Research Article
Year 2017,
Volume: 13 Issue: 3
,
643
-
645
,
30.09.2017
Abstract
References
- 1. Jiang, S.P, Development of lanthanum strontium manganite perovskite cathode materials of solid oxide fuel cells: a review, Journal of Material Science, 2008, 43(21), 6799–6833,
- 2. Hung, M.H, Madhava Rao, M.V, Tsai, D.S, Microstructures andelectrical properties of calcium substituted LaFeO3 as SOFC cathode, Materials Chemistry and Physics, 2007, 101, 297–302.
- 3. Torun Özlü, H, Çakar, S, Ersoy, E, Türkoğlu, O, The bulk electrical contuctivity properties of d-Bi2O3 solid electrolyte system doped with Yb2O3, Journal of Thermal Analysis and Calori-metry, 2015, 122, 525-536.
- 4. Özlü, H, Ersoy, E, Çakar, S, Türkoğlu, O, The Preparation and Characterization of LaNi1-xFexO3 Perovskite Thin Film as a Cat-hode Electrode for Solid Oxide Fuel Cell Applications. 2nd Interna-tional Conference on Nuclear and Renewable Energy Resources, 2010.
- 5. Efimov, K, Klande, T, Juditzki, N, Feldhoff, A, Ca-containing CO2- tolerant perovskite materials for oxygen separation, Journal of Membrane Science, 2012, 389, 205–215.
- 6. Manasa, K.R, Lee, K, Investigation of aliovalent transition metal doped La0.7Ca0.3Cr0.8X0.2O3δ (x=Ti, Mn, Fe, Co, and Ni) as electrode materials for symmetric solid oxide fuel cells, Ceramics International, 2015, 41, 10878–10890.
- 7. Gu, H, Chen, H, Gao, L, Zheng, Y, Zhu, X, Guo, L, Effect of Co doping on the properties of Sr0.8Ce0.2MnO3−δ cathode for inter-mediate-temperature solid-oxide fuel cells, International Journal of Hydrogen Energy, 2008, 33(17), 4681–4688.
The Preparation and Characterization of LSCF and LCCF Perovskite Cathode Electrode for Solid Oxide Fuel Cell Applications
Abstract
In this paper, LaSrCoFe
and LaCaCoFe powders compositions were prepared with the solid state reaction.
The crystal structure of powders perovskite possess hexagonal type crystal
lattice according to the literature survey. Crystallographic and micro
structural properties of the produced powder were characterized by XRD. Lattice parameter for LSCF a=5.471 Å,c=13.47
Å and for LCCF a=5.435 Å, c=13.23 Å. Cathode electrode which is small crystal
particle was formed into a thin film. The conductivity of the thin film LSCF was
measured by four probe conductive.
References
- 1. Jiang, S.P, Development of lanthanum strontium manganite perovskite cathode materials of solid oxide fuel cells: a review, Journal of Material Science, 2008, 43(21), 6799–6833,
- 2. Hung, M.H, Madhava Rao, M.V, Tsai, D.S, Microstructures andelectrical properties of calcium substituted LaFeO3 as SOFC cathode, Materials Chemistry and Physics, 2007, 101, 297–302.
- 3. Torun Özlü, H, Çakar, S, Ersoy, E, Türkoğlu, O, The bulk electrical contuctivity properties of d-Bi2O3 solid electrolyte system doped with Yb2O3, Journal of Thermal Analysis and Calori-metry, 2015, 122, 525-536.
- 4. Özlü, H, Ersoy, E, Çakar, S, Türkoğlu, O, The Preparation and Characterization of LaNi1-xFexO3 Perovskite Thin Film as a Cat-hode Electrode for Solid Oxide Fuel Cell Applications. 2nd Interna-tional Conference on Nuclear and Renewable Energy Resources, 2010.
- 5. Efimov, K, Klande, T, Juditzki, N, Feldhoff, A, Ca-containing CO2- tolerant perovskite materials for oxygen separation, Journal of Membrane Science, 2012, 389, 205–215.
- 6. Manasa, K.R, Lee, K, Investigation of aliovalent transition metal doped La0.7Ca0.3Cr0.8X0.2O3δ (x=Ti, Mn, Fe, Co, and Ni) as electrode materials for symmetric solid oxide fuel cells, Ceramics International, 2015, 41, 10878–10890.
- 7. Gu, H, Chen, H, Gao, L, Zheng, Y, Zhu, X, Guo, L, Effect of Co doping on the properties of Sr0.8Ce0.2MnO3−δ cathode for inter-mediate-temperature solid-oxide fuel cells, International Journal of Hydrogen Energy, 2008, 33(17), 4681–4688.
There are 7 citations in total.
Details
| Journal Section | Research Article |
|---|---|
| Authors | |
| Publication Date | September 30, 2017 |
| DOI | https://doi.org/10.18466/cbayarfbe.339320 |
| IZ | https://izlik.org/JA23MW29RJ |
| Published in Issue | Year 2017 Volume: 13 Issue: 3 |