The objectives of this study were to determine the effect of different cutting lengths, and IBA (Indole-3butyric acid) on rooting of jujube (Ziziphus jujuba Mill.) cuttings. The cuttings collected at 27 January in 2015. After pre-treating with 0, 2500, and 5000 ppm IBA, the cuttings with 15 cm, 20 cm, and 25 cm cutting length were rooted in unheated greenhouse with a bottom heated mist propagation frame containing perlite medium. Hardwood cuttings were exposed to the rooting media for 90 days and then they all were removed from the media to determine the rooting and viability rates, the most developed roots in both length and width, lateral root number, root wet and dry weight, and root quality. As a result of the study, the highest rooting and rooting quality were obtained from hardwood cuttings prepared with 25 cm cutting length. All the cuttings were treated with 2500 and 5000 ppm IBA. The highest rooting percentage cutting length is 25 cm (33.33%), IBA as 2500 ppm dose (33.55%) was obtained. The highest quality value cutting stem length is 25 cm (2,56), IBA as 5000 ppm (2,22) was obtained. The lowest results in studies of all quality criteria are taken from cutting in control group.
Bu çalışma, Hünnapta (Ziziphus jujuba Mill.) farklı çelik boylarının ve IBA (İndol Bütirik Asit) dozlarının köklenmeye etkisini belirlemek amacıyla yürütülmüştür. Odun çelikleri 27 Ocak tarihinde Amasya ilinden alınmıştır. 15 cm, 20 cm ve 25 cm büyüklüğünde hazırlanan çeliklere 0, 2500 ve 5000 ppm IBA uygulaması yapıldıktan sonra, alttan ısıtma ve mistleme ünitesine sahip, ısıtmasız cam serada, perlit ortamında köklenmeye alınmıştır. Köklendirme ortamından 90 gün sonra sökülen çeliklerde köklenme ve canlılık oranları, en gelişmiş kök uzunluğu ve çapı, kök yaş ve kuru ağırlığı, kök sayısı ve kalitesi belirlenmiştir. Araştırma sonucunda, köklenme oranı ve kök kalitesi bakımından en yüksek sonuçlar 25cm çelik boyu uzunluğunda 2500 ile 5000 ppm IBA uygulaması yapılan çeliklerden alınmıştır. En yüksek köklenme oranı çelik boyu olarak 25 cm (%33,33), IBA dozu olarak ta 2500 ppm dozunda (%33,55) elde edilmiştir. En yüksek kök kalitesi değerleri ise çelik boyu olarak 25 cm (2,56), IBA dozu olarak ta 5000 ppm’den (2,22) elde edilmiştir. Yapılan çalışmada bütün kalite kriterlerinde en düşük sonuçlar kontrol uygulaması yapılan çeliklerden alınmıştır.
Primary Language | Turkish |
---|---|
Subjects | Agricultural Engineering (Other) |
Journal Section | Makaleler |
Authors | |
Publication Date | March 31, 2016 |
Submission Date | January 1, 2016 |
Acceptance Date | January 31, 2016 |
Published in Issue | Year 2016 Volume: 45 Issue: (Özel Sayı 1) 7. Ulusal Bahçe Bitkileri Kongresi |
BAHCE Journal
bahcejournal@gmail.com
https://bahcejournal.org
Atatürk Horticultural Central Research Institute, Yalova 77100 TÜRKİYE
X (Twitter), Linkedin, Facebook, Instagram