Emici Tüp İçine Bükümlü Bant Yerleştirilmiş Bir Parabolik Oluklu Güneş Kollektörünün Isıl Verimini Araştırmak İçin Modelleme ve Simülasyon

Year 2021, Volume: 5 Issue: 1, 65 - 88, 30.06.2021

Mohammed Farıs Abbas Abbas , İbrahim Koç , Ahmed F. Khudheyer Aljanabı

https://doi.org/10.53600/ajesa.925830

Abstract

Modeling and Simulation to Investigate the Thermal Efficiency of a Parabolic Solar Trough Collector with Absorber Tube Inserted Twisted Tape System

Abstract

Concentrated solar power is one of the renewable energy sources in the world that can be utilized from solar energy by combining
and concentrating it. In this numerical study, computer software was used to investigate the parabolic trough collector consists
of a mirror and tube made of copper covered with a vacuum glass. The twisted tape made of aluminum is placed inside the tube
to generate swirl flow and turbulence around the axial centerline of the absorber tube with the working fluid. Water was used as
a working fluid with turbulent flow, the Reynolds number varied for the range of 2000 to 9000. To describe the present study,
continuity, momentum, and energy equations were used. The angle of inclination of the twisted tape has been taken into account
in six different values: 25 °, 33 °, 45 °, 50 °, 55 °, and 60 °. A study occurred in the city of Istanbul in Turkey with 41° latitude and
28.97° longitude for a periodic time from 9:00 am to 3:00 pm, for four different selected months, September, October, November,
and December. Results illustrated increasing in outlet temperature and heat transfer enhancement for six twisted tape angles
compared with the plain tube. The best angle of inclination of the twisted tape was found to be 50 degrees.

Keywords

Concentrating solar power, Parabolic trough collector, Twisted tape, Heat transfer enhancement

References

• Ananthsornaraj, C., and K. S. Reddy. 2015. “Numerical Investigation of Solar Parabolic Trough Receiver under Non Uniform Solar Flux Distribution.” ISES Solar World Congress 2015, Conference Proceedings, no. November: 620–32. https://doi.org/10.18086/swc.2015.04.08.
• Bellos, Evangelos, and Christos Tzivanidis. 2018a. “Analytical Expression of Parabolic Trough Solar Collector Performance.” Designs 2 (1): 1–17. https://doi.org/10.3390/designs2010009.
• Bellos, Evangelos, and Christos Tzivanidis. 2018b. “Assessment of the Thermal Enhancement Methods in Parabolic Trough Collectors.” International Journal of Energy and Environmental Engineering 9 (1): 59–70. https://doi.org/10.1007/s40095-017-0255-3.
• Bhakta, Amit K., Nitesh K. Panday, and Shailendra N. Singh. 2018. “Performance Study of a Cylindrical Parabolic Concentrating Solar Water Heater with Nail Type Twisted Tape Inserts in the Copper Absorber Tube.” Energies 11 (1): 1–15. https://doi.org/10.3390/en11010204.
• CENGEL, YUNUS A. 2011. HEAT TRANSFER SECOND EDITION A Practical Approach. MacGraw-Hill. https://doi.org/10.1007/978-3-642-20279-7_5.
• Duffie, John A., William A. Beckman, S. B. Prasad, J. S. Saini, Krishna M. Singh, Sushant Thakur, N. S. Thakur, Rajendra Karwa, and V. Srivastava. 2013. Wiley: Solar Engineering of Thermal Processes, 4th Edition - John A. Duffie, William A. Beckman. Energy Sources, Part A: Recovery, Utilization and Environmental Effects. Vol. 2013. https://doi.org/10.1080/15567036.2020.1764672%0Ahttp://dx.doi.org/10.1016/j.solener.2008.11.011%0Ahttp://eu.wiley.com/WileyCDA/WileyTitle/productCd-0470873663.html.
• Eiamsa-ard, S., C. Thianpong, and P. Eiamsa-ard. 2010. “Turbulent Heat Transfer Enhancement by Counter/Co-Swirling Flow in a Tube Fitted with Twin Twisted Tapes.” Experimental Thermal and Fluid Science 34 (1): 53–62. https://doi.org/10.1016/j.expthermflusci.2009.09.002.
• Ghadirijafarbeigloo, Sh, A H Zamzamian, and M Yaghoubi. 2014. “3-D Numerical Simulation of Heat Transfer and Turbulent Flow in a Receiver Tube of Solar Parabolic Trough Concentrator with Louvered Twisted-Tape Inserts.” Energy Procedia 49: 373–80. https://doi.org/10.1016/j.egypro.2014.03.040.
• Gianluca Coccia Giovanni Di Nicola Alejandro Hidalgo. n.d. Parabolic Trough Collector Prototypes for Low-Temperature Process Heat. SpringerBriefs in Applied Sciences and Technology 2016.
• He, Wei, Davood Toghraie, Amin Lot, Farzad Pourfattah, and Arash Karimipour. 2020. “Effect of Twisted-Tape Inserts and Nanofluid on Flow Field and Heat Transfer Characteristics in a Tube” 110 (December 2019). https://doi.org/10.1016/j.icheatmasstransfer.2019.104440.
• Khoshvaght-Aliabadi, Morteza, and Amir Feizabadi. 2020. “Performance Intensification of Tubular Heat Exchangers Using Compound Twisted-Tape and Twisted-Tube.” Chemical Engineering and Processing - Process Intensification 148 (December 2019): 107799. https://doi.org/10.1016/j.cep.2019.107799.
• Mahmoud, Mahmoud Sh, Ali Sabri Abbas, and Ahmed F. Khudheyer. 2020. “Solar Parabolic Trough Collector Tube Heat Transfer Analysis with Internal Conical Pin Fins.” Journal of Green Engineering 10 (10): 7422–36.
• Padilla, Ricardo Vasquez. 2011. “Simplified Methodology for Designing Parabolic Trough Solar Power Plants.”
• Saravanan, A, J S Senthilkumaar, S Jaisankar, and J Ananth. 2019. “Influence of Helix Twisted Tape on Heat Transfer and Friction Factor in Forced Circulation V-Trough Solar Water Heater.” International Journal of Sustainable Energy 38 (2): 163–76. https://doi.org/10.1080/14786451.2018.1476352.
• Sharma, Kapil, and Lal Kundan. 2014. “Nanofluid Based Concentrating Parabolic Solar Collector.” International Journal of Research in Mechanical Engineering and Technology 4 (October): 146–52.
• Sivakumar, K, K Rajan, T Mohankumar, and P Naveenchnadran. 2020. “Analysis of Heat Transfer Characteristics with Triangular Cut Twisted Tape (TCTT) and Circular Cut Twisted Tape (CCTT) Inserts.” In Materials Today: Proceedings, 22:375–82. Elsevier Ltd. https://doi.org/10.1016/j.matpr.2019.07.212.
• Velazquez-lucho, K M, and M Robles. 2016. “Parabolic Trough Solar Collector for Low Enthalpy Processes : An Analysis of the efficiency Enhancement by Using Twisted Tape Inserts” 93: 125–41. https://doi.org/10.1016/j.renene.2016.02.046.
• Yaningsih, Indri, and Agung Tri Wijayanta. 2018. “Concentric Tube Heat Exchanger Installed by Twisted Tapes Using Various Wings with Alternate Axes Concentric Tube Heat Exchanger Installed by Twisted Tapes Using Various Wings with Alternate Axes” 030005 (January 2017). https://doi.org/10.1063/1.4968258.
• Zhang, Shaojie, Lin Lu, Chuanshuai Dong, Seung Hyun, Building Services, The Hong, Kong Polytechnic, Hung Hom, and Hong Kong. 2019. “Thermal Characteristics of Perforated Self-Rotating Twisted Tapes in a Double- Pipe