The gases in the biogas content, which constitute an obstacle to the more effective use of biogas for fuel purposes, are subjected to a number of physical, chemical and biological processes and are removed from the biogas. This is important in order to purify from toxic effects. Many studies have been carried out especially to remove H2S and N2 gases in biogas, which cause corrosion and bad odors.
In this study, different mixtures were determined and biogas was produced. As a result of the measurements, the biogas components of each mixture were measured using the optima gas analyzer device. H2S and N2 ratios obtained from different substrates were determined. The effect of these ratios on biogas production was analyzed. In the research, a laboratory scale application setup was established for biogas production. In this context, 3 different applications were determined and an experimental design was created. In the established application setup, biogas measurements were recorded in the computer environment for 16 days, 30 days and 43 days, taking into account the end of biogas production of the materials. During the measurements, the temperature and pH values were checked periodically and the mixing process was carried out by hand shaking every day. The applications were carried out considering 10% dry matter rate.
Biyogazın yakıt amaçlı kullanımında daha etkin olmasının önünde engel teşkil eden biyogaz içeriğinde bulunan gazlar bir takım fiziksel, kimyasal ve biyolojik işlemlere tabi tutularak biyogaz içerisinden giderimi sağlanmaktadır. Bu toksik etkiden arındırmak adına önemlidir. Özellikle biyogaz içerisinde bulunan ve aşınmaya ve kötü kokulara sebep olan H2S ve N2 gazının uzaklaştırılması amacıyla birçok çalışma yapılmıştır.
Bu çalışmada farklı karışımlar belirlenerek biyogaz üretimi yapılmıştır. Yapılan ölçümler neticesinde optima gaz analizörü cihazı kullanılarak her bir karışımın biyogaz bileşenleri ölçülmüştür. Farklı substratlardan elde edilen H2S ve N2 oranları belirlenmiştir. Elde edilen bu oranların biyogaz üretimine etkisi incelenmiştir. Araştırmada biyogaz üretimini için laboratuvar ölçekli uygulama düzeneği kurulmuştur. Bu kapsamda 3 farklı uygulama belirlenmiş olup bir deneme tasarım oluşturulmuştur. Kurulan uygulama düzeneğinde, materyallerin biyogaz üretimlerinin bitimi dikkate alınarak 16 gün, 30 gün ve 43 gün boyunca biyogaz ölçümleri bilgisayar ortamında kaydedilmiştir. Ölçümler sırasında sıcaklık ve pH değerleri belirli periyotlarda kontrol edilmiş olup ve her gün elle çalkalanarak karıştırma işlemi yapılmıştır. Uygulamalar %10 kuru madde oranı dikkate alınarak gerçekleştirilmiştir.
Primary Language | English |
---|---|
Subjects | Agricultural Energy Systems |
Journal Section | Research Articles |
Authors | |
Publication Date | |
Submission Date | November 30, 2024 |
Acceptance Date | January 6, 2025 |
Published in Issue | Year 2025 Volume: 8 Issue: 2 |