Evaluation Of The Reliability And Reproducibility Of Bolton Ratios Using Intraoral Scanner, Model Scanner, And Plaster Models

Year 2025, Volume: 49 Issue: 2, 71 - 80, 28.08.2025

Irmak Ocak , Gediz Aksöz , Hande Görücü Coşkuner , Ezgi Atik , Bengisu Akarsu Güven , Cenk Ahmet Akcan , Tülin Taner

Abstract

Background: Advances in digital technologies have enabled multiple methods for measuring tooth size ratios; therefore, this study compared the reliability of manual, intraoral scanner, and model scanner techniques in determining anterior and overall Bolton ratios.
Materials and Methods: Thirty-six female subjects aged 18–25 years were included. Plaster models were obtained using silicone impressions for manual measurements. Intraoral digital models were created with an intraoral scanner, and additional digital models were produced by scanning plaster casts with a model scanner. Anterior and overall Bolton ratios were measured on all three model types by two observers. Intra- and inter-observer reliability were assessed using intraclass correlation coefficients (ICCs). Bland–Altman analyses evaluated systematic and random errors, and repeated measures ANOVA tested differences between measurement methods.
Results: Intra-observer reliability was highest for manual anterior measurements (ICC=0.914), followed by the model scanner (ICC=0.867), with intraoral scans showing lower consistency (ICC=0.826). Inter-observer agreement was lower across all methods, especially for intraoral scans. Bland–Altman analysis revealed the largest bias and widest limits of agreement in intraoral anterior measurements. Anterior Bolton ratios differed significantly between methods (p<0.001), with intraoral scans overestimating by 5–7 percentage points; overall Bolton ratios did not differ significantly (p=0.601).
Conclusions: Manual and model scanner measurements provided comparable, reliable results for anterior Bolton analysis, whereas intraoral scanning showed greater variability and overestimation. For accurate assessment of anterior tooth size discrepancies, manual or model-based methods are preferable. Overall Bolton ratios can be reliably evaluated with any of the three methods.

Keywords

Bolton ratio , intraoral scanner , model scanner , plaster model

Ethical Statement

The study protocol was approved by the Clinical Research Ethics Committee of Hacettepe University (Approval No: KA-22051).

Supporting Institution

This study was supported by the Hacettepe University Scientific Research Projects Coordination Unit (Project number TAY-2023-20694).

References

• 1. Bolton WA. Disharmony in tooth size and its relation to the analysis and treatment of malocclusion. Angle Orthod 1958; 28: 113–130.
• 2. Fleming PS, Marinho V, Johal A. Orthodontic measurements on digital study models compared with plaster models: a systematic review. Orthod Craniofac Res 2011; 14: 1–16.
• 3. Hassan WNW, Othman SA, Chan CS, Ahmad R, Ali SNA, Abd Rohim A. Assessing agreement in measurements of orthodontic study models: digital caliper on plaster models vs 3-dimensional software on models scanned by structured-light scanner. Am J Orthod Dentofacial Orthop 2016; 150: 886–895.
• 4. Lang FA, Lang NA, Vorloeper J, Niederau C, Craveiro RB, Knaup I et al. Validation of a digital, partly automated three-dimensional cast analysis for evaluation of orthodontic treatment assessment. Head Face Med 2025; 21: 1–14.
• 5. Sousa MV, Vasconcelos EC, Janson G, Garib D, Pinzan A. Accuracy and reproducibility of 3-dimensional digital model measurements. Am J Orthod Dentofacial Orthop 2012; 142: 269–273.
• 6. Quimby ML, Vig KW, Rashid RG, Firestone AR. The accuracy and reliability of measurements made on computer-based digital models. Angle Orthod 2004; 74: 298–303.
• 7. Kumar AA, Ananthakrishnan MG, Kumar S, Divakar G, Sekar S, Dharani S. Assessing the validity and reliability of tooth widths and Bolton ratios obtained from digital models and plaster models. J Pharm Bioall Sci 2022; 14(Suppl 1): 148–151.
• 8. San José V, Bellot-Arcís C, Tarazona B, Zamora N, Lagravère MO, Paredes-Gallardo V. Dental measurements and Bolton index reliability and accuracy obtained from 2D digital, 3D segmented CBCT, and 3D intraoral laser scanner. J Clin Exp Dent. 2017 ;9: 1466–1471.
• 9. Wiranto MG, Engelbrecht WP, Nolthenius HET, van der Meer WJ, Ren Y. Validity, reliability, and reproducibility of linear measurements on digital models obtained from intraoral and cone-beam computed tomography scans of alginate impressions. Am J Orthod Dentofacial Orthop 2013; 143: 140–147.
• 10. Amuk NG, Karsli E, Kurt G. Comparison of dental measurements between conventional plaster models, digital models obtained by impression scanning and plaster model scanning. Int Orthod 2019; 17: 151–158.
• 11. Kim J, Lagravère MO. Accuracy of Bolton analysis measured in laser scanned digital models compared with plaster models (gold standard) and cone-beam computed tomography images. Korean J Orthod 2016; 46: 13–19.
• 12. Koretsi V, Tingelhoff L, Proff P, Kirschneck C. Intra-observer reliability and agreement of manual and digital orthodontic model analysis. Eur J Orthod 2018; 40: 52–57.
• 13. Rafiei E, Haerian A, Fadaei Tehrani P, Shokrollahi M. Agreement of in vitro orthodontic measurements on dental plaster casts and digital models using Maestro 3D Ortho Studio software. Clin Exp Dent Res 2022; 8: 1149–1157.
• 14. Camardella LT, Breuning H, de Vasconcellos Vilella O. Accuracy and reproducibility of measurements on plaster models and digital models created using an intraoral scanner. J Orofac Orthop 2017; 78: 211–220.
• 15. Koo TK, Li MY. A guideline of selecting and reporting intraclass correlation coefficients for reliability research. J Chiropr Med 2016; 15: 155–163.
• 16. Lavelle CLB. Maxillary and mandibular tooth size in different racial groups and in different occlusal categories. Am J Orthod 1972; 61: 29–37.
• 17. Smith SS, Buschang PH, Watanabe E. Interarch tooth-size relationships of three populations: does Bolton’s analysis apply? Am J Orthod Dentofacial Orthop 2000; 117: 169–174.
• 18. Al-Tamimi T, Hashim HA. Bolton tooth-size ratio revisited. World J Orthod 2005; 6: 289–295.
• 19. Othman SA, Harradine NWT. Tooth-size discrepancy and Bolton’s ratios: a literature review. J Orthod 2006; 33: 45–51.
• 20. Oktay H, Ulukaya E. Intermaxillary tooth size discrepancies among different malocclusion groups. Eur J Orthod 2010; 32: 307– 312.
• 21. Pant R, Juszczyk AS, Clark RK, Radford DR. Long-term dimensional stability and reproduction of surface detail of four polyvinyl siloxane duplicating materials. J Dent 2008; 36: 456–461.
• 22. Levartovsky S, Zalis M, Pilo R, Harel N, Ganor Y, Brosh T. The effect of one-step vs two-step impression techniques on longterm accuracy and dimensional stability when the finish line is within the gingival sulcular area. J Prosthodont 2014; 23: 124–133.
• 23. Martin MA, Lipani E, Martinez LB, Lorenzo AA, Aiuto R, Garcovich D. Reliability of tooth width measurements delivered by the ClinCheck Pro 6.0 software on digital casts: a cross-sectional study. Int J Environ Res Public Health 2022; 19: 3581.
• 24. Zilberman O, Huggare J, Parikakis KA. Evaluation of the validity of tooth size and arch width measurements using conventional and three-dimensional virtual orthodontic models. Angle Orthod 2003; 73: 301–306.
• 25. Teixeira Santana T, Copello F, Marañón-Vásquez GA, Nojima LI, Sant’Anna EF. Diagnostic performance of ClinCheck, Dolphin Imaging, and 3D Slicer software for Bolton discrepancy analysis. Angle Orthod 2025; 95: 51–56.
• 26. Shailendran A, Weir T, Freer E, Kerr B. Accuracy and reliability of tooth widths and Bolton ratios measured by ClinCheck Pro. Am J Orthod Dentofacial Orthop 2022; 161: 65–73.
• 27. Flügge TV, Schlager S, Nelson K, Nahles S, Metzger MC. Precision of intraoral digital dental impressions with iTero and extraoral digitization with the iTero and a model scanner. Am J Orthod Dentofacial Orthop 2013; 144: 471–478.
• 28. Krieger E, Seiferth J, Marinello I, Jung BA, Wriedt S, Jacobs C et al. Invisalign treatment in the anterior region: were the predicted tooth movements achieved? J Orofac Orthop 2012; 73: 365–376.
• 29. Stevens DR, Flores-Mir C, Nebbe B, Raboud DW, Heo G, Major PW. Validity, reliability, and reproducibility of plaster vs digital study models: comparison of peer assessment rating and Bolton analysis and their constituent measurements. Am J Orthod Dentofacial Orthop 2006; 129: 794–803.
• 30. Moreira DD, Gribel BF, Torres GDR, Vasconcelos KF, Freitas DQD, Ambrosano GMB. Reliability of measurements on virtual models obtained from scanning of impressions and conventional plaster models. Braz J Oral Sci 2014; 13: 297–302.
• 31. Abizadeh N, Moles DR, O’Neill J, Noar JH. Digital versus plaster study models: how accurate and reproducible are they? J Orthod 2012; 39: 151–159.
• 32. Park SH, Byun SH, Oh SH, Lee HL, Kim JW, Yang BE et al. Evaluation of the reliability, reproducibility, and validity of digital orthodontic measurements based on various digital models among young patients. J Clin Med 2020; 9: 2728.
• 33. Alvarado-Lorenzo A, Antonio-Zancajo L, Curto A, Garcovich D, Criado-Pérez L. Reproducibility and reliability of dental arch measurements: comparison of manual, digital, and app-based methods. BMC Oral Health 2024; 24: 1568.
• 34. Yılmaz H, Özlü FÇ, Karadeniz C, Karadeniz Eİ. Efficiency and accuracy of three-dimensional models versus dental casts: a clinical study. Turk J Orthod 2019; 32: 214–220.
• 35. Mullen SR, Martin CA, Ngan P, Gladwin M. Accuracy of space analysis with eModels and plaster models.