Investigation of Fracture Formation During Bending of 5xxx Series Aluminum Alloys

Mehmet Okan Görtan; Mehmet Ali Çiftçi

Investigation of Fracture Formation During Bending of 5xxx Series Aluminum Alloys

Abstract

Aluminum alloys are frequently used in the defense industry thanks to their lightweight and comparatively high strength. In the current study, bending and fracture formation characteristics of EN AW 5083-H321 aluminum sheets are investigated using bending tests and finite element analysis. Bending tests are conducted using three different thicknesses in sheet metals, namely 3 mm, 4 mm, and 6 mm. Furthermore, five different bending radii is combined with those thicknesses. Limiting bending radius to thickness ratios are determined using experiments. Those experiments are modeled using finite element analysis. Consequently, fracture parameters of the investigated material are defined to be able to accurately model the process. Therefore, a valuable tool has been developed to aid designers in future applications.

Keywords

Supporting Institution

TÜBİTAK

Project Number

217M962

Thanks

Authors of this work thank to Scientific and Technological Research Council of Turkey for financial support under the project 217M962.

References

M. Kolar, K.O. Pedersen, S. Gulbrandsen-Dahl, K. Marthinsen, “Combined effect of deformation and artificial aging on mechanical properties of Al-Mg-Si alloy,” Trans. Nonferrous Met. Soc. China, vol. 22, pp. 1824-1830, Aug. 2012, doi: 10.1016/S1003-6326(11)61393-9.
A. Cuniberti, A. Tolley, M.V. Castro Riglos, R. Giovachini, “Influence of natural aging on the precipitation hardening of an AlMgSi alloy,” Mater. Sci. Eng. A, vol. 527, pp. 5307-5311, Jul. 2010, doi:10.1016/j.msea.2010.05.003.
H. Demir, S. Gündüz, “The effect of aging on machinability of 6061 aluminum alloy,” Mater. Des., vol. 30, pp. 14801483, May 2009, doi: 10.1016/j.matdes.2008.08.007.
W. F. Hosford, R. M. Caddell, “Metal Forming Mechanics and Metallurgy”. Cambridge University Press, 3rd edition, 2007.
Standard Test Methods for Tension Testing of Metallic Materials, ASTM E8/E8M-22, 2024.
H. Kim, S. Chatti, N. Kardes, “Bending, Flanging, and Hemming” in Sheet Metal Forming: Processes and Applications, T. Altan, A.E. Tekkaya, Eds. Materials Park, Ohio, USA, ASM International, 2012, pp. 19-49.
Y. Huang, H. B. Wang, and F. Guo, “The improved Irwin’s model for crack problems in power-law hardening materials,” Int. J. Appl. Mech., May 2023, doi: 10.1142/s1758825123500643.
X. R. Chu, L. Leotoing, D. Guines, and J. Gao, “Comparison of Constitutive Laws on the Modeling of Thermo Viscoplastic Behaviour of an Aluminum Alloy,” J. Appl. Mech. Mater., pp. 307–310, Jan. 2014, doi: 10.4028/www.scientific.net/amm.496-500.307.

J. P. Pascon, M. A. S. Torres, and C. A. R. P. Baptista, “Numerical model for the stress field ahead of a crack in elastoplastic regime,” Procedia Struct. Integr., vol. 17, pp. 411–418, Jan. 2019, doi: 10.1016/J.PROSTR.2019.08.054.
H. Palaniswamy, ‘’Plastic Deformation – State of Stress, Yield Criteria Flow Rule, and Hardening Rules,” in Sheet Metal Forming: Fundamentals, T. Altan, A.E. Tekkaya, Eds. Materials Park, Ohio, USA, ASM International, 2012, pp. 5372.
K. Anoukou, F. Pastor, P. Dufrenoy, and D. Kondo, “Limit analysis and homogenization of porous materials with Mohr–Coulomb matrix. Part I: Theoretical formulation,” J. Mech. Phys. Solids, vol. 91, pp. 145–171, Jun. 2016, doi: 10.1016/J.JMPS.2016.01.018.
N. Kugalur-Palanisamy, E. Rivière-Lorphèvre, P.-J. Arrazola, and F. Ducobu, “Comparison of Johnson-Cook and modified Johnson-Cook material constitutive models and their influence on finite element modelling of Ti6Al4V orthogonal cutting process,” AIP Conference Proceedings, vol. 2113, no.1, p. 080009, Jul. 2019, doi: 10.1063/1.5112617.
P. G. Kossakowski, “Prediction of Ductile Fracture for S235JR Steel Using the Stress Modified Critical Strain and Gurson-Tvergaard-Needleman Models,” J. Mater. Civ. Eng., vol. 24, no. 12, pp. 1492–1500, Dec. 2012, doi: 10.1061/(ASCE)MT.1943-5533.0000546.
Lyamina, E., Alexandrov, S., Jeng, Y.-R., & Hwang, Y. M., “Modelling of Damage Evolution in the Vicinity of Frictional Metal Forming,”Adv. Mater. Res., Vol. 579, pp. 124–133, Oct. 2012, doi: 10.4028/WWW.SCIENTIFIC.NET/AMR.579.124.
J. K. Holmen, L. E. B. Dæhli, O. S. Hopperstad, and T. Børvik, “Prediction of ductile failure using a phenomenological model calibrated from micromechanical simulations,” Procedia Struct. Integr., vol. 2, pp. 2543–2549, Dec. 2016, doi:10.1016/j.prostr.2016.06.318.
S. Alexandrov and D. Vilotic, “A theoretical—experimental method for the identification of the modified Cockroft—Latham ductile fracture criterion,” P. I. Mech. Eng. C-J Mec., vol. 222, no. 9, pp. 1869–1872, Sep. 2008, doi: 10.1243/09544062JMES1055.
Aluminium and Aluminium Alloys – Chemical Composition and Form of Wrought Products, DIN EN 573-3, 2022.
Aluminium and Aluminium Alloys – Sheet, Strip and Plate, DIN EN 00485-2, 2007.

Details

Primary Language

English

Subjects

Numerical Methods in Mechanical Engineering

Journal Section

Research Article

Authors

Mehmet Okan Görtan ^*
0000-0002-6095-1161
Türkiye

Mehmet Ali Çiftçi
0000-0002-1286-3407
Türkiye

Publication Date

May 1, 2025

Submission Date

April 16, 2025

Acceptance Date

April 27, 2025

Published in Issue

Year 2025 Volume: 22 Number: 1

IZ

https://izlik.org/JA72NF67BY

Cite

RIS / Bibtex

APA

Görtan, M. O., & Çiftçi, M. A. (2025). Investigation of Fracture Formation During Bending of 5xxx Series Aluminum Alloys. Cankaya University Journal of Science and Engineering, 22(1), 42-49. https://izlik.org/JA72NF67BY

AMA

1.Görtan MO, Çiftçi MA. Investigation of Fracture Formation During Bending of 5xxx Series Aluminum Alloys. CUJSE. 2025;22(1):42-49. https://izlik.org/JA72NF67BY

Chicago

Görtan, Mehmet Okan, and Mehmet Ali Çiftçi. 2025. “Investigation of Fracture Formation During Bending of 5xxx Series Aluminum Alloys”. Cankaya University Journal of Science and Engineering 22 (1): 42-49. https://izlik.org/JA72NF67BY.

EndNote

Görtan MO, Çiftçi MA (May 1, 2025) Investigation of Fracture Formation During Bending of 5xxx Series Aluminum Alloys. Cankaya University Journal of Science and Engineering 22 1 42–49.

IEEE

[1]M. O. Görtan and M. A. Çiftçi, “Investigation of Fracture Formation During Bending of 5xxx Series Aluminum Alloys”, CUJSE, vol. 22, no. 1, pp. 42–49, May 2025, [Online]. Available: https://izlik.org/JA72NF67BY

ISNAD

Görtan, Mehmet Okan - Çiftçi, Mehmet Ali. “Investigation of Fracture Formation During Bending of 5xxx Series Aluminum Alloys”. Cankaya University Journal of Science and Engineering 22/1 (May 1, 2025): 42-49. https://izlik.org/JA72NF67BY.

JAMA

1.Görtan MO, Çiftçi MA. Investigation of Fracture Formation During Bending of 5xxx Series Aluminum Alloys. CUJSE. 2025;22:42–49.

MLA

Görtan, Mehmet Okan, and Mehmet Ali Çiftçi. “Investigation of Fracture Formation During Bending of 5xxx Series Aluminum Alloys”. Cankaya University Journal of Science and Engineering, vol. 22, no. 1, May 2025, pp. 42-49, https://izlik.org/JA72NF67BY.

Vancouver

1.Mehmet Okan Görtan, Mehmet Ali Çiftçi. Investigation of Fracture Formation During Bending of 5xxx Series Aluminum Alloys. CUJSE [Internet]. 2025 May 1;22(1):42-9. Available from: https://izlik.org/JA72NF67BY