EN
TR
Determination of optimum screwing torsional moment in the screw osteosynthesis (experimental study of the human cadaver bones)
Abstract
In this experimental study, we tried to determine the optimum torsional moment, by mounting an electro. nic torsional screw driver, which has a sensitivity of 0-2000 Nm, of specially designed screw and plate models for human cadaver bone diaphyses. During these applications measurements were performed using X-Y recorder and strainmeter and by human sense. Results of different trials with respect to applied force (Nm) were completely different from each other. On the other hand during the application of screws into the bones at the starting point of elasticity, after friction moment was defined, the screw driver was rotated up to 90° in clockwise direction and stopped. In all experiments this procedure was repeated. In graphics, the highest point of screwing moment relative to the elastic phase were defined as mentioned below; Upper third: 53.3%, middle third: 36.7%, lower third: 10.0%. As a conclusion, it's contended that, after squeezing had started we obtained optimum screwing torsional moment with the rotation of screw driver up to 90°.
Keywords
Details
Primary Language
English
Subjects
-
Journal Section
-
Publication Date
September 11, 2006
Submission Date
March 6, 2014
Acceptance Date
-
Published in Issue
Year 1991 Volume: 25 Number: 4
APA
Goksan, M., Sen, B., & Goksan, B. (2006). Determination of optimum screwing torsional moment in the screw osteosynthesis (experimental study of the human cadaver bones). Acta Orthopaedica et Traumatologica Turcica, 25(4), 229-233. https://doi.org/10.3944/aott.v25i4.1232
AMA
1.Goksan M, Sen B, Goksan B. Determination of optimum screwing torsional moment in the screw osteosynthesis (experimental study of the human cadaver bones). Acta Orthopaedica et Traumatologica Turcica. 2006;25(4):229-233. doi:10.3944/aott.v25i4.1232
Chicago
Goksan, M., Bener Sen, and Bora Goksan. 2006. “Determination of Optimum Screwing Torsional Moment in the Screw Osteosynthesis (experimental Study of the Human Cadaver Bones)”. Acta Orthopaedica et Traumatologica Turcica 25 (4): 229-33. https://doi.org/10.3944/aott.v25i4.1232.
EndNote
Goksan M, Sen B, Goksan B (September 1, 2006) Determination of optimum screwing torsional moment in the screw osteosynthesis (experimental study of the human cadaver bones). Acta Orthopaedica et Traumatologica Turcica 25 4 229–233.
IEEE
[1]M. Goksan, B. Sen, and B. Goksan, “Determination of optimum screwing torsional moment in the screw osteosynthesis (experimental study of the human cadaver bones)”, Acta Orthopaedica et Traumatologica Turcica, vol. 25, no. 4, pp. 229–233, Sept. 2006, doi: 10.3944/aott.v25i4.1232.
ISNAD
Goksan, M. - Sen, Bener - Goksan, Bora. “Determination of Optimum Screwing Torsional Moment in the Screw Osteosynthesis (experimental Study of the Human Cadaver Bones)”. Acta Orthopaedica et Traumatologica Turcica 25/4 (September 1, 2006): 229-233. https://doi.org/10.3944/aott.v25i4.1232.
JAMA
1.Goksan M, Sen B, Goksan B. Determination of optimum screwing torsional moment in the screw osteosynthesis (experimental study of the human cadaver bones). Acta Orthopaedica et Traumatologica Turcica. 2006;25:229–233.
MLA
Goksan, M., et al. “Determination of Optimum Screwing Torsional Moment in the Screw Osteosynthesis (experimental Study of the Human Cadaver Bones)”. Acta Orthopaedica et Traumatologica Turcica, vol. 25, no. 4, Sept. 2006, pp. 229-33, doi:10.3944/aott.v25i4.1232.
Vancouver
1.M. Goksan, Bener Sen, Bora Goksan. Determination of optimum screwing torsional moment in the screw osteosynthesis (experimental study of the human cadaver bones). Acta Orthopaedica et Traumatologica Turcica. 2006 Sep. 1;25(4):229-33. doi:10.3944/aott.v25i4.1232