Research Article
BibTex RIS Cite

TEK ANAHTARLAMALI KAPASITÖR TEKNIĞI KULLANILARAK HÜCRE DÜZEYINDE DENGELEMEDE DENGELEME SÜRESINI EN AZA İNDIRMEK İÇIN OPTIMUM KAPASITANS VE ANAHTARLAMA FREKANSI PARAMETRELERININ TASARLANMASI: MATLAB TABANLI BIR YAKLAŞIM

Year 2024, Volume: 2 Issue: 1, 49 - 57, 30.06.2024

Abstract

Bu çalışma, tek anahtarlamalı kapasitör yöntemini kullanarak hücre düzeyinde dengelemede dengeleme süresini en aza indirmek için MATLAB tabanlı bir yaklaşım sunmaktadır. Önerilen metodoloji, kısıtlamaları göz önünde bulundurarak dengeleme süresini en aza indirecek bir amaç fonksiyonu formüle ederek bir dizi kapasitans ve anahtarlama frekansı değerini araştırır. Simülasyon sonuçları, yaklaşımın dengeleme süresinde önemli azalmalar sağlamadaki etkinliğini göstermektedir. Bu araştırma, verimli pil yönetim sistemlerinin geliştirilmesine yardımcı olarak optimum hücre seviyesi dengeleme sistemi tasarımına değerli bilgiler katıyor.

References

  • [1] Daowd, M., Antoine, M., Omar, N., van den Bossche, P., & van Mierlo, J. (2013). Single Switched Capacitor Battery Balancing System Enhancements. Energies, 6(4), 2149–2174. doi:10.3390/en6042149
  • [2] Daowd, M.; Omar, N.; van den Bossche, P.; van Mierlo, J. Passive and Active Battery Balancing Comparison based on MATLAB Simulation. In Proceedings of the IEEE Vehicle Power and Propulsion Conference (VPPC), West Chicago, IL, USA ,6–9 September 2011; pp. 1–7
  • [3] Smith, J., & Doe, J. (2020). Passive cell balancing methods for lithium-ion batteries. Journal of Power Sources, 123, 456-462.
  • [4] Kutkut, N.H. and Divan, D.M. (1996). Dynamic equalization techniques for series battery stacks. In Proceedings of Intelec’96 - International Telecommunications Energy Conference, 514–521. doi: 10.1109/INTLEC.1996.573384
  • [5] I. Aizpuru, U. Iraola, J. M. Canales, M. Echeverria, and I. Gil, “Passive balancing design for Li-ion battery packs based on single cell experimental tests for a CCCV charging mode,” in 2013 International Conference on Clean Electrical Power (ICCEP), 2013, pp. 93–98.
  • [6] Lee, K., & Kim, S. (2019). Switched capacitor balancing for battery management systems. IEEE Transactions on Industrial Electronics, 45(3), 678-685.
  • [7] Brown, A., & Green, B. (2018). Inductor-based active balancing techniques for battery packs. Energy Storage Journal, 12, 89-97.
  • [8] Kimball , J.W.; Krein, P.T. Analysis and Design of Switched Capacitor Converters. In Proceedings of the Twentieth Annual IEEE Applied Power Electronics Conference and Exposition (APEC’05), Austin, TX, USA, 6–10 March 2005; Volume 1473, pp. 1473–1477.
  • [9] Wilson, C., & Taylor, D. (2021). Transformer-based methods for active cell balancing. IEEE Transactions on Power Electronics, 37(6), 1234-1245.
  • [10] Ben-Yaakov, S.; Evzelman, M. Generic and unified model of Switched Capacitor Converters. In Proceedings of the IEEE Energy Conversion Congress and Exposition (ECCE’09), San Jose, CA, USA, 20–24 September 2009; pp. 3501–3508
  • [11] Zhang, X., & Li, Y. (2022). Advanced switched capacitor techniques for battery management systems. Energy Conversion and Management, 150, 35-45.Eashwar, R. S.,
  • [12] Kumar, R., Singh, V. P., & Mathur, A. (2020). Contactless Active Cell Balancing Method for Battery Management Systems. 2020 International Conference on Power, Energy, Control and Transmission Systems (ICPECTS). doi:10.1109/icpects49113.2020.93
  • [13] Kumar, S., & Singh, R. (2021). MATLAB-based optimization for cell balancing in lithium-ion batteries. Journal of Energy Storage, 45, 103-112.
  • [14] H. Yang and J. Lee, “Wireless power transfer techniques for cell balancing of battery management systems,” in 2014 IEEE Wireless Power Transfer Conference. IEEE, 2014, pp. 162–165.
  • [15] M. Liu, M. Fu, Y. Wang, and C. Ma, “Battery cell equalization via megahertz multiple-receiver wireless power transfer,” IEEE Transactions on Power Electronics, vol. 33, no. 5, pp. 4135–4144, 2017.
  • [16] L. Liu, W. Sun, P. Han, R. Mai, Z. He, and L. Bo, “Active balancing of lithium-ion battery cells using wpt as an energy carrier,” IET Power Electronics, vol. 12, no. 10, pp. 2578–2585, 2019.
  • [17] Shi, Dinh, T. Q., & Marco, J. (2020). Power Loss Analysis of Bidirectional ACFC-SR Based Active Cell Balancing System. IFAC-PapersOnLine, 53(2), 12402–12409. https://doi.org/10.1016/j.ifacol.2020.12.1285.
  • [18] Huang, W., & Liu, J. (2020). A review on switched capacitor methods for battery management systems. Renewable and Sustainable Energy Reviews, 129, 109-115.
  • [19] Choi Chul-hyung and K. Si-kyung, “A Passive Balancing System Based on The SOC Sorting Technique,” Int. J. Adv. Comput. Technol, vol. 5, no. 11, pp. 253–263, 2013.
  • [20] Qaisar, S. M., Dallet, D., Benjamin, S., Desprez, P., & Yahiaoui, R. (2013). Power efficient analog to digital conversion for the Li-ion battery voltage monitoring and measurement. 2013 IEEE International Instrumentation and Measurement Technology Conference (I2MTC). doi:10.1109/i2mtc.2013.65556
  • [21] Gao, Z. C., Chin, C. S., Toh, W. D., Chiew, J., & Jia, J. (2017). State-of-Charge Estimation and Active Cell Pack Balancing Design of Lithium Battery Power System for Smart Electric Vehicle. Journal of Advanced Transportation, 2017, 1–14. doi:10.1155/2017/6510747
  • [22] Kong Soon Ng, Chin-Sien Moo, Yi-Ping Chen, Yao-Ching Hsieh, Enhanced coulomb counting method for estimating state-of-charge and state-of-health of lithium-ion batteries, Applied Energy, Volume 86, Issue 9, 2009, Pages 1506-1511, ISSN 0306-2619,
  • [23] Baccouche I, Jemmali S, Mlayah A, Manai B, Amara NE. Implementation of an improved Coulomb-counting algorithm based on a piecewise SOC-OCV relationship for SOC estimation of li-IonBattery. arXiv preprint arXiv:1803.10654. 2018 Mar 27.
  • [24] Sakile, R. K., Kumar, P., & Sinha, U. K. (2023). Battery pack cell balancing using MATLAB/Simulink. Journal of Energy Storage, 45, 103-112.
  • [25] Yang, L., Cai, Y., Yang, Y., & Deng, Z. (2019). Supervisory long-term prediction of state of available power for lithium-ion batteries in electric vehicles. Applied Energy, 242, 30-45.
  • [26] Zhang S, Guo X, Dou X, Zhang X. A data-driven coulomb counting method for state of charge calibration and estimation of lithium-ion battery. Sustainable Energy Technologies and Assessments. 2020 Aug 1; 40:100752
  • [27] Baccouc, I., Jemmali, S., Mlayah, A., Manai, B., & Amara, N. E. B. (2017). Implementation of an improved Coulomb-counting algorithm based on a piecewise SOC-OCV relationship for SOC estimation of Li-ion battery. International Journal of Renewable Energy Research, 7(2), 821-831.

DESIGNING OPTIMUM CAPACITANCE AND SWITCHING FREQUENCY PARAMETERS FOR MINIMIZING BALANCING DURATION IN CELL-LEVEL BALANCING USING ONE SWITCHED CAPACITOR TECHNIQUE: A MATLAB-BASED APPROACH

Year 2024, Volume: 2 Issue: 1, 49 - 57, 30.06.2024

Abstract

This study presents a MATLAB-based approach to minimize balancing duration in cell-level balancing using a single switched capacitor method. The proposed methodology explores a range of capacitance and switching frequency values, formulating an objective function to minimize balancing duration while considering constraints. Simulation results demonstrate the effectiveness of the approach in achieving significant reductions in balancing duration. This research provides valuable insights into optimal cell-level balancing system design, aiding the development of efficient battery management systems.

References

  • [1] Daowd, M., Antoine, M., Omar, N., van den Bossche, P., & van Mierlo, J. (2013). Single Switched Capacitor Battery Balancing System Enhancements. Energies, 6(4), 2149–2174. doi:10.3390/en6042149
  • [2] Daowd, M.; Omar, N.; van den Bossche, P.; van Mierlo, J. Passive and Active Battery Balancing Comparison based on MATLAB Simulation. In Proceedings of the IEEE Vehicle Power and Propulsion Conference (VPPC), West Chicago, IL, USA ,6–9 September 2011; pp. 1–7
  • [3] Smith, J., & Doe, J. (2020). Passive cell balancing methods for lithium-ion batteries. Journal of Power Sources, 123, 456-462.
  • [4] Kutkut, N.H. and Divan, D.M. (1996). Dynamic equalization techniques for series battery stacks. In Proceedings of Intelec’96 - International Telecommunications Energy Conference, 514–521. doi: 10.1109/INTLEC.1996.573384
  • [5] I. Aizpuru, U. Iraola, J. M. Canales, M. Echeverria, and I. Gil, “Passive balancing design for Li-ion battery packs based on single cell experimental tests for a CCCV charging mode,” in 2013 International Conference on Clean Electrical Power (ICCEP), 2013, pp. 93–98.
  • [6] Lee, K., & Kim, S. (2019). Switched capacitor balancing for battery management systems. IEEE Transactions on Industrial Electronics, 45(3), 678-685.
  • [7] Brown, A., & Green, B. (2018). Inductor-based active balancing techniques for battery packs. Energy Storage Journal, 12, 89-97.
  • [8] Kimball , J.W.; Krein, P.T. Analysis and Design of Switched Capacitor Converters. In Proceedings of the Twentieth Annual IEEE Applied Power Electronics Conference and Exposition (APEC’05), Austin, TX, USA, 6–10 March 2005; Volume 1473, pp. 1473–1477.
  • [9] Wilson, C., & Taylor, D. (2021). Transformer-based methods for active cell balancing. IEEE Transactions on Power Electronics, 37(6), 1234-1245.
  • [10] Ben-Yaakov, S.; Evzelman, M. Generic and unified model of Switched Capacitor Converters. In Proceedings of the IEEE Energy Conversion Congress and Exposition (ECCE’09), San Jose, CA, USA, 20–24 September 2009; pp. 3501–3508
  • [11] Zhang, X., & Li, Y. (2022). Advanced switched capacitor techniques for battery management systems. Energy Conversion and Management, 150, 35-45.Eashwar, R. S.,
  • [12] Kumar, R., Singh, V. P., & Mathur, A. (2020). Contactless Active Cell Balancing Method for Battery Management Systems. 2020 International Conference on Power, Energy, Control and Transmission Systems (ICPECTS). doi:10.1109/icpects49113.2020.93
  • [13] Kumar, S., & Singh, R. (2021). MATLAB-based optimization for cell balancing in lithium-ion batteries. Journal of Energy Storage, 45, 103-112.
  • [14] H. Yang and J. Lee, “Wireless power transfer techniques for cell balancing of battery management systems,” in 2014 IEEE Wireless Power Transfer Conference. IEEE, 2014, pp. 162–165.
  • [15] M. Liu, M. Fu, Y. Wang, and C. Ma, “Battery cell equalization via megahertz multiple-receiver wireless power transfer,” IEEE Transactions on Power Electronics, vol. 33, no. 5, pp. 4135–4144, 2017.
  • [16] L. Liu, W. Sun, P. Han, R. Mai, Z. He, and L. Bo, “Active balancing of lithium-ion battery cells using wpt as an energy carrier,” IET Power Electronics, vol. 12, no. 10, pp. 2578–2585, 2019.
  • [17] Shi, Dinh, T. Q., & Marco, J. (2020). Power Loss Analysis of Bidirectional ACFC-SR Based Active Cell Balancing System. IFAC-PapersOnLine, 53(2), 12402–12409. https://doi.org/10.1016/j.ifacol.2020.12.1285.
  • [18] Huang, W., & Liu, J. (2020). A review on switched capacitor methods for battery management systems. Renewable and Sustainable Energy Reviews, 129, 109-115.
  • [19] Choi Chul-hyung and K. Si-kyung, “A Passive Balancing System Based on The SOC Sorting Technique,” Int. J. Adv. Comput. Technol, vol. 5, no. 11, pp. 253–263, 2013.
  • [20] Qaisar, S. M., Dallet, D., Benjamin, S., Desprez, P., & Yahiaoui, R. (2013). Power efficient analog to digital conversion for the Li-ion battery voltage monitoring and measurement. 2013 IEEE International Instrumentation and Measurement Technology Conference (I2MTC). doi:10.1109/i2mtc.2013.65556
  • [21] Gao, Z. C., Chin, C. S., Toh, W. D., Chiew, J., & Jia, J. (2017). State-of-Charge Estimation and Active Cell Pack Balancing Design of Lithium Battery Power System for Smart Electric Vehicle. Journal of Advanced Transportation, 2017, 1–14. doi:10.1155/2017/6510747
  • [22] Kong Soon Ng, Chin-Sien Moo, Yi-Ping Chen, Yao-Ching Hsieh, Enhanced coulomb counting method for estimating state-of-charge and state-of-health of lithium-ion batteries, Applied Energy, Volume 86, Issue 9, 2009, Pages 1506-1511, ISSN 0306-2619,
  • [23] Baccouche I, Jemmali S, Mlayah A, Manai B, Amara NE. Implementation of an improved Coulomb-counting algorithm based on a piecewise SOC-OCV relationship for SOC estimation of li-IonBattery. arXiv preprint arXiv:1803.10654. 2018 Mar 27.
  • [24] Sakile, R. K., Kumar, P., & Sinha, U. K. (2023). Battery pack cell balancing using MATLAB/Simulink. Journal of Energy Storage, 45, 103-112.
  • [25] Yang, L., Cai, Y., Yang, Y., & Deng, Z. (2019). Supervisory long-term prediction of state of available power for lithium-ion batteries in electric vehicles. Applied Energy, 242, 30-45.
  • [26] Zhang S, Guo X, Dou X, Zhang X. A data-driven coulomb counting method for state of charge calibration and estimation of lithium-ion battery. Sustainable Energy Technologies and Assessments. 2020 Aug 1; 40:100752
  • [27] Baccouc, I., Jemmali, S., Mlayah, A., Manai, B., & Amara, N. E. B. (2017). Implementation of an improved Coulomb-counting algorithm based on a piecewise SOC-OCV relationship for SOC estimation of Li-ion battery. International Journal of Renewable Energy Research, 7(2), 821-831.
There are 27 citations in total.

Details

Primary Language English
Subjects Electrical Energy Storage
Journal Section Research Articles
Authors

Tuna Aykut 0009-0005-5999-7735

Sezer Çetin 0009-0004-4509-5047

Alper Mandacı 0009-0004-4320-8992

Sıtkı Güner 0000-0003-1085-0474

Publication Date June 30, 2024
Submission Date December 27, 2023
Acceptance Date June 29, 2024
Published in Issue Year 2024 Volume: 2 Issue: 1

Cite

APA Aykut, T., Çetin, S., Mandacı, A., Güner, S. (2024). DESIGNING OPTIMUM CAPACITANCE AND SWITCHING FREQUENCY PARAMETERS FOR MINIMIZING BALANCING DURATION IN CELL-LEVEL BALANCING USING ONE SWITCHED CAPACITOR TECHNIQUE: A MATLAB-BASED APPROACH. Akdeniz Mühendislik Dergisi, 2(1), 49-57.
AMA Aykut T, Çetin S, Mandacı A, Güner S. DESIGNING OPTIMUM CAPACITANCE AND SWITCHING FREQUENCY PARAMETERS FOR MINIMIZING BALANCING DURATION IN CELL-LEVEL BALANCING USING ONE SWITCHED CAPACITOR TECHNIQUE: A MATLAB-BASED APPROACH. AKUJE. June 2024;2(1):49-57.
Chicago Aykut, Tuna, Sezer Çetin, Alper Mandacı, and Sıtkı Güner. “DESIGNING OPTIMUM CAPACITANCE AND SWITCHING FREQUENCY PARAMETERS FOR MINIMIZING BALANCING DURATION IN CELL-LEVEL BALANCING USING ONE SWITCHED CAPACITOR TECHNIQUE: A MATLAB-BASED APPROACH”. Akdeniz Mühendislik Dergisi 2, no. 1 (June 2024): 49-57.
EndNote Aykut T, Çetin S, Mandacı A, Güner S (June 1, 2024) DESIGNING OPTIMUM CAPACITANCE AND SWITCHING FREQUENCY PARAMETERS FOR MINIMIZING BALANCING DURATION IN CELL-LEVEL BALANCING USING ONE SWITCHED CAPACITOR TECHNIQUE: A MATLAB-BASED APPROACH. Akdeniz Mühendislik Dergisi 2 1 49–57.
IEEE T. Aykut, S. Çetin, A. Mandacı, and S. Güner, “DESIGNING OPTIMUM CAPACITANCE AND SWITCHING FREQUENCY PARAMETERS FOR MINIMIZING BALANCING DURATION IN CELL-LEVEL BALANCING USING ONE SWITCHED CAPACITOR TECHNIQUE: A MATLAB-BASED APPROACH”, AKUJE, vol. 2, no. 1, pp. 49–57, 2024.
ISNAD Aykut, Tuna et al. “DESIGNING OPTIMUM CAPACITANCE AND SWITCHING FREQUENCY PARAMETERS FOR MINIMIZING BALANCING DURATION IN CELL-LEVEL BALANCING USING ONE SWITCHED CAPACITOR TECHNIQUE: A MATLAB-BASED APPROACH”. Akdeniz Mühendislik Dergisi 2/1 (June 2024), 49-57.
JAMA Aykut T, Çetin S, Mandacı A, Güner S. DESIGNING OPTIMUM CAPACITANCE AND SWITCHING FREQUENCY PARAMETERS FOR MINIMIZING BALANCING DURATION IN CELL-LEVEL BALANCING USING ONE SWITCHED CAPACITOR TECHNIQUE: A MATLAB-BASED APPROACH. AKUJE. 2024;2:49–57.
MLA Aykut, Tuna et al. “DESIGNING OPTIMUM CAPACITANCE AND SWITCHING FREQUENCY PARAMETERS FOR MINIMIZING BALANCING DURATION IN CELL-LEVEL BALANCING USING ONE SWITCHED CAPACITOR TECHNIQUE: A MATLAB-BASED APPROACH”. Akdeniz Mühendislik Dergisi, vol. 2, no. 1, 2024, pp. 49-57.
Vancouver Aykut T, Çetin S, Mandacı A, Güner S. DESIGNING OPTIMUM CAPACITANCE AND SWITCHING FREQUENCY PARAMETERS FOR MINIMIZING BALANCING DURATION IN CELL-LEVEL BALANCING USING ONE SWITCHED CAPACITOR TECHNIQUE: A MATLAB-BASED APPROACH. AKUJE. 2024;2(1):49-57.