Research Article
BibTex RIS Cite
Year 2018, Volume: 6 , 1 - 5, 01.04.2018
https://doi.org/10.17694/bajece.410190

Abstract

References

  • [1]. Akuner, C. & Huner, E. The Air Gap and Angle Optimization in the Axial Flux Permanent Magnet Motor, Electronics and Electrical Engineering, 2011, 110(4).
  • [2]. Caricchi, F. Crescimbini, F. Honorati, O. Performance of Coreless-Winding Axial-Flux Prmanent Magnet Generator with Power Output at 400 Hz, 300 r/m, IEEE Transactions on Industry Applications, Vol.34, No.2, 1999, pp.1263–69.
  • [3]. Muljadi Eduard, C.P. Butterfield, Yih huie Wan, Axial-flux modular permanent-magnet generator with a toroidal winding for wind-turbine applications, IEEE Transactions on Industry Applications Vol.35, No.4, 1999, pp. 831–36.
  • [4]. Chalmers, B. J., W. Wu, E. Spooner, An axial-flux permanent-magnet generator for a gearless wind energy system, IEEE Transactions on Energy Conversion, Vol.14, No.2, 1999, pp.251–56.
  • [5]. Wang Rong Jie, Maarten J. Kamper, Kobus Van Der Westhuizen, Jacek F. Gieras, Optimal design of a coreless stator axial flux permanent-magnet generator, IEEE Transactions on Magnetics Vol.41, No.11, 2005, pp. 55–64.
  • [6]. Holmes Andrew S., Guodong Hong,Keith R. Pullen, Axial-Flux Permanent Magnet Machines for Micropower Generation, Journal of Microelectromechanical Systems, Vol.14, No.1, 2005, pp. 54–62.
  • [7]. Chan, T. F., L. Lai, An axial-flux permanent-magnet synchronous generator for a direct-coupled wind-turbine system, IEEE Transactions on Energy Conversion Vol.22, No.1, 2007, pp.86–94.
  • [8]. Hosseini Seyed Mohsen, Mojtaba Agha-mirsalim, Mehran Mirzaei Permanent-Magnet Generator, Vol.44, No.1, 2008, pp.75-80.
  • [9]. Minaz Mehmet Recep, Mehmet Çelebi, Design and analysis of a new axial flux coreless {PMSG} with three rotors and double stators, Results in Physics (7), pp.183–88.
  • [10]. Huner, Engin. Caner, Akuner. Axial-flux synchronous machines compared with different stator structures for use in working, Przeglad Elektrotechniczny Vol.88, No.11, 2012, pp. 174–177.
  • [11]. Hüner, Engin. Küçük Güçlü Rüzgar Türbi̇nleri İçi̇n 3D Sey Programi ile Ipms Alternatörün Elektromanyeti̇k Tasarımı Ve Anali̇zi̇, Kırklareli University Journal of Engineering and Science, Vol.2, No.1, 2016, pp.60–73.
  • [12]. Naeini Vahid, Mohammad Ardebili, New axial flux PM less synchronous machine with concentrated DC field on stator, International Journal of Electrical Power and Energy Systems, (67), 2015, pp. 651–58.
  • [13]. Kalender, Osman et al., A new axial flux permanent magnet synchronous alternator autonomously adapted to wind speeds, Measurement: Journal of the International Measurement Confederation (69), 2015, pp. 87–94.
  • [14]. Ghulam, Ahma. Uzma, Amin. “Design, construction and study of small scale vertical axis wind turbine based on a magnetically levitated axial flux permanent magnet generator, (101), pp. 286–92.

The Design and Magnetic Analysis of MultiDisc and Layer Winding Toroidal Axial Flux Permanent Magnet Open Slotted (MLTAFPMOS) Synchronous Alternator

Year 2018, Volume: 6 , 1 - 5, 01.04.2018
https://doi.org/10.17694/bajece.410190

Abstract

In this study, a new multidisc and layer winding
toroidal axial flux permanent magnet open slotted (MLTAFPMOS) synchronous
alternators are designed and magnetic analysis was performed. Axial flux (AF)
alternators are a very good candidate for wind turbine applications. However,
one of the disadvantages AF alternators is to increase AF alternator diameter with
AF alternator power. The junction points of AF alternator rotor shaft and disc
have a very huge torques via occurring from inner rotor diameter forces to
outer rotor diameter forces. Therefore mechanically problems emerge with increasing
alternator powers. The ideal solution for this situation is to use a multidisc
structure. In this study, a multidisc design for LTAFPMOS synchronous
alternator was developed. A 3d solid model of the developed design was
obtained. Then magnetic analyzes were performed via Maxwell. It is decided that
the multidisc structure is ideal to increase the alternator power as a result of
analyzes. In addition, forces at the junction points is decreased via multidisc
structures.

References

  • [1]. Akuner, C. & Huner, E. The Air Gap and Angle Optimization in the Axial Flux Permanent Magnet Motor, Electronics and Electrical Engineering, 2011, 110(4).
  • [2]. Caricchi, F. Crescimbini, F. Honorati, O. Performance of Coreless-Winding Axial-Flux Prmanent Magnet Generator with Power Output at 400 Hz, 300 r/m, IEEE Transactions on Industry Applications, Vol.34, No.2, 1999, pp.1263–69.
  • [3]. Muljadi Eduard, C.P. Butterfield, Yih huie Wan, Axial-flux modular permanent-magnet generator with a toroidal winding for wind-turbine applications, IEEE Transactions on Industry Applications Vol.35, No.4, 1999, pp. 831–36.
  • [4]. Chalmers, B. J., W. Wu, E. Spooner, An axial-flux permanent-magnet generator for a gearless wind energy system, IEEE Transactions on Energy Conversion, Vol.14, No.2, 1999, pp.251–56.
  • [5]. Wang Rong Jie, Maarten J. Kamper, Kobus Van Der Westhuizen, Jacek F. Gieras, Optimal design of a coreless stator axial flux permanent-magnet generator, IEEE Transactions on Magnetics Vol.41, No.11, 2005, pp. 55–64.
  • [6]. Holmes Andrew S., Guodong Hong,Keith R. Pullen, Axial-Flux Permanent Magnet Machines for Micropower Generation, Journal of Microelectromechanical Systems, Vol.14, No.1, 2005, pp. 54–62.
  • [7]. Chan, T. F., L. Lai, An axial-flux permanent-magnet synchronous generator for a direct-coupled wind-turbine system, IEEE Transactions on Energy Conversion Vol.22, No.1, 2007, pp.86–94.
  • [8]. Hosseini Seyed Mohsen, Mojtaba Agha-mirsalim, Mehran Mirzaei Permanent-Magnet Generator, Vol.44, No.1, 2008, pp.75-80.
  • [9]. Minaz Mehmet Recep, Mehmet Çelebi, Design and analysis of a new axial flux coreless {PMSG} with three rotors and double stators, Results in Physics (7), pp.183–88.
  • [10]. Huner, Engin. Caner, Akuner. Axial-flux synchronous machines compared with different stator structures for use in working, Przeglad Elektrotechniczny Vol.88, No.11, 2012, pp. 174–177.
  • [11]. Hüner, Engin. Küçük Güçlü Rüzgar Türbi̇nleri İçi̇n 3D Sey Programi ile Ipms Alternatörün Elektromanyeti̇k Tasarımı Ve Anali̇zi̇, Kırklareli University Journal of Engineering and Science, Vol.2, No.1, 2016, pp.60–73.
  • [12]. Naeini Vahid, Mohammad Ardebili, New axial flux PM less synchronous machine with concentrated DC field on stator, International Journal of Electrical Power and Energy Systems, (67), 2015, pp. 651–58.
  • [13]. Kalender, Osman et al., A new axial flux permanent magnet synchronous alternator autonomously adapted to wind speeds, Measurement: Journal of the International Measurement Confederation (69), 2015, pp. 87–94.
  • [14]. Ghulam, Ahma. Uzma, Amin. “Design, construction and study of small scale vertical axis wind turbine based on a magnetically levitated axial flux permanent magnet generator, (101), pp. 286–92.
There are 14 citations in total.

Details

Primary Language English
Journal Section Araştırma Articlessi
Authors

Engin Huner

M. Caner Akuner

Publication Date April 1, 2018
Published in Issue Year 2018 Volume: 6

Cite

APA Huner, E., & Akuner, M. C. (2018). The Design and Magnetic Analysis of MultiDisc and Layer Winding Toroidal Axial Flux Permanent Magnet Open Slotted (MLTAFPMOS) Synchronous Alternator. Balkan Journal of Electrical and Computer Engineering, 6, 1-5. https://doi.org/10.17694/bajece.410190

All articles published by BAJECE are licensed under the Creative Commons Attribution 4.0 International License. This permits anyone to copy, redistribute, remix, transmit and adapt the work provided the original work and source is appropriately cited.Creative Commons Lisansı