Dental İmplant Materyallerin İyon İmplantasyon Yöntemiyle Modi-fikasyonlarının İn Vitro Hücre Tutunmasına Etkisi
Abstract
Dental İmplant Materyallerin İyon İmplantasyon Yöntemiyle Modifikasyonlarının İn Vitro Hücre Tutunmasına Etkisi
Bir dental implant tedavisinin başarısında cerrahi teknik, implant materyali ve implant dizaynı gibi faktörlerin yanı sıra, implant materyalinin yüzey özelliklerinin de önemli olduğu bilinmektedir. Son yıllarda yapılan çalışmalar iyon implantasyonunun dental implantların yüzey modifikasyonu açısından iyi bir aday olduğunu göstermiştir._Bu çalışmada, MEVVA iyon implantasyon teknolojisi kullanılarak, metal+gaz hibrit iyon implantasyonu yapılmış yüzeylerin osteoblast hücre tutunmasına etkisi incelenmiştir. Bu amaçla, iyon implante edilecek materyal olarak son yıllarda dental implant materyali olarak en çok kullanılan titanyum (ISO 5832-2 Grade 4) seçilmiştir. Titanyum yüzeylere implante edilecek metal element olarak yüksek biyouyumluluğu ile bilinen zirkonyum ve zirkonyum ile eş zamanlı implante edilen gaz elementi olarakta titanyum yüzeylerin pasivasyonunu arttırmak için oksijen kullanılmıştır. Osteoblast hücre tutunmaları in vitro ortamda gerçekleştirilerek yüzey pürüzlülüğünün ve iyon implantasyon işleminin osteoblast hücre tutunmaları üzerine etkisi karşılaştırılmalı olarak incelenmiştir. Sonuç olarak pürüzlü ve iyon implante edilmiş yüzeylerde hücrelerin daha iyi tutunduğu görülmüştür.
The effects of Ion Implantation technique on dental implant materials for in vitro cell attachment
Achivement of a dental implant treatment depend on also surface properties of implant material as well as surgical method, implant material and implant desing, Studies have shown that ion implantation is a good candidate for modifying of dental implant surface._In this thesis, it was observed the effects on osteoblast attachment on modified surfaces with metal+gas hybrid ion implantation by using MEVVA ion implantation technology. For this aim, the material for ion implantation was chosen as titanium (ISO 5832-2 Grade 4) which is the most common material used in dentistry. Zirconium element known as biocompatible and oxygen to increase the passivation of titanium surfaces were used for creating ions simultaneously._ Attachment of osteoblast on samples was investigated in vitro for comparing the effects of the rougnesses and ion implantation surface modification on attachment of osteoblast. It is observed at the end of the in vitro osteoblast cell attachment is better on rough and ion implanted surfaces.
Keywords
Details
Primary Language
TR
Subjects
-
Journal Section
-
Authors
Ali Turanlı
This is me
Emel Sokullu
This is me
Alexey Nikolayev
This is me
Taner Dağcı
This is me
Ahmet Öztarhan
This is me
Publication Date
August 29, 2016
Submission Date
August 29, 2016
Acceptance Date
-
Published in Issue
Year 2016 Volume: 12 Number: 2
Cited By
Prolonged Biomolecule Release from Titanium Surfaces via Titania Nanotube Arrays
Celal Bayar Üniversitesi Fen Bilimleri Dergisi
https://doi.org/10.18466/cbayarfbe.972316