Research Article
BibTex RIS Cite

Characterization of GG/GO hybrid hydrogel for strain sensor application

Year 2022, Volume: 3 Issue: 1, 7 - 10, 21.06.2022
https://doi.org/10.51539/biotech.1033173

Abstract

Hydrogel materials are 3D polymeric materials that have a wide range of applications. Strain-sensor applications, one of the application areas of hydrogels, continue to attract the attention of researchers. In this study, gellan gum-graphene oxide (GG/GO) hybrid hydrogels were synthesized for strain-sensor application. FTIR, XRD, and SEM measurements and strain sensor application analyses of the synthesized hydrogels were performed. It has been observed that the GG/GO hybrid hydrogels obtained as a result of the findings are promising for strain-sensor applications.

Supporting Institution

Sakarya Üniversitesi

Project Number

2019-6-23-223

Thanks

This work was supported by the Scientific Research Projects Commission of Sakarya University (Project number: 2019-6-23-223).

References

  • Afsarimanesh N, Nag A, Sarkar S, Shafiei, G (2020) Sensors and Actuators A : Physical A review on fabrication, characterization and implementation of wearable strain sensors. Sensors & Actuators: A Physical, 315, 112355
  • Kailasa SK, Joshi DJ, Kateshiya MR, Koduru JR, Malek NI (2022) Review on the biomedical and sensing applications of nanomaterial-incorporated hydrogels. Materials Today Chemistry, 23, 100746
  • Liu YJ, Cao WT, Ma MG, Wan P (2017) Ultrasensitive wearable soft strain sensors of conductive, self-healing, and elastic hydrogels with synergistic “soft and hard” hybrid networks. ACS Applied Materials and Interfaces, 9, 25559–25570
  • Lu Y, Zhao X, Fang S (2019) Characterization, antimicrobial properties and coatings application of gellan gum oxidized with hydrogen peroxide. Foods, 8, 1–12
  • Niu Y, Liu H, He R, Li Z, Ren H, Gao B, Guo H, Genin GM, Xu F (2020) The new generation of soft and wearable electronics for health monitoring in varying environment: From normal to extreme conditions. Materials Today, 41, 219-242
  • Rahmani P, Shojaei A (2021) A review on the features, performance and potential applications of hydrogel-based wearable strain/pressure sensors. Advances in Colloid and Interface Science, 298, 102553
  • Sun H, Zhou K, Yu Y, Yue X, Dai K, Zheng G, Liu C, Shen C (2019) Highly stretchable, transparent, and bio-friendly strain sensor based on self-recovery ıonic-covalent hydrogels for human motion monitoring. Macromolecular Materials and Engineering, 304, 1–10
  • Tang L, Wu S, Qu J, Gong L, Tang J (2020) A review of conductive hydrogel used in flexible strain sensor. Materials, 13, 1–17
  • Zhang W, Feng P, Chen J, Sun Z, Zhao B (2019) Electrically conductive hydrogels for flexible energy storage systems. Progress in Polymer Science, 88, 220-240
  • Wang L, Xu T, Zhang X (2021) Trends in analytical chemistry multifunctional conductive hydrogel-based flexible wearable sensors. Trends in Analytical Chemistry, 134, 116130
  • Wang P, Luo Z, Xiao Z (2021) Preparation, physicochemical characterization and in vitro release behavior of resveratrol-loaded oxidized gellan gum / resistant starch hydrogel beads.
Year 2022, Volume: 3 Issue: 1, 7 - 10, 21.06.2022
https://doi.org/10.51539/biotech.1033173

Abstract

Project Number

2019-6-23-223

References

  • Afsarimanesh N, Nag A, Sarkar S, Shafiei, G (2020) Sensors and Actuators A : Physical A review on fabrication, characterization and implementation of wearable strain sensors. Sensors & Actuators: A Physical, 315, 112355
  • Kailasa SK, Joshi DJ, Kateshiya MR, Koduru JR, Malek NI (2022) Review on the biomedical and sensing applications of nanomaterial-incorporated hydrogels. Materials Today Chemistry, 23, 100746
  • Liu YJ, Cao WT, Ma MG, Wan P (2017) Ultrasensitive wearable soft strain sensors of conductive, self-healing, and elastic hydrogels with synergistic “soft and hard” hybrid networks. ACS Applied Materials and Interfaces, 9, 25559–25570
  • Lu Y, Zhao X, Fang S (2019) Characterization, antimicrobial properties and coatings application of gellan gum oxidized with hydrogen peroxide. Foods, 8, 1–12
  • Niu Y, Liu H, He R, Li Z, Ren H, Gao B, Guo H, Genin GM, Xu F (2020) The new generation of soft and wearable electronics for health monitoring in varying environment: From normal to extreme conditions. Materials Today, 41, 219-242
  • Rahmani P, Shojaei A (2021) A review on the features, performance and potential applications of hydrogel-based wearable strain/pressure sensors. Advances in Colloid and Interface Science, 298, 102553
  • Sun H, Zhou K, Yu Y, Yue X, Dai K, Zheng G, Liu C, Shen C (2019) Highly stretchable, transparent, and bio-friendly strain sensor based on self-recovery ıonic-covalent hydrogels for human motion monitoring. Macromolecular Materials and Engineering, 304, 1–10
  • Tang L, Wu S, Qu J, Gong L, Tang J (2020) A review of conductive hydrogel used in flexible strain sensor. Materials, 13, 1–17
  • Zhang W, Feng P, Chen J, Sun Z, Zhao B (2019) Electrically conductive hydrogels for flexible energy storage systems. Progress in Polymer Science, 88, 220-240
  • Wang L, Xu T, Zhang X (2021) Trends in analytical chemistry multifunctional conductive hydrogel-based flexible wearable sensors. Trends in Analytical Chemistry, 134, 116130
  • Wang P, Luo Z, Xiao Z (2021) Preparation, physicochemical characterization and in vitro release behavior of resveratrol-loaded oxidized gellan gum / resistant starch hydrogel beads.
There are 11 citations in total.

Details

Primary Language English
Subjects Biomaterial , Nanotechnology
Journal Section Research Articles
Authors

Serbülent Türk

Burak Ünlü 0000-0001-5109-9686

Mahmut Özacar

Project Number 2019-6-23-223
Early Pub Date June 4, 2022
Publication Date June 21, 2022
Acceptance Date February 18, 2022
Published in Issue Year 2022 Volume: 3 Issue: 1

Cite

APA Türk, S., Ünlü, B., & Özacar, M. (2022). Characterization of GG/GO hybrid hydrogel for strain sensor application. Bulletin of Biotechnology, 3(1), 7-10. https://doi.org/10.51539/biotech.1033173
AMA Türk S, Ünlü B, Özacar M. Characterization of GG/GO hybrid hydrogel for strain sensor application. Bull. Biotechnol. June 2022;3(1):7-10. doi:10.51539/biotech.1033173
Chicago Türk, Serbülent, Burak Ünlü, and Mahmut Özacar. “Characterization of GG/GO Hybrid Hydrogel for Strain Sensor Application”. Bulletin of Biotechnology 3, no. 1 (June 2022): 7-10. https://doi.org/10.51539/biotech.1033173.
EndNote Türk S, Ünlü B, Özacar M (June 1, 2022) Characterization of GG/GO hybrid hydrogel for strain sensor application. Bulletin of Biotechnology 3 1 7–10.
IEEE S. Türk, B. Ünlü, and M. Özacar, “Characterization of GG/GO hybrid hydrogel for strain sensor application”, Bull. Biotechnol., vol. 3, no. 1, pp. 7–10, 2022, doi: 10.51539/biotech.1033173.
ISNAD Türk, Serbülent et al. “Characterization of GG/GO Hybrid Hydrogel for Strain Sensor Application”. Bulletin of Biotechnology 3/1 (June 2022), 7-10. https://doi.org/10.51539/biotech.1033173.
JAMA Türk S, Ünlü B, Özacar M. Characterization of GG/GO hybrid hydrogel for strain sensor application. Bull. Biotechnol. 2022;3:7–10.
MLA Türk, Serbülent et al. “Characterization of GG/GO Hybrid Hydrogel for Strain Sensor Application”. Bulletin of Biotechnology, vol. 3, no. 1, 2022, pp. 7-10, doi:10.51539/biotech.1033173.
Vancouver Türk S, Ünlü B, Özacar M. Characterization of GG/GO hybrid hydrogel for strain sensor application. Bull. Biotechnol. 2022;3(1):7-10.