Sep 25, 2024
Publication Type
Articles
Research Article
Aim
Academic Platform Journal of Engineering and Smart Systems(APJESS) is a peer reviewed open-access journal which focuses on the research and applications related to smart systems and artificial intelligence. APJESS accepts both original research papers and review articles written in English. It is essential that the information created in scientific study needs to be new, suggest new method or give a new dimension to an existing information. Articles submitted for publication are evaluated by at least two referees in case the editor finds potential scientific merit, and final acceptance and rejection decision are taken by editorial board. The authors are not informed about the name of referees who evaluate the papers. In similar way, the referees are not allowed to see the names of authors. The papers which do not satisfy the scientific level of the journal can be refused with unexplained reason.
There are two key principles that APJESS was founded on: Firstly, to publish the most exciting, novel, technically sound, and clearly presented researches with respect to the subjects of smart systems and artificial intelligence. Secondly, to provide a rapid turn-around time possible for reviewing and publishing, and to disseminate the articles freely for research, teaching and reference purposes.
Any information about a submitted manuscript cannot be disclosed by the editor and any other editorial staff to anyone other than the corresponding author, reviewers, potential reviewers, other editorial advisers, and the publisher. No confidential information or ideas obtained through peer review can be used for personal advantage.
DOI Prefix: 10.21541/
Journal History
The journal was published between 2013-2021 with the title of "Academic Platform - Journal of Engineering and Science". It will be published under its new title "Academic Platform Journal of Engineering and Smart Systems" after 2022.
Years: 2013-2021
Note: The editorial board of APJES decided to focus the scope of the journal to the topics related to smart systems and artificial intelligence. The manuscripts from all engineering and science disciplines which contain artificial intelligent techniques or smart system approach could be submitted to be evaluated for possible publication in APJES. However, the papers under evaluation by blind peer reviewers will continue to proceed evaluation process. On the other hand, the papers submitted but not taken into the evaluation process yet, will be asked to be withdrawn by the corresponding author or the editor will do that instead.
Scope
APJESS aims to publish research and review papers dealing with, but not limited to, the following research fields:
• Knowledge Representation and Reasoning,
• Data Mining & Data Science,
• Supervised, Semi-Supervised and Unsupervised Learning,
• Machine Learning (ML) and Neural Computing,
• Evolutionary Computation,
• Natural Language Processing, Internet of Things, Big Data
• Fuzzy Systems,
• Intelligent Information Processing,
• AI Powered Robotic Systems,
• Multi-agent Systems and Programming for Smart Systems
Article Types
Manuscripts submitted to APJESS should neither be published previously nor be under consideration for publication in another journal.
The main article types are as follows:
- ResearchArticles: Original research manuscripts. The journal considers all original research manuscripts provided that the work reports scientifically sound experiments and provides a substantial amount of new information.
- Review Articles: These provide concise and precise updates on the latest progress made in a given area of research.
Checklist for Submissions
Please,
• read the Aims & Scope to see if your manuscript is suitable for the journal,
• use the Microsoft Word template to prepare your manuscript;
• Download Copyright Transfer Form and signed by all authors.
• make sure that issues about Ethical Principles and Publication Policy, Copyright and Licensing, Archiving Policy, Repository Policy have been appropriately considered;
• Ensure that all authors have approved the content of the submitted manuscript.
The main text should be formed in the following order:
Manuscript: The article should start with an introduction written in scientific language, putting thoughts together from diverse disciplines combining evidence-based knowledge and logical arguments, conveying views about the aim and purpose of the article. It must address all readers in general. The technical terms, symbols, abbreviations must be defined at the first time when they are used in the article. The manuscript should be formed in the following order:
- Introduction,
- Material and Method,
- Findings,
- Discussion and Conclusion.
References: At the end of the paper provide full details of all references cited in-text. The reference list should be arranged in the order of appearance of the in-text citations, not in an alphabetical order, beginning with [1], and continuing in an ascending numerical order, from the lowest number to the highest. In the reference list, only one resource per reference number is acceptable.
References must be numbered in order of appearance in the text (including citations in tables and legends) and listed indi-vidually at the end of the manuscript. We recommend preparing the references with a bibliography software package, such as EndNote, Reference Manager or Zotero to avoid typing mistakes and duplicated references. Include the digital object identifier (DOI) for all references where available. Please use IEEE style.
IEEE Sample Reference List
[1] R. E. Ziemer and W. H. Tranter, Principles of Communications: Systems, Modulation, and Noise, 7th ed. Hoboken, NJ: Wiley, 2015.
[2] J. D. Bellamy et al., Computer Telephony Integration, New York: Wiley, 2010.
[3] C. Jacks, High Rupturing Capacity (HRC) Fuses, New York: Penguin Random House, 2013, pp. 175–225.
[4] N. B. Vargafik, J. A. Wiebelt, and J. F. Malloy, "Radiative transfer," in Convective Heat. Melbourne: Engineering Education Australia, 2011, ch. 9, pp. 379–398.
[5] H. C. Hottel and R. Siegel, "Film condensation," in Handbook of Heat Transfer, 2nd ed. W. C. McAdams, Ed. New York: McGraw-Hill, 2011, ch. 9, pp. 78–99.
[6] H. H. Gaynor, Leading and Managing Engineering and Technology, Book 2: Developing Managers and Leaders. IEEE-USA, 2011. Accessed on: Oct. 15, 2016. [Online]. Available: http://www.ieeeusa.org/communications/ebooks/files/sep14/n2n802/Leading-and-Managing-Engineering-and-Technology-Book-2.pdf
[7] G. H. Gaynor, "Dealing with the manager leader dichotomy," in Leading and Managing Engineering and Technology, Book 2, Developing Leaders and Mangers. IEEE-USA, 2011, pp. 27–28. Accessed on: Jan. 23, 2017. [Online]. Available: http://www.ieeeusa.org/communications/ebooks/files/sep14/n2n802/Leading-and-Managing-Engineering-and-Technology-Book-2.pdf
[8] M. Cvijetic, "Optical transport system engineering," in Wiley Encyclopedia of Telecommunications, vol. 4, J. G. Proakis, Ed. New York: John Wiley & Sons, 2003, pp. 1840–1849. Accessed on: Feb. 5, 2017. [Online]. Available: http://ebscohost.com
[9] T. Kaczorek, "Minimum energy control of fractional positive electrical circuits", Archives of Electrical Engineering, vol. 65, no. 2, pp.191–201, 2016.
[10] P. Harsha and M. Dahleh, "Optimal management and sizing of energy storage under dynamic pricing for the efficient integration of renewable energy", IEEE Trans. Power Sys., vol. 30, no. 3, pp. 1164–1181, May 2015.
[11] A. Vaskuri, H. Baumgartner, P. Kärhä, G. Andor, and E. Ikonen, "Modeling the spectral shape of InGaAlP-based red light-emitting diodes," Journal of Applied Physics, vol. 118, no. 20, pp. 203103-1–203103-7, Jul. 2015. Accessed on: Feb. 9, 2017. [Online]. Available: doi: 10.1063/1.4936322
[12] K. J. Krishnan, "Implementation of renewable energy to reduce carbon consumption and fuel cell as a back-up power for national broadband network (NBN) in Australia," Ph.D dissertation, College of Eng. and Sc., Victoria Univ., Melbourne, 2013.
[13] C. R. Ozansoy, "Design and implementation of a Universal Communications Processor for substation integration, automation and protection," Ph.D. dissertation, College of Eng. and Sc., Victoria Univ., Melbourne, 2006. [Online]. Accessed on: June 22, 2017. [Online]. Available: http://vuir.vu.edu.au/527/
[14] M. T. Long, "On the statistical correlation between the heave, pitch and roll motion of road transport vehicles," Research Master thesis, College of Eng. and Sc., Victoria Univ., Melb., Vic., 2016.
[15] Safe Working on or Near Low-voltage Electrical Installations and Equipment, AS/NZS 4836:2011, 2011.
Abstract: We strongly encourage authors to use the following style of structured abstracts, but without headings: (1) Background: Place the question addressed in a broad context and highlight the purpose of the study; (2) Methods: briefly describe the main methods or treatments applied; (3) Results: summarize the article’s main findings; (4) Conclusions: indicate the main conclusions or interpretations. The abstract should be an objective representation of the article and it must not contain results that are not presented and substantiated in the main text and should not exaggerate the main conclusions. A line space should be left to the key words that will consist of at least 3 and maximum 5 words. Mathematical expressions should not be included in essence. For research articles, abstracts should give a pertinent overview of the work.
All these sections should be numbered. The text can also have sub-headings and sub-titles (2.1, 2.2, ...etc.).
Peer Review Policy
Academic Platform Journal of Engineering and Smart Systems(APJESS), applies double blind peer-review process in which both the reviewer and the author are anonymous. Reviewer selection for each submitted article is up to area editors, and reviewers are selected based on the reviewer’s expertise, competence, and previous experience in reviewing papers for APJES.
Every submitted article is evaluated by area editor, at least, for an initial review. If the paper reaches minimum quality criteria, fulfills the aims, scope and policies of APJES, it is sent to at least two reviewers for evaluation.The reviewers evaluate the paper according to the Review guidelines set by editorial board members and return it to the area editor, who conveys the reviewers' anonymous comments back to the author. Anonymity is strictly maintained.
The double blind peer-review process is managed using “ULAKBİM Dergi Sistemleri”, namely Dergipark platform.
Originality and Plagiarism Policy
Authors by submitting their manuscript to APJESS declare that their work is original and authored by them; has not been previously published nor submitted for evaluation; original ideas, data, findings and materials taken from other sources (including their own) are properly documented and cited; their work does not violate any rights of others, including privacy rights and intellectual property rights; provided data is their own data, true and not manipulated. Plagiarism in whole or in part without proper citation is not tolerated by APJESS. Manuscripts submitted to the journal will be checked for originality using anti-plagiarism software.Journal Ethics and Malpractice Statement
For all parties involved in the publishing process (the author(s), the journal editor(s), the peer reviewers, the society, and the publisher) it is necessary to agree upon standards of expected ethical behavior. The ethics statements for APJESS are based on the Committee on Publication Ethics (COPE) Code of Conduct guidelines available at www.publicationethics.org.1. Editor Responsibilities
Publication Decisions & Accountability
The editor of APJESS is responsible for deciding which articles submitted to the journal should be published, and, moreover, is accountable for everything published in the journal. In making these decisions, the editor may be guided by the journal’s editorial board and/or area editors, and considers the policies of the journal. The editor should maintain the integrity of the academic record, preclude business needs from compromising intellectual and ethical standards, and always be willing to publish corrections, clarifications, retractions, and apologies when needed.Fair play
The editor should evaluate manuscripts for their intellectual content without regard to race, gender, sexual orientation, religious belief, ethnic origin, citizenship, or political philosophy of the author(s).Confidentiality
The editor and any editorial staff must not disclose any information about a submitted manuscript to anyone other than the corresponding author, reviewers, potential reviewers, other editorial advisers, and the publisher, as appropriate.Disclosure, conflicts of interest, and other issues
The editor will be guided by COPE’s Guidelines for Retracting Articles when considering retracting, issuing expressions of concern about, and issuing corrections pertaining to articles that have been published in APJES.Unpublished materials disclosed in a submitted manuscript must not be used in an editor’s own research without the explicit written consent of the author(s). Privileged information or ideas obtained through peer review must be kept confidential and not used for personal advantage.
The editor should seek so ensure a fair and appropriate peer-review process. The editor should recuse himself/herself from handling manuscripts (i.e. should ask a co-editor, associate editor, or other member of the editorial board instead to review and consider) in which they have conflicts of interest resulting from competitive, collaborative, or other relationships or connections with any of the authors, companies, or (possibly) institutions connected to the papers. The editor should require all contributors to disclose relevant competing interests and publish corrections if competing interests are revealed after publication. If needed, other appropriate action should be taken, such as the publication of a retraction or expression of concern.