Transmission line fault location: Simulation of real faults using wavelet transform based travelling wave methods

Year 2019, , 88 - 98, 27.12.2019

Mustafa Akdag , Sabir Rustemlı

https://doi.org/10.17678/beuscitech.653273

Cited By: 1

Abstract

In this study, High Voltage Transmission Line fault location accuracy of distance relays running impedance algorithm are compared with Travelling Wave (TW) method. Line faults in 154 kV Tatvan – Muş and 154 kV Patnos-Erciş lines in Turkish Electrical Transmission System are analyzed. Real faults in both lines are simulated in MATLAB-SIMULINK. Tower configuration and conductor properties of the lines and the source impedances are included in the simulation to comply with real system. Simulations show that both single-end and double-end Wavelet Transform (WT) based TW methods have better accuracy then the distance relays computing fault location by impedance methods.

Keywords

Fault Location, Transmission line, Travelling Wave, Wavelet Transform

References

• [1] K. Zimmerman and D. Costello, “Impedance-based fault location experience,” 2005 58th Annu. Conf. Prot. Relay Eng., vol. 2005, pp. 211–226, 2005.
• [2] P. Jafarian and M. Sanaye-Pasand, “A traveling-wave-based protection technique using wavelet/pca analysis,” IEEE Trans. Power Deliv., vol. 25, no. 2, pp. 588–599, 2010.
• [3] X. Lin, F. Zhao, G. Wu, Z. Li, and H. Weng, “Universal wavefront positioning correction method on traveling-wave-based fault-location algorithms,” IEEE Trans. Power Deliv., vol. 27, no. 3, pp. 1601–1610, 2012.
• [4] K. Glik, D. D. Rasolomampionona, and R. Kowalik, “Detection, classification and fault location in HV lines using travelling waves,” Prz. Elektrotechniczny, vol. 88, no. 1 A, pp. 269–275, 2012.
• [5] N. Fischer, V. Skendzic, R. Moxley, and J. Needs, “Protective relay traveling wave fault location,” IET Conf. Publ., vol. 2012, no. 593 CP, pp. 2–4, 2012.
• [6] P. Sharma, D. Saini, and A. Saxena, “Fault Detection and Classification in Transmission Line Using Wavelet Transform and ANN,” Bull. Electr. Eng. Informatics, vol. 5, no. 3, pp. 2058–2063, 2016.
• [7] V. Siozinys and R. Urniezius, “Transmission line protection and fault location based on travelling wave measurement,” Elektron. ir Elektrotechnika, vol. 19, no. 9, pp. 21–24, 2013.
• [8] M. S. Mamiş, M. Arkan, and C. Keleş, “Transmission lines fault location using transient signal spectrum,” Int. J. Electr. Power Energy Syst., vol. 53, no. 1, pp. 714–718, Dec. 2013.
• [9] D. Akmaz, M. S. Mamiş, M. Arkan, and M. E. Tagluk, “Fault location determination for transmission lines with different series-compensation levels using transient frequencies,” Turkish J. Electr. Eng. Comput. Sci., vol. 25, no. 5, pp. 3764–3775, 2017.
• [10] D. Akmaz, M. S. Mamiş, M. Arkan, and M. E. Tağluk, “Transmission line fault location using traveling wave frequencies and extreme learning machine,” Electr. Power Syst. Res., vol. 155, pp. 1–7, 2018.
• [11] L. Y. Bewley, “Traveling Waves on Transmission Systems,” Trans. Am. Inst. Electr. Eng., vol. 50, no. 2, pp. 532–550, 1931.
• [12] D. A. Douglass, “Current Transformer Accuracy with Asymmetric and High Frequency Fault Currents,” IEEE Power Eng. Rev., vol. PER-1, no. 3, pp. 41–42, 1981.
• [13] E. Clarke, Circuit Analysis of A-C Power Systems; Symmetrical and Related Components. Wiley, 1943.
• [14] I. Daubechius, “Ten Lectures of Wavelets,” Philadelphia, PASosiety Ind. Appl. Math. Anal., pp. 1544–1576, 1992.
• [15] M. Baradar, S. Afsharnia, and M. Sanaye-Pasand, “A fast method for fault section identification in series compensated transmission lines,” 2010 9th Conf. Environ. Electr. Eng. EEEIC 2010, pp. 483–486, 2010.