mechanically induced self-sustaining reaction method.” Advanced in Applied Ceramics, Vol. 112 (7), pp. 383-388.
  • Guo, W.M., Zhang, G.J. (2009). “Reaction Processes and Characterization of ZrB2 Powder Prepared by Boro/Carbothermal Reduction of ZrO2 in Vacuum.” Journal of the American Ceramic Society, Vol. 92, pp. 264–267.
  • Kumar, A., Singh, H., Kumar, V. (2017). “Study the parametric effect of abrasive water jet machining on surface roughness of Inconel 718 using RSM-BBD techniques.” Materials and Manufacturing Processes, pp. 1-7.
  • Liu, C., Liu, Z., Wang, B. (2018). “Modification of surface morphology to enhance tribological properties for CVD coated cutting tools through wet micro-blasting post-process.” Ceramic International, Vol. 44, pp. 3430-3439.
  • Lu, C., Yao, J.W., Wang, Y.X., Zhu, Y.D., Guo, J.H., Wang, Y., Fu, H.Y., Chen, Z.B., Yan, M.F. (2018) “A novel anti-frictional multiphase layer produced by plasma nitriding of PVD titanium coated ZL205A aluminum alloy.” Applied Surface Science, Vol. 431, pp. 32-38.
  • Masanta, M., Ganesh. P., Kaul, R., Choudhury, A.R. (2010). “Microstructure and mechanical properties of TiB2–TiC–Al2O3-SiC composite coatings developed by combined SHS, sol–gel and laser technology.” Surface and Coatings Technology, Vol. 204, pp. 3471–3480.
  • Neuman, E.W., Hilmas, G.E., Fahrenholtz, W.G. (2017). “Processing, microstructure, and mechanical properties of zirconium diboride-boron carbide ceramics.” Ceramic International, Vol. 43, pp. 6942-6948.
  • Ozkul, I., Buldum, B.B., Akkurt, A. (2013). “Machinabilty of Sleipner Cold Work Steel With Wire Electro Discharge Machining”. International Journal Of Electronics; Mechanical And Mechatronics Engineering, Vol.2, pp. 252-260
  • Pulsford, J., Kamnis, S., Murray, J., Bai1, M., Hussain, T. (2018). “Effect of Particle and Carbide Grain Sizes on a HVOAF WC-Co-Cr Coating for the Future Application on Internal Surfaces: Microstructure and Wear.” Journal of Thermal Spray Technology, Vol. 27, pp. 207–219.
  • Pei, Y.T., Ouyang, J.H, Lei, T.C. (1996). “Laser cladding of ZrO2-(Ni alloy) composite coating.” Surface and Coatings Technology, Vol. 81, pp. 131-135.
  • Peters, J.S., Cook, B.A., Harringa, I., Russell, A.M. (2009). “Erosion resistance of TiB2-ZrB2 composites.” Wear, Vol. 267, pp. 136-143.
  • Pourasad, J., Ehsani, N. (2017). “In-situ synthesis of SiCZrB2 coating by a novel pack cementation technique to protect graphite against oxidation.” Journal of Alloys and Compounds, Vol. 690, pp. 692-698.
  • Puri, A.B., Bhattacharyya, B. (2005). “Modeling and analysis of white layer depth in a wire-cut EDM process through response surface methodology.” International Journal of Advanced Manufacturing Technology, Vol.25, pp. 301–307.
  • Ruppi, S. (2005). “Deposition, microstructure and properties of texture-controlled CVD a-Al2O3 coatings.” International Journal of Refractory Metals and Hard Materials, Vol. 23, pp. 306–316.
  • Siebert, R., Schneider, J., Beyer, E. (2014). “Laser Cutting and Mechanical Cutting of Electrical Steels and its Effect on the Magnetic Properties.” Ieee Transactions On Magnetics, Vol. 50 (4), 2001904-2001908.
  • Suresh, S., Rangarajana, S., Bera, S., Krishnan, R., Amirthapandian, S., Sivakumar, M., Velmurugan, S. (2018). “Evaluation of corrosion resistance of nano nickel ferrite and magnetite double layer coatings on carbon steel.” Thin Solid Films, Vol. 645, pp. 77-86.
  • Sun, C., Xue, Q., Zhang, J., Wan, S., Tieu, A.K., Tran, B.H. (2018). “Growth behavior and mechanical properties of Cr-V composite surface layer on AISI D3 steel by thermal reactive deposition.” Vacuum, Vol. 148 pp. 158-167
  • Sonber, J.K., Suri, A.K. (2011). “Synthesis and Consolidation of Zirconium Diboride: Review.” Advances in Applied Ceramics, Vol. 110 (6), pp. 321-334.
  • Setoudeh, N., Welham, N.J. (2006). “Formation of zirconium diboride (ZrB2) by room temperature mechanochemical reaction between ZrO2, B2O3 and Mg.” Journal of Alloys and Compounds, Vol. 420, pp. 225-228.
  • Şimşek, T. (2014). Investigation of The Zirconium Diboride Nanocrystal Coated Different Materials Mechanic and Mechinability Properties. Ph. D. Thesis, University of Gazi, Ankara, Turkey.
  • Simsek, T., Baris, M., Chattoopahyay, A. K., Ozcan, S., Akkurt, A. (2017). Surface Treatment of S355JR Carbon Steel Surfaces with ZrB2 Nanocrystals by CO2 Laser.” Transactions of the Indian Institute of Metals, Vol. 71, pp. 1885-1896.
  • Simsek, T., Baris, M., Kalkan, B. (2017). “Mechanochemical processing and microstructural characterization of pure Fe2B nanocrystals.” Advanced Powder Technology, Vol. 28 (11), pp. 3056-3062.
  • Tlili, B., Barkaoui, A., Walock, M. (2016). “Tribology and wear resistance of the stainless steel. The sol–gel coating impact on the friction and damage.” Tribology International, Vol. 102, pp. 348-354.
  • Uthayakumar, M., Khan, M.A., Kumaran, S.T., Slota, A., Zajac, J. (2016). “Machinability of Nickel-Based Super alloy by Abrasive Water Jet Machining.” Materials and Manufacturing Processes, Vol. 31 (13), pp. 1733-1739.
  • Wang, X.H., Pan, X.N., Du, B.S., Li, S. (2013). “Production of in situ TiB2+TiC/Fe composite coating from precursor containing B4C-TiO2-Al powders by laser cladding.” Transactions of Nonferrous MetalsSociety of China, Vol. 23, pp. 1689-1693.
  • Xu, J., Zou, B., Fan, X., Zhao, S., Hui, Y., Wang, Y., Zhou, X., Cai, X., Tao, S., Ma, H., Cao, X. (2014). “Reactive plasma spraying synthesis and characterization of TiB2–TiC–Al2O3/Al composite coatings on a magnesium alloy.” Journal of Alloys and Compounds, Vol. 596, pp. 10–18
  • Xue, C., Zhou, H., Hu, J., Wang, H., Xu, J., Dong, S. (2018) “Fabrication and microstructure of ZrB2–ZrC–SiC coatings on C/C composites by reactive melt infiltration using ZrSi2 alloy.” Journal of Advanced Ceramics, Vol. (7), pp. 64-71.
  • Yilbas, B.S., Karatas, C., Karakoc, H., AbdulAleem, B.J., Khan, S., Al-Aqeeli N. (2015). “Laser surface treatment of aluminum based composit mixed with B4C particles.” Optics and Laser Technology, Vol. 66, pp. 129–137.
  • Yilbas, B.S., Akhtar, S.S., Karatas, C. (2011). “Laser carbonitriding of alumina surface.” Optics and Lasers in Engineering, Vol. 49, pp. 341–350.
  • Yilbas, B.S., Al-Aqeeli N, Karatas, C. (2012). “Laser control melting of alümina surfaces with presence of B4C particles.” Journal of Alloys and Compounds, Vol. 539, pp. 12-16.
  • Zhang, M., Araez, N.G. (2017). “A sol–gel route to titanium nitride conductive coatings on battery materials and performance of TiN-coated LiFePO4.” Journal of Materials Chemistry A, Vol. 5, pp. 2251-2260.
  • Zhang, Y., Wang, H., Li, T., Fu, Y., Ren, J. (2018). “Ultra-high temperature ceramic coating for carbon/carbon composites against ablation above 2000K.” Ceramic International, Vol. 44, pp. 3056-3063.
  • Zhao, X., Zhang, P., Wang, X., Chen, Y., Liu, H., Chen, L., Sheng, Y., Li, W. 2018). “In-situ formation of textured TiN coatings on biomedical titanium alloy by laser irradiation.” Journal of the Mechanical Behavior of Biomedical Materials, Vol. 78, pp. 143-153
  • Zou, J., Rubio, V., Binner, J. (2017). “Thermo ablative resistance of ZrB2-SiC-WC ceramics at 2400 oC.” Acta Materialia, Vol. 133, pp. 293-302.

INVESTIGATION OF MACHINABILITY PROPERTIES OF LASER TREATED S355JR CARBON STEEL WITH ZRB2 NANOPARTICLES

Yıl 2019, Cilt: 3 Sayı: 2, 51 - 59, 01.04.2019

Öz

In this study, the machinability properties of laser treated S355JR samples were investigated. The ZrB2 nanoparticles were coated on the surface of S355JR carbon steel by 2 kW CO2 laser. Then the coated samples were cut using the methods of abrasive water jet, wire-cut electrical discharge machining, laser, and abrasive disc, respectively. The phase structures and morphologies of the coated and cut surfaces were determined by using X-Ray diffractometry, optical microscope and scanning electron microscopy. The hardness was specified by using the microhardness device. It was found that low heat input and minimal damage was observed with the abrasive disc cutting method. Cutting with wire-cut electrical discharge machining, the worn zone was in a very narrow range, but there was also some heat-affected zone. While no heat input was seen in the method of cutting with abrasive water jet, significant damages in the shear edges and peripheral zones were observed due to abrasive particles. Intensive thermal deformation was also observed in the method of laser cutting. 

Kaynakça

  • Akgün, B., Çamurlu, H.E., Topkaya, Y., Sevinç, N. (2011). “Mechanochemical and volume combustion sythesis of ZrB2.” International Journal of Refractory Metals and Hard Materials, Vol. 29, pp. 601-607
  • Aouici, H., Bouchelaghem, H. Yallese, M. A., Elbah, M., Fnides, B. (2014) “ Machinability investigation in hard turning of AISI D3 cold work steel with ceramic tool using response surface methodology.” InternationalJournal of Advanced Manufacturing Technology, Vol.73, pp. 1775–1788.
  • Avar, B., Ozcan, Ş. (2015). “Characterization and amorphous phase formation of mechanically alloyed Co60Fe5Ni5Ti25B5 powders.” Journal of Alloys and Compounds Vol. 650, pp. 53-58.
  • Baudis, U., Fitchte, R. (1985). Boric oxide and boric acid and borates, Schwetz, KA, Lipp A, Capbll FT, Pfefferkom R(Eds.). Boron carbide, boron nitride, and metal borides, Zirconium and zirconium compounds, Ullmann's Encyclopedia of Industrial Chemistry, Fifth, Completely Revised Edition A4, Wiley-VCH, Weinheim, 263-307, 91.
  • Berger, L.M. (2015). “Application of hardmetals as thermal spray coatings.” International Journal of Refractory Metals and Hard Materials, Vol. 49, pp. 350–364.
  • Buldum, B.B., Şık, A., Ozkul, I. (2012). “Investigation of Magnesium Alloys Machinability.” International Journal Of Electronics; Mechanical And Mechatronics Engineering, Vol.2, pp. 261-268.
  • Bouzakis, K.D., Charalampous, P., Kotsanis, T., Skordaris, G., Bouzakis, E., Denkena, B., Breidenstein, B., Aurich, J.C., Zimmermann, M., Herrmann, T., M’saoubi R. (2017). “Effect of HM substrates’ cutting edge roundness manufactured by laser machining and micro-blasting on the coated tools’ cutting performance.” CIRP Journal of Manufacturing Science and Technology, Vol. 18, pp. 188–197.
  • Cheng, E. J., Li., J., Sakamoto, Y.., Han, S., Sun, H., Noble, J., Katsui, H., Goto, T. (2017). “Mechanical properties of individual phases of ZrB2-ZrC eutectic composite measured by nano indentation.” Journal of the European Ceramic Society, Vol. 37, pp. 4223-4227.
  • Chi, Y., Gu, G., Yu, H., Chen, C. (2018). “Laser surface alloying on aluminum and its alloys: A review.” Optics and Lasers in Engineering, Vol. 100, pp. 2337.
  • Dangio, A., Zoua, J., Binner, J., Ma, H.B., Hilmas, G.E., Fahrenholtz, W.G. (2018). “Mechanical properties and grain orientation evolution of zirconium diboridezirconium carbide ceramics.” Journal of the European Ceramic Society, Vol. 38, pp. 391-402.
  • Dai, X., Yan, D., Yang, Y., Chu, Z., Chen, X., Song, J. (2017). “In situ (Al,Cr)2O3-Cr composite coatingfabricated by reactive plasma Spraying.” Ceramic International, Vol. 43, pp. 6340-6344.
  • Fahrenholtz, W.G., Hilmas, G.E. (2007). “Refractory Diborides of Zirconium and Hafnium”, Journal of American Ceramic Society, Vol. 90(5), pp. 1347-1364.
  • Hascalik, A., Caydas¸ A. (2004). “Experimental study of wire electrical discharge machining of AISI D5 tool steel.” Journal of Materials Processing Technology, Vol. 148, pp. 362–367.
  • Hashemi, S.H., Shoja-Razavi, R. (2016). “Laser surface heat treatment of electroless Ni–P–SiC coating on Al356 alloy.” Optics and Laser Technology, Vol. 85, pp. 1–6.
  • Han, Y.G., Yang, Y., Wang, L., Chen, X.G., Chu, Z.H., Zhang, X.N., Dong, Y.C., Liu, Z., Yan, D.R. Zhang, J.X., Li, C.G. (2018). “Microstructure and properties of in-situ TiB2 matrix composite coatings prepared by plasma spraying.” Applied Surface Science, Vol. 431, pp. 48-54.
  • Hajdarevic, D. B., Cekic, A., Mehmedovic, M., Djelmica, A. (2015). “Experimental Study on Surface Roughness in Abrasive Water Jet Cutting.” Procedia Engineering Vol. 100, pp. 394 – 399.
  • Jalaly, M,, Bafghi, M.Sh., Tamizifar, M., Gotor, F.J. (2013). “Mechanosynthesis of nanocrystalline ZrB2- based powders by mechanically induced self-sustaining reaction method.” Advanced in Applied Ceramics, Vol. 112 (7), pp. 383-388.
  • Guo, W.M., Zhang, G.J. (2009). “Reaction Processes and Characterization of ZrB2 Powder Prepared by Boro/Carbothermal Reduction of ZrO2 in Vacuum.” Journal of the American Ceramic Society, Vol. 92, pp. 264–267.
  • Kumar, A., Singh, H., Kumar, V. (2017). “Study the parametric effect of abrasive water jet machining on surface roughness of Inconel 718 using RSM-BBD techniques.” Materials and Manufacturing Processes, pp. 1-7.
  • Liu, C., Liu, Z., Wang, B. (2018). “Modification of surface morphology to enhance tribological properties for CVD coated cutting tools through wet micro-blasting post-process.” Ceramic International, Vol. 44, pp. 3430-3439.
  • Lu, C., Yao, J.W., Wang, Y.X., Zhu, Y.D., Guo, J.H., Wang, Y., Fu, H.Y., Chen, Z.B., Yan, M.F. (2018) “A novel anti-frictional multiphase layer produced by plasma nitriding of PVD titanium coated ZL205A aluminum alloy.” Applied Surface Science, Vol. 431, pp. 32-38.
  • Masanta, M., Ganesh. P., Kaul, R., Choudhury, A.R. (2010). “Microstructure and mechanical properties of TiB2–TiC–Al2O3-SiC composite coatings developed by combined SHS, sol–gel and laser technology.” Surface and Coatings Technology, Vol. 204, pp. 3471–3480.
  • Neuman, E.W., Hilmas, G.E., Fahrenholtz, W.G. (2017). “Processing, microstructure, and mechanical properties of zirconium diboride-boron carbide ceramics.” Ceramic International, Vol. 43, pp. 6942-6948.
  • Ozkul, I., Buldum, B.B., Akkurt, A. (2013). “Machinabilty of Sleipner Cold Work Steel With Wire Electro Discharge Machining”. International Journal Of Electronics; Mechanical And Mechatronics Engineering, Vol.2, pp. 252-260
  • Pulsford, J., Kamnis, S., Murray, J., Bai1, M., Hussain, T. (2018). “Effect of Particle and Carbide Grain Sizes on a HVOAF WC-Co-Cr Coating for the Future Application on Internal Surfaces: Microstructure and Wear.” Journal of Thermal Spray Technology, Vol. 27, pp. 207–219.
  • Pei, Y.T., Ouyang, J.H, Lei, T.C. (1996). “Laser cladding of ZrO2-(Ni alloy) composite coating.” Surface and Coatings Technology, Vol. 81, pp. 131-135.
  • Peters, J.S., Cook, B.A., Harringa, I., Russell, A.M. (2009). “Erosion resistance of TiB2-ZrB2 composites.” Wear, Vol. 267, pp. 136-143.
  • Pourasad, J., Ehsani, N. (2017). “In-situ synthesis of SiCZrB2 coating by a novel pack cementation technique to protect graphite against oxidation.” Journal of Alloys and Compounds, Vol. 690, pp. 692-698.
  • Puri, A.B., Bhattacharyya, B. (2005). “Modeling and analysis of white layer depth in a wire-cut EDM process through response surface methodology.” International Journal of Advanced Manufacturing Technology, Vol.25, pp. 301–307.
  • Ruppi, S. (2005). “Deposition, microstructure and properties of texture-controlled CVD a-Al2O3 coatings.” International Journal of Refractory Metals and Hard Materials, Vol. 23, pp. 306–316.
  • Siebert, R., Schneider, J., Beyer, E. (2014). “Laser Cutting and Mechanical Cutting of Electrical Steels and its Effect on the Magnetic Properties.” Ieee Transactions On Magnetics, Vol. 50 (4), 2001904-2001908.
  • Suresh, S., Rangarajana, S., Bera, S., Krishnan, R., Amirthapandian, S., Sivakumar, M., Velmurugan, S. (2018). “Evaluation of corrosion resistance of nano nickel ferrite and magnetite double layer coatings on carbon steel.” Thin Solid Films, Vol. 645, pp. 77-86.
  • Sun, C., Xue, Q., Zhang, J., Wan, S., Tieu, A.K., Tran, B.H. (2018). “Growth behavior and mechanical properties of Cr-V composite surface layer on AISI D3 steel by thermal reactive deposition.” Vacuum, Vol. 148 pp. 158-167
  • Sonber, J.K., Suri, A.K. (2011). “Synthesis and Consolidation of Zirconium Diboride: Review.” Advances in Applied Ceramics, Vol. 110 (6), pp. 321-334.
  • Setoudeh, N., Welham, N.J. (2006). “Formation of zirconium diboride (ZrB2) by room temperature mechanochemical reaction between ZrO2, B2O3 and Mg.” Journal of Alloys and Compounds, Vol. 420, pp. 225-228.
  • Şimşek, T. (2014). Investigation of The Zirconium Diboride Nanocrystal Coated Different Materials Mechanic and Mechinability Properties. Ph. D. Thesis, University of Gazi, Ankara, Turkey.
  • Simsek, T., Baris, M., Chattoopahyay, A. K., Ozcan, S., Akkurt, A. (2017). Surface Treatment of S355JR Carbon Steel Surfaces with ZrB2 Nanocrystals by CO2 Laser.” Transactions of the Indian Institute of Metals, Vol. 71, pp. 1885-1896.
  • Simsek, T., Baris, M., Kalkan, B. (2017). “Mechanochemical processing and microstructural characterization of pure Fe2B nanocrystals.” Advanced Powder Technology, Vol. 28 (11), pp. 3056-3062.
  • Tlili, B., Barkaoui, A., Walock, M. (2016). “Tribology and wear resistance of the stainless steel. The sol–gel coating impact on the friction and damage.” Tribology International, Vol. 102, pp. 348-354.
  • Uthayakumar, M., Khan, M.A., Kumaran, S.T., Slota, A., Zajac, J. (2016). “Machinability of Nickel-Based Super alloy by Abrasive Water Jet Machining.” Materials and Manufacturing Processes, Vol. 31 (13), pp. 1733-1739.
  • Wang, X.H., Pan, X.N., Du, B.S., Li, S. (2013). “Production of in situ TiB2+TiC/Fe composite coating from precursor containing B4C-TiO2-Al powders by laser cladding.” Transactions of Nonferrous MetalsSociety of China, Vol. 23, pp. 1689-1693.
  • Xu, J., Zou, B., Fan, X., Zhao, S., Hui, Y., Wang, Y., Zhou, X., Cai, X., Tao, S., Ma, H., Cao, X. (2014). “Reactive plasma spraying synthesis and characterization of TiB2–TiC–Al2O3/Al composite coatings on a magnesium alloy.” Journal of Alloys and Compounds, Vol. 596, pp. 10–18
  • Xue, C., Zhou, H., Hu, J., Wang, H., Xu, J., Dong, S. (2018) “Fabrication and microstructure of ZrB2–ZrC–SiC coatings on C/C composites by reactive melt infiltration using ZrSi2 alloy.” Journal of Advanced Ceramics, Vol. (7), pp. 64-71.
  • Yilbas, B.S., Karatas, C., Karakoc, H., AbdulAleem, B.J., Khan, S., Al-Aqeeli N. (2015). “Laser surface treatment of aluminum based composit mixed with B4C particles.” Optics and Laser Technology, Vol. 66, pp. 129–137.
  • Yilbas, B.S., Akhtar, S.S., Karatas, C. (2011). “Laser carbonitriding of alumina surface.” Optics and Lasers in Engineering, Vol. 49, pp. 341–350.
  • Yilbas, B.S., Al-Aqeeli N, Karatas, C. (2012). “Laser control melting of alümina surfaces with presence of B4C particles.” Journal of Alloys and Compounds, Vol. 539, pp. 12-16.
  • Zhang, M., Araez, N.G. (2017). “A sol–gel route to titanium nitride conductive coatings on battery materials and performance of TiN-coated LiFePO4.” Journal of Materials Chemistry A, Vol. 5, pp. 2251-2260.
  • Zhang, Y., Wang, H., Li, T., Fu, Y., Ren, J. (2018). “Ultra-high temperature ceramic coating for carbon/carbon composites against ablation above 2000K.” Ceramic International, Vol. 44, pp. 3056-3063.
  • Zhao, X., Zhang, P., Wang, X., Chen, Y., Liu, H., Chen, L., Sheng, Y., Li, W. 2018). “In-situ formation of textured TiN coatings on biomedical titanium alloy by laser irradiation.” Journal of the Mechanical Behavior of Biomedical Materials, Vol. 78, pp. 143-153
  • Zou, J., Rubio, V., Binner, J. (2017). “Thermo ablative resistance of ZrB2-SiC-WC ceramics at 2400 oC.” Acta Materialia, Vol. 133, pp. 293-302.
Toplam 50 adet kaynakça vardır.

Ayrıntılar

Birincil Dil İngilizce
Konular Mühendislik
Bölüm Articles
Yazarlar

Tuncay Şimşek 0000-0002-4683-0152

Mustafa Baris 0000-0002-2119-0697

Sadan Ozcan Bu kişi benim 0000-0001-7966-1845

Adnan Akkurt Bu kişi benim 0000-0002-0622-1352

Yayımlanma Tarihi 1 Nisan 2019
Yayımlandığı Sayı Yıl 2019 Cilt: 3 Sayı: 2

Kaynak Göster

APA Şimşek, T., Baris, M., Ozcan, S., Akkurt, A. (2019). INVESTIGATION OF MACHINABILITY PROPERTIES OF LASER TREATED S355JR CARBON STEEL WITH ZRB2 NANOPARTICLES. Turkish Journal of Engineering, 3(2), 51-59.
AMA Şimşek T, Baris M, Ozcan S, Akkurt A. INVESTIGATION OF MACHINABILITY PROPERTIES OF LASER TREATED S355JR CARBON STEEL WITH ZRB2 NANOPARTICLES. TUJE. Nisan 2019;3(2):51-59.
Chicago Şimşek, Tuncay, Mustafa Baris, Sadan Ozcan, ve Adnan Akkurt. “INVESTIGATION OF MACHINABILITY PROPERTIES OF LASER TREATED S355JR CARBON STEEL WITH ZRB2 NANOPARTICLES”. Turkish Journal of Engineering 3, sy. 2 (Nisan 2019): 51-59.
EndNote Şimşek T, Baris M, Ozcan S, Akkurt A (01 Nisan 2019) INVESTIGATION OF MACHINABILITY PROPERTIES OF LASER TREATED S355JR CARBON STEEL WITH ZRB2 NANOPARTICLES. Turkish Journal of Engineering 3 2 51–59.
IEEE T. Şimşek, M. Baris, S. Ozcan, ve A. Akkurt, “INVESTIGATION OF MACHINABILITY PROPERTIES OF LASER TREATED S355JR CARBON STEEL WITH ZRB2 NANOPARTICLES”, TUJE, c. 3, sy. 2, ss. 51–59, 2019.
ISNAD Şimşek, Tuncay vd. “INVESTIGATION OF MACHINABILITY PROPERTIES OF LASER TREATED S355JR CARBON STEEL WITH ZRB2 NANOPARTICLES”. Turkish Journal of Engineering 3/2 (Nisan 2019), 51-59.
JAMA Şimşek T, Baris M, Ozcan S, Akkurt A. INVESTIGATION OF MACHINABILITY PROPERTIES OF LASER TREATED S355JR CARBON STEEL WITH ZRB2 NANOPARTICLES. TUJE. 2019;3:51–59.
MLA Şimşek, Tuncay vd. “INVESTIGATION OF MACHINABILITY PROPERTIES OF LASER TREATED S355JR CARBON STEEL WITH ZRB2 NANOPARTICLES”. Turkish Journal of Engineering, c. 3, sy. 2, 2019, ss. 51-59.
Vancouver Şimşek T, Baris M, Ozcan S, Akkurt A. INVESTIGATION OF MACHINABILITY PROPERTIES OF LASER TREATED S355JR CARBON STEEL WITH ZRB2 NANOPARTICLES. TUJE. 2019;3(2):51-9.
Flag Counter