Review

Microplastics: An Overview of Sources, Distribution, and Removal Methods

Volume: 8 Number: 5 September 15, 2025
TR EN

Microplastics: An Overview of Sources, Distribution, and Removal Methods

Abstract

Microplastics (MPs), defined as plastic particles smaller than 5 mm, are persistent pollutants increasingly detected in both aquatic and terrestrial ecosystems due to widespread anthropogenic activity. Their small size and non-biodegradable nature allow them to accumulate and exert complex effects on biotic systems not only through physical presence but also by transporting harmful substances such as endocrine-disrupting chemicals and heavy metals. This review identifies primary and secondary sources of MPs, outlines their environmental distribution pathways, and evaluates their behavior in different ecosystems. Furthermore, it critically examines current microplastic removal technologies, highlighting limitations in spectroscopic and microscopic detection methods and comparing the effectiveness of traditional treatment systems with advanced approaches such as membrane filtration and nanomaterials. The study concludes with targeted recommendations for improving removal efficiency and monitoring strategies, emphasizing the need for interdisciplinary collaboration and policy support to address microplastic pollution sustainably.

Keywords

References

  1. Agull AT, Karanasiou A, Moreno T, Lacorte S. 2021. Overview on the occurrence of microplastics in air and implications from the use of face masks during the COVID-19 pandemic. Sci Total Environ 800: 149555. https://doi.org/10.1016/j.scitotenv.2021.149555
  2. Ahmad S, Singh R, Arfin T, Neeti K. 2022. Fluoride contamination, consequences and removal techniques in water: a review. Environ Sci Adv 1(5): 620–661.
  3. Akbulut G, Kılıç E. 2025. Determination of Seasonal Microplastic Pollution Variation in Aquatic Environments: Case Study from Iskenderun Technical University Pond. Bull Environ Contam Toxicol 114(3). https://doi.org/10.1007/s00128-024-03979-7
  4. Altunışık A. 2023. Prevalence of microplastics in commercially sold soft drinks and human risk assessment. J Environ Manage 336: 117720. https://doi.org/10.1016/j.jenvman.2023.117720
  5. Alvim CB, Mendoza-Roca JA, Bes-Pia A. 2020. Wastewater treatment plant as microplastics release source – Quantification and identification techniques. J Environ Manage 255: 109739. https://doi.org/10.1016/j.jenvman.2019.109739
  6. Amato-Lourenço LF, dos Santos Galvão L, de Weger LA, Hiemstra PS, Vijver MG, Mauad T. 2020. An emerging class of air pollutants: potential effects of microplastics to respiratory human health? Sci Total Environ 749: 141676. https://doi.org/10.1016/j.scitotenv.2020.141676
  7. Anand U, Dey S, Bontempi E, Ducoli S, Vethaak AD, Dey A, Federici S. 2023. Biotechnological methods to remove microplastics: a review. Environ Chem Lett 21(3): 1787–1810. https://doi.org/10.1007/s10311-022-01552-4
  8. Andrady AL. 2011. Microplastics in the marine environment. Mar Pollut Bull 62(8): 1596–1605.

Details

Primary Language

English

Subjects

Environmental Pollution and Prevention, Global Environmental Engineering

Journal Section

Review

Early Pub Date

September 12, 2025

Publication Date

September 15, 2025

Submission Date

August 7, 2025

Acceptance Date

September 9, 2025

Published in Issue

Year 2025 Volume: 8 Number: 5

APA
Sancak, Ş., Şimşek, A., & Bakan, G. (2025). Microplastics: An Overview of Sources, Distribution, and Removal Methods. Black Sea Journal of Engineering and Science, 8(5), 1659-1673. https://doi.org/10.34248/bsengineering.1760593
AMA
1.Sancak Ş, Şimşek A, Bakan G. Microplastics: An Overview of Sources, Distribution, and Removal Methods. BSJ Eng. Sci. 2025;8(5):1659-1673. doi:10.34248/bsengineering.1760593
Chicago
Sancak, Şule, Arife Şimşek, and Gülfem Bakan. 2025. “Microplastics: An Overview of Sources, Distribution, and Removal Methods”. Black Sea Journal of Engineering and Science 8 (5): 1659-73. https://doi.org/10.34248/bsengineering.1760593.
EndNote
Sancak Ş, Şimşek A, Bakan G (September 1, 2025) Microplastics: An Overview of Sources, Distribution, and Removal Methods. Black Sea Journal of Engineering and Science 8 5 1659–1673.
IEEE
[1]Ş. Sancak, A. Şimşek, and G. Bakan, “Microplastics: An Overview of Sources, Distribution, and Removal Methods”, BSJ Eng. Sci., vol. 8, no. 5, pp. 1659–1673, Sept. 2025, doi: 10.34248/bsengineering.1760593.
ISNAD
Sancak, Şule - Şimşek, Arife - Bakan, Gülfem. “Microplastics: An Overview of Sources, Distribution, and Removal Methods”. Black Sea Journal of Engineering and Science 8/5 (September 1, 2025): 1659-1673. https://doi.org/10.34248/bsengineering.1760593.
JAMA
1.Sancak Ş, Şimşek A, Bakan G. Microplastics: An Overview of Sources, Distribution, and Removal Methods. BSJ Eng. Sci. 2025;8:1659–1673.
MLA
Sancak, Şule, et al. “Microplastics: An Overview of Sources, Distribution, and Removal Methods”. Black Sea Journal of Engineering and Science, vol. 8, no. 5, Sept. 2025, pp. 1659-73, doi:10.34248/bsengineering.1760593.
Vancouver
1.Şule Sancak, Arife Şimşek, Gülfem Bakan. Microplastics: An Overview of Sources, Distribution, and Removal Methods. BSJ Eng. Sci. 2025 Sep. 1;8(5):1659-73. doi:10.34248/bsengineering.1760593

                            24890