Ülkemizde yaklaşık 2.7 milyon ton üretim miktarına sahip olan biberde, ilk sırayı %44’lik bir oran ile kapya biber ürün grubu almaktadır. Kapya biberler, gıda sanayiinde yoğun olarak kullanılmaktadır. İşleme türüne bağlı olarak tohum ve saplarının çıkarılması işlemi, insan işgücü ile yapıldığı için işçilik maliyetleri artmakta ve üretim hızı da yavaşlamaktadır. Bu çalışma tohum içermeyen kapya biber ıslahında kullanılacak tetraploid bitkiler elde etme amacıyla planlanmıştır. Bitkisel materyal olarak ‘Petektar Tohum’ Antalya firmasına ait 12 farklı kapya biber genotipi kullanılmıştır. Seçilen diploid kromozom sayısına sahip genotiplerin katlanmalarını sağlamak üzere, genç bitkilerin koltuk tomurcuklarına, 12 ve 24 saat süresince %0.3 ve %0.5’lik kolhisin uygulaması yapılmıştır. Kolhisin uygulanan yaklaşık 480 adet bitkiden morfolojik özelliklerine göre belirlenen 151 adet bitki ve kontrol uygulamasından da 12 adet bitki olmak üzere toplam 163 adet bitkinin ploidi seviyeleri, flow sitometri yöntemi ile incelenmiştir. Flow sitometri analizi sonucunda, 12 saat süreyle %0.3’lük kolhisin dozu uygulamasından yaklaşık %12.24 oranında, 24 saat %0.3 kolhisin dozu uygulamasından yaklaşık %46.6 oranında, 12 saat %0.5 kolhisin dozu uygulamasından ise yaklaşık %32 oranında tetraploid bitki tespit edilmiştir. Tetraploid bitkiler kendilenerek sağlıklı tohumlar elde edilmiştir. Sonuç olarak, koltuk sürgünlerine yapılan kolhisin uygulamalarının, poliploid bitki elde etme konusunda etkili bir yöntem olduğu ortaya konmuştur.
Capia pepper takes the first place with 44% of the 2.7 million tons of pepper production in our country. Capia peppers are used extensively in the food industry. Depending on the type of processing, labor costs increase and production speed slows down due to the removal of seeds and fruit stalks, which is done with human labor. The goal of this study was to obtain tetraploid plants for seedless capia pepper production. Twelve different capia pepper genotypes of Petektar Tohum, Antalya, were used as plant material. To ensure folding of the chromosome number of the selected diploid genotypes, 0.3% and 0.5% colchicine were applied to the axillary buds of diploid young plants for 12 and 24 hours. Ploidy levels of a total of 163 plants, which consist of 151 plants determined according to their morphological characteristics from approximately 480 colchicine applied plants and 12 plants from control applications, were examined by flow cytometry. As a result of flow cytometry analysis, approximately 12.24% of tetraploid plants were detected from the application of 0.3% colchicine dose for 12 hours, approximately 46.6% from the application of 0.3% colchicine dose for 24 hours, and approximately 32% from the application of 0.5% colchicine dose for 12 hours. Healthy seeds were obtained by selfing tetraploid plants. As a result, it has been shown that applying colchicine to axillary shoots is an efficient method for creating polyploid plants.
| Primary Language | Turkish |
|---|---|
| Subjects | Agricultural Engineering (Other) |
| Journal Section | Makaleler |
| Authors | |
| Publication Date | December 19, 2022 |
| Submission Date | January 1, 2022 |
| Acceptance Date | January 31, 2022 |
| Published in Issue | Year 2022 Volume: 51 Issue: (Özel Sayı 1) 13. Sebze Tarımı Sempozyumu |
BAHCE Journal
bahcejournal@gmail.com
https://bahcejournal.org
Atatürk Horticultural Central Research Institute, Yalova 77100 TÜRKİYE
X (Twitter), Linkedin, Facebook, Instagram