Research Article

Semi-conductor Applications to Printed Circuits on Flexible Surfaces

Volume: 10 Number: 3 July 30, 2022
EN

Semi-conductor Applications to Printed Circuits on Flexible Surfaces

Abstract

The most common type of identification system today is RFID. RFID circuits are used as covered with plastic. With the increase in usage areas, it is also used on metal, wood, paper, and plastic product. In this study, the behavior of the same circuit on different surfaces was investigated. The surface impedance and signal reflection coefficients of RFID tag antennas were investigated based on paper, plastic, and textile surfaces. According to the results of the electrical and mechanical tests, the best results in terms of reflectance coefficients and surface impedances of RFID tags are on PET surfaces. The surface impedance and the reflection coefficients were high on paper surfaces. The lowest values were measured on textile surfaces. According to the results, it has been seen that RFID antenna application on plastic, paper, and textile surfaces is possible and usable.

Keywords

References

  1. [1] Sweeney P. J., “RFID for Dummies”, 1st Edition, Wiley Publishing Inc., Indiana, USA, 2005.
  2. [2] https://www.upu.int/UPU/media/upu/files/postalSolutions/programmesAndServices/standards/S10-12.pdf Online: 15.01.2022
  3. [3] Bilgin, M., “Biyometrik Seçim Sistemi Tasarımı ve Gerçekleştirilmesi”, Thesis of MSc, Selçuk University Institute of Pure and Applied Sciences, Konya, Türkiye, 2008.
  4. [4] B. Eren, “Biyometrik Teknolojilerin Etkili Tasarlanması ve Uygulanmasında Yeni Bir Öneri: Multimodel Teknoloji”, Thesis of MSc, Mimar Sinan Fine Arts University Institute of Pure and Applied Sciences, İstanbul, Türkiye, 2009.
  5. [5] J.M. Sardroud, “Influence of RFID technology on automated management of construction materials and components”, Scientia Iranica, Vol. 19, No. 3, 2012, pp. 381-392.
  6. [6] X. Zhu, S.K. Mukhopadhyay, H. Kurata, “A Review of RFID Technology and Its Managerial Applications in Different Industries” Journal of Engineering and Technology Management, Vol. 29, No. 1, 2012, pp. 152–167.
  7. [7] Y. Wang, Y. Huang, Y. Li, P. Cheng, S. Cheng, Q. Liang et. al., “A facile process combined with roll-to-roll flexographic printing and electroless deposition to fabricate RFID tag antenna on paper substrates”, Composites Part B: Engineering, Vol: 224, November 2021, pp. 109194.
  8. [8] S. Kalaycı, “Design of A Radio Frequency Identification (Rfid) Antenna”, Thesis of MSc, Middle East Technical University Institute of Pure and Applied Sciences, Ankara, Türkiye, 2009.

Details

Primary Language

English

Subjects

Electrical Engineering

Journal Section

Research Article

Publication Date

July 30, 2022

Submission Date

March 28, 2022

Acceptance Date

June 22, 2022

Published in Issue

Year 2022 Volume: 10 Number: 3

APA
Ekren, N., & Sarkın, A. S. (2022). Semi-conductor Applications to Printed Circuits on Flexible Surfaces. Balkan Journal of Electrical and Computer Engineering, 10(3), 273-277. https://doi.org/10.17694/bajece.1094805
AMA
1.Ekren N, Sarkın AS. Semi-conductor Applications to Printed Circuits on Flexible Surfaces. Balkan Journal of Electrical and Computer Engineering. 2022;10(3):273-277. doi:10.17694/bajece.1094805
Chicago
Ekren, Nazmi, and Ali Samet Sarkın. 2022. “Semi-Conductor Applications to Printed Circuits on Flexible Surfaces”. Balkan Journal of Electrical and Computer Engineering 10 (3): 273-77. https://doi.org/10.17694/bajece.1094805.
EndNote
Ekren N, Sarkın AS (July 1, 2022) Semi-conductor Applications to Printed Circuits on Flexible Surfaces. Balkan Journal of Electrical and Computer Engineering 10 3 273–277.
IEEE
[1]N. Ekren and A. S. Sarkın, “Semi-conductor Applications to Printed Circuits on Flexible Surfaces”, Balkan Journal of Electrical and Computer Engineering, vol. 10, no. 3, pp. 273–277, July 2022, doi: 10.17694/bajece.1094805.
ISNAD
Ekren, Nazmi - Sarkın, Ali Samet. “Semi-Conductor Applications to Printed Circuits on Flexible Surfaces”. Balkan Journal of Electrical and Computer Engineering 10/3 (July 1, 2022): 273-277. https://doi.org/10.17694/bajece.1094805.
JAMA
1.Ekren N, Sarkın AS. Semi-conductor Applications to Printed Circuits on Flexible Surfaces. Balkan Journal of Electrical and Computer Engineering. 2022;10:273–277.
MLA
Ekren, Nazmi, and Ali Samet Sarkın. “Semi-Conductor Applications to Printed Circuits on Flexible Surfaces”. Balkan Journal of Electrical and Computer Engineering, vol. 10, no. 3, July 2022, pp. 273-7, doi:10.17694/bajece.1094805.
Vancouver
1.Nazmi Ekren, Ali Samet Sarkın. Semi-conductor Applications to Printed Circuits on Flexible Surfaces. Balkan Journal of Electrical and Computer Engineering. 2022 Jul. 1;10(3):273-7. doi:10.17694/bajece.1094805

Cited By

All articles published by BAJECE are licensed under the Creative Commons Attribution 4.0 International License. This permits anyone to copy, redistribute, remix, transmit and adapt the work provided the original work and source is appropriately cited.Creative Commons Lisansı