Yeliz Yıldırım

doi:10.18038/btda.21961

Abstract

References

Xu K, Chen M, Zhang K, Hu J. Synthesis and characterization of novel epoxy resin bearing naphthyl and limonene moieties, and its cured polymer, Polymer, 45:1133-1140, 2004.
Zabihia O, Mostafavi SM, Ravari F, Khodabandeh A, Hooshafza A, Zare K, Shahizadeh M. The effect of zinc oxide nanoparticles on thermo-physical properties of diglycidyl ether of bisphenol A/2,2`-Diamino-1,1`-binaphthalene nanocomposites, Thermochimica acta, 521:49-58, 2011.
Liu Y, Liu W, Yu D. Thermal properties and flame retardancy of epoxy resins modified with polysiloxane containing epoxy groups and redistributed Poly(2,6-dimethyl-1,4-phenylene) chains, Iranian Polymer Journal, 18:445-452, 2009.
Gao JG, Zhang X, Huo Li. Curing kinetics and thermal properties of liquid crystalline p- PEPB/Bisphenol-A Epoxy/Diamine system, Iranian Polymer Journal, 19:731-742, 2010.
Hsiue GH, Wei HF, Shiao SJ, Kuo WJ, Sha YA. Chemical modification of dicyclopentadiene- based epoxy resins to improve compatibility and thermal properties, Polymer Degradation and Stability, 73:309-318, 2001.
Budrugeac P, Segal E. Application of isoconversional and multivariate non-linear regression methods for evaluation of the degradation mechanism and kinetic parameters of an epoxy resin, Polymer Degradation and Stability, 93:1073-1080, 2008.
Lin ST, Huang SK. Thermal degradation study of siloxane-DGEBA epoxy copolymers, European Polymer Journal, 33:365-373, 1997.
Ghaemy M, Rahpaima G, Behmadi H. Effect of triphenylphosphine on the cure reaction and thermal stability of diglycidyl ether of bisphenol A-based epoxy resin, Iranian Polymer Journal, 17:875-885, 2008.

Sivalingam G, Madras G. Thermal degradation of binary physical mixtures and copolymers of poly(-caprolactone), poly(D,L-lactide), poly(glycolide), Polymer Degradation and Stability, 84:393- 398, 2004.
Aoyagi Y, Yamashita K, Doi Y. Thermal degradation of poly[(R)-3-hydroxybutyrate], poly[- caprolactone], and poly[(S)-lactide], Polymer Degradation and Stability, 76:53-59, 2002.
Sivalingam G, Madras G. Thermal degradation of poly (ε-caprolactone), Polymer Degradation and Stability, 80:11-16, 2003.
Singh B, Sharma N. Mechanistic implications of plastic degradation, Polymer Degradation and Stability, 93:561-584, 2008.
Rakhshani M, Kamrannejad MM, Babaluo AA, Rezaei M, Aghjeh MR. Thermal degradation behavior and kinetic studies of polyacrylamide gel in TiO2 nanoparticles synthesis, Iranian Polymer Journal, 21:821-828, 2012.
Lee S, Jin BS, Lee JW. Thermal degradation kinetics of antimicrobial agent, Poly(hexamethylene guanidine) phosphate, Macromolecular Research, 14:491-498, 2006.
Wang D, Das A, Leuteritz A, Boldt R, Häußler L, Wagenknecht U, Heinrich G. Thermal degradation behaviors of a novel nanocomposite based on polypropylene and Co–Al layered double hydroxide, Polymer Degradation and Stability, 96:285-290, 2011.
Huadong W, Jie Y, Shengru L, Xiaojun W, Zheng Y, Guangxian L. Studies on the thermal degradation of poly(phenylene sulfide sulfone), Polymer Degradation and Stability, 83:229-235, 2004. [17] Flynn JH, Wall LA. A quick direct method for the determination of activation energy from thermogravimetric data, Journal of Polymer Science Part B: Polymer Letters, 4:323-328, 1966.
Ozawa T. A new method of analyzing thermogravimetric data, Bulletin of the Chemical Society of Japan, 38:1881-1886, 1965.
Kissinger HE. Reaction kinetics in differential thermal analysis, Analytical Chemistry, 29:1702- 1706, 1957.
AkahiraT, Sunose T. Joint convention of four electrical institutes, Research report (Chiba Institute of Technology) Sci Technol., 16:22-31, 1971.
Coats AW, Redfern JP. Kinetic parameters from thermogravimetric data, Nature, 201, 68-69, 1964.
Vardareli TK, Keskin S, Usanmaz A. Synthesis and characterization of poly(allyl methacrylate) obtained by free radical initiator, Journal of Macromolecular Science Part A: Pure and Applied Chemistry, 45:302-311, 2008.
Zulfigar S, Piracha A, Masud K. The thermal degradation of poly(allyl methacrylate), Polymer Degradation and Stability, 52:89-93, 1996.
Solpan D, Guven O. Thermal stability of the copolymers of allyl glycidyl ether with acrylonitrile and methyl methacrylate obtained via gamma irradiation, Radiation Physics and Chemistry, 57:173- 177, 2000.
Krul LP, Yakimtsova LB, Egorova EL, Matusevich YI, Selevich KA, Kurtikova AL, Preparation and Thermal Degradation of Methyl Methacrylate–Methacrylic Acid Copolymers, Russian Journal of Applied Chemistry, 82:1636-1643, 2009.
Ahmad Z, Al-Awadi NA, Al-Sagheer F. Thermal degradation studies in poly(vinyl chloride)/poly(methyl methacrylate) blends, Polymer Degradation and Stability, 93:456-465, 2008.
Schmidt V, Soldi V. Influence of polycaprolactone-triol addition on thermal stability of soy protein isolate based films, Polymer Degradation and Stability, 91:3124-3130, 2006.
Yildirim Y, Doğan B, Muğlalı S, Saltan F, Özkan M, Akat H. Synthesis, characterization, and thermal degradation kinetic of Polystyrene-g-Polycaprolactone, Journal of Applied Polymer Science, 126:1236–1246, 2012.
Faria EA, Prado AGS. Kinetic studies of the thermal degradation of cellulose acetate/niobium and chitosan/niobium composites, Reactive and Functional Polymers, 67:655-661, 2007.

Details

Primary Language

English

Subjects

-

Journal Section

-

Authors

Yeliz Yıldırım

Publication Date

July 14, 2016

Submission Date

March 8, 2016

Acceptance Date

-

Published in Issue

Year 2016 Volume: 17 Number: 2

DOI

https://doi.org/10.18038/btda.21961

IZ

https://izlik.org/JA74LD26PF

Cite

RIS / Bibtex

APA

Yıldırım, Y. (2016). Anadolu University Journal of Science and Technology A - Applied Sciences and Engineering, 17(2), 377-389. https://doi.org/10.18038/btda.21961

AMA

1.Yıldırım Y. AUJST-A. 2016;17(2):377-389. doi:10.18038/btda.21961

Chicago

Yıldırım, Yeliz. 2016. Anadolu University Journal of Science and Technology A - Applied Sciences and Engineering 17 (2): 377-89. https://doi.org/10.18038/btda.21961.

EndNote

Yıldırım Y (August 1, 2016) Anadolu University Journal of Science and Technology A - Applied Sciences and Engineering 17 2 377–389.

IEEE

[1]Y. Yıldırım, AUJST-A, vol. 17, no. 2, pp. 377–389, Aug. 2016, doi: 10.18038/btda.21961.

ISNAD

Yıldırım, Yeliz. Anadolu University Journal of Science and Technology A - Applied Sciences and Engineering 17/2 (August 1, 2016): 377-389. https://doi.org/10.18038/btda.21961.

JAMA

1.Yıldırım Y. AUJST-A. 2016;17:377–389.

MLA

Yıldırım, Yeliz. Anadolu University Journal of Science and Technology A - Applied Sciences and Engineering, vol. 17, no. 2, Aug. 2016, pp. 377-89, doi:10.18038/btda.21961.

Vancouver

1.Yeliz Yıldırım. AUJST-A. 2016 Aug. 1;17(2):377-89. doi:10.18038/btda.21961

Cited By

Synthesis and Characterization of a New Cryogel Matrix for Covalent Immobilization of Catalase

Gels

https://doi.org/10.3390/gels8080501