The Effect of Jacket Area on The Behaviour of Repaired/Strengthened Reinforced Concrete Columns

Year 2024, Volume: 7 Issue: 5, 928 - 938, 15.09.2024

Yağmur Kopraman , Hüsnü Can

https://doi.org/10.34248/bsengineering.1520275

Abstract

Jacketing is the most popular method for strengthening reinforced concrete columns under axial loading. This repair and strengthening technique is widely used not only in Türkiye but also in other technologically developed countries. In this study, the effectiveness of this method is investigated experimentally, by testing two test parameters which are column section geometry and jacket thickness. The specimens were enlarged on all four sides to understand how the thickness of the jacket layer affects the behavior of the column. Using the experimental data, load versus deformation curves were plotted for each test specimen. The parameters (strength, rigidity, ductility, and energy dissipation capacity) that determine the behaviour of the reinforced column were then analyzed. At the end of this study, the effects of column section geometry and jacket thickness on the jacketing method are discussed, providing valuable preliminary data for future experimental studies.

Keywords

Strengthening, Repair, Jacketing, Axial load, Reinforced concrete, Column

References

• Aksan B. 1988. Jacketed column behaviour under axial load alone. MSc Thesis, Civil Engineering, Middle East Technical University, Ankara, Türkiye, pp: 123.
• Bournas DA, Thanasis CT. 2007. Textile-reinforced mortar versus fiber reinforced polymer confinement in reinforced concrete columns. ACI Struct J, 104(6): 740-748.
• Can H. 1995a. Betonarme kolonların komşu iki yüzden manto ile onarımı ve güçlendirilmesi. TMMO Teknik Derg, 6(1): 51.
• Can H. 1995b. İki, üç ve dört yüzünden mantolanmış kolonların eksenel yük altında davranışı. TMMO Teknik Dergi, 6(4): 38.
• Cısdık M. 1998. Fretli manto ile onarılmış/güçlendirilmiş betonarme kolonların (spiralli ve dairesel etriyeli) eksenel yük altındaki davranışı. Yüksek Lisans Tezi, Gazi Üniversitesi, Ankara, Türkiye, ss: 147.
• Demirel, Y, Can, H, Tankut, T. 1995, Onarılmış betonarme kolon davranışı ve dayanımı. TÜBİTAK, İnşaat Teknolojileri Araştırma Grubu, Proje No. INTAG 512, Ankara, Türkiye, ss: 178.
• Francisco J, Basalo DCY, Matta F, Nanni A. 2012. Fiber reinforced cement-based composite system for concrete confinement. Construct Buil Mater, 32: 55–65.
• Ghoroubi R, Mercimek Ö, Özdemir A, Anil Ö. 2020. Experimental investigation of damaged square short RC columns with low slenderness retrofitted by CFRP strips under axial load. Struct, 28: 170-180.
• Kopraman Y. 2003. Onarılmış ve güçlendirilmiş betonarme kolonlarda manto alanının davranışa etkisi. Yüksek Lisans Tezi, Fen Bilimleri Enstitüsü, Gazi Üniversitesi, Ankara, Türkiye, 170.
• Mercimek O, Anil O, Ghoroubi R, Sakin S, Yilmaz T. 2021. Experimental and numerical investigation of RC column strengthening with CFRP strips subjected to low-velocity impact load. Struct Engin Mechan, 79(6): 749-765.
• Mercimek Ö, Çelik A, Ghoroubi R, Özgür A. 2024. Retrofitting of squat RC column by using TRM strip under axial load. Struct, 60: 105909.
• Mercimek Ö, Ghoroubi R, Anil Ö, Çakmak C, Özdemir A, Kopraman Y. 2023. Strength, ductility, and energy dissipation capacity of RC column strengthened with CFRP strip under axial load. Mechan Based Design Struct Machin, 51(2): 961-979.
• Mercimek Ö, Ghoroubi R, Özdemir A, Anıl Ö, Baran M. 2022. Punching behaviour of two-way RC slabs having different multiple opening locations and sizes strengthened with TRM. Struct, 42: 531-549.
• Mercimek Ö. 2023. Experimental and analytical investigation of the effects of anchor types and strip shapes on shear-deficient reinforced concrete beams strengthened with TRM versus FRP. Inter J Civil Engin, 21(12): 1927-1950.
• Ozbakkaloglu T, Lim JC, Vincent T. 2013. FRP-confined concrete in circular sections: Review and assessment of stress–strain models. Engin Struct, 49: 1068-1088.
• Suleiman R. 1991. Repair and strengthening of reinforced concrete columns. PhD Thesis, Civil Engineering, Middle East Technical University, Ankara, pp: 143.
• Triantafillou T, Thanasis L. 2006. Concrete confinement with textile reinforced mortar jackets. ACI Struct J, 103(1): 28-37.
• Türer A, Mercimek Ö, Anıl Ö, Erbaş Y. 2023. Experimental and numerical investigation of punching behavior of two-way RC slab with different opening locations and sizes strengthened with CFRP strip. Struct, 49: 918-942.
• Ünsal F. 1998. Betonarme kolonların (kare ve fretli) eksenel yük altında fretli manto ile onarımı ve güçlendirilmesi. Yüksek Lisans Tezi, Gazi Üniversitesi, Ankara, Türkiye, pp: 92.
• Yanarateş, M.S. 1990. Use of expandable metals as shear/confinement reinforcement in concrete members, phase 1, axially loaded columns. MSc Thesis, Civil Engineering, Middle East Technical University, Ankara, Türkiye, pp: 73.
• Yumak Y. 1991. Effects of bar development methods on jacketed column behavior. MSc Thesis, Civil Engineering, Middle East Technical University, Ankara, Türkiye, pp: 48.