Regenerative Braking of Hub Type Brushless Direct Current Machine Used on Electric Bicycle

Year 2021, Volume: 17 Issue: 4, 437 - 445, 29.12.2021

Kağan Candan Hayati Mamur

Abstract

Electric motors are more efficient than internal combustion engines. This puts forward electric vehicles more popular than fossil fuel vehicles. However, electric vehicles have limited range because of insufficient batteries. For this reason, studies focus on increasing the range of electric vehicles. Regenerative braking is a solution that helps this problem. It utilizes kinetic energy of rotating wheels during braking and converts kinetic energy into the electric energy via induced voltage on the motor phases. In this study, a new regenerative braking modeling and application was performed under different speeds for a hub type brushless direct current machine (BLDC) used on electric bicycle. The modeling results were compared with the application results and they verified each other. The analyses have showed that gain and efficiency which attain from the regenerative braking increased at higher speeds of hub type BLDC. Ultimately, the energy recovery of 6.37% was saved by means of the regenerative braking of the hub type BLDC used on electric bicycle at 320 RPM.

Keywords

Regenerative braking, hub BLDC, electric bicycle, electric vehicle, energy saving

Supporting Institution

Research Project Coordination Unit of The Manisa Celal Bayar University

Project Number

2019-003

Thanks

This work was supported by Research Project Coordination Unit of The Manisa Celal Bayar University (Project Number: 2019-003).

References

• Long, B., Lim, S. T., Ryu, J. H., & Chong, K. T. (2014). Energy-regenerative braking control of electric vehicles using three-phase brushless direct-current motors. Energies, 7(1), 99-114.
• Hua, C. C., Kao, S. J., & Fang, Y. H. (2013, November). Design and implementation of a regenerative braking system for electric bicycles with a DSP controller. In 2013 1st International Future Energy Electronics Conference (IFEEC) (pp. 641-645). IEEE.
• Yang, M. J., Jhou, H. L., Ma, B. Y., & Shyu, K. K. (2009). A cost-effective method of electric brake with energy regeneration for electric vehicles. IEEE Transactions on Industrial Electronics, 56(6), 2203-2212.
• Naseri, F., Farjah, E., & Ghanbari, T. (2016). An efficient regenerative braking system based on battery/supercapacitor for electric, hybrid, and plug-in hybrid electric vehicles with BLDC motor. IEEE Transactions on Vehicular Technology, 66(5), 3724-3738.
• Pan, C., Chen, L., Chen, L., Jiang, H., Li, Z., & Wang, S. (2016). Research on motor rotational speed measurement in regenerative braking system of electric vehicle. Mechanical Systems and Signal Processing, 66, 829-839.
• Godfrey, A. J., & Sankaranarayanan, V. (2018). A new electric braking system with energy regeneration for a BLDC motor driven electric vehicle. Engineering Science and Technology, an International Journal, 21(4), 704-713.
• Nian, X., Peng, F., & Zhang, H. (2014). Regenerative braking system of electric vehicle driven by brushless DC motor. IEEE Transactions on Industrial Electronics, 61(10), 5798-5808.
• Guo, J., Wang, J., & Cao, B. (2009, June). Regenerative braking strategy for electric vehicles. In 2009 IEEE Intelligent Vehicles Symposium (pp. 864-868). IEEE.
• Nashit, S., Adhikari, S., Farhan, S., Avinash, S., & Gambhire, A. (2016). Design, fabrication and testing of regenerative braking test rig for BLDC motor. Int. Res. J. Eng. Technol, 3(05), 1881-1884.
• Sindhuja, V., & Ranjitham, G. (2014). Regenerative Braking System of Electric Vehicle Driven By BLDC Motor Using Neuro Fuzzy and PID. International Journal of Innovative Research in Science, Engineering and Technology, 3(12), 17847-17854.
• Kivanc, O. C., Ustun, O., Tosun, G., & Tuncay, R. N. (2016, October). On regenerative braking capability of BLDC motor. In IECON 2016-42nd Annual Conference of the IEEE Industrial Electronics Society (pp. 1710-1715). IEEE.
• Bobba, P. B., & Rajagopal, K. R. (2010, December). Compact regenerative braking scheme for a PM BLDC motor driven electric two-wheeler. In 2010 Joint International Conference on Power Electronics, Drives and Energy Systems & 2010 Power India (pp. 1-5). IEEE.
• Cody, J., Göl, Ö., Nedic, Z., Nafalski, A., & Mohtar, A. (2009). Regenerative braking in an electric vehicle (Doctoral dissertation, Branzowy Osrodek Badawczo-Rozwojowy Maszyn Elektrycznych" Komel").
• Geraee, S., Mohammadbagherpoor, H., Shafiei, M., Valizadeh, M., Montazeri, F., & Feyzi, M. R. (2018). Regenerative braking of electric vehicle using a modified direct torque control and adaptive control theory. Computers & Electrical Engineering, 69, 85-97.
• Elavarasi, R., & SenthilKumar, P. K. (2014). An FPGA based regenerative braking system of electric vehicle driven by BLDC motor. Indian Journal of Science and Technology, 7(S7), 1-5.
• Wu, H. X., Cheng, S. K., & Cui, S. M. (2005). A controller of brushless DC motor for electric vehicle. IEEE Transactions on magnetics, 41(1), 509-513.
• Rakesh, M., & Narasimham, P. V. R. L. (2012). Different braking techniques employed to a brushless DC motor drive used in locomotives. International Electrical Engineering Journal, 3(2), 784-790.
• Karabacak, Y., & Uysal, A. (2017, September). Fuzzy logic controlled brushless direct current motor drive design and application for regenerative braking. In 2017 International Artificial Intelligence and Data Processing Symposium (IDAP) (pp. 1-7). IEEE.
• 1Mamur, H., & Çoban, Y. (2020). Detailed modeling of a thermoelectric generator for maximum power point tracking. Turkish Journal of Electrical Engineering & Computer Sciences, 28, 124-139.