Cationic Polymerization of a-Methyl Styrene Catalysed by Sulphunc Acid

E. Özdemir

doi:10.1501/Commub_0000000099

EN

Cationic Polymerization of a-Methyl Styrene Catalysed by Sulphunc Acid

Abstract

Cationic Polymerization of a- methylstyrene was carried out in chloroform by using H2SO4 as catalyst. The effect of temperature, monomer and catalyst concentrations were studied. The dependence of the initial rates on the initial monomer [M]o and catalyst [C]o concentrations is - d [M] /dt = k [M] 0 [C] o for chloroform solution. On the other hand, rate of polymerization increases to a certain temperature and then decreases. It was found that molecular weight of the polymers increases with the monomer con- centration and temperature, but it isn’t dependent on the catalyst concentration.

Keywords

References

Communications Faculty of Sciences University of Ankara Series B Chemistry and Chemical Engineering

Details

Primary Language

English

Subjects

Chemical Engineering

Journal Section

Research Article

Authors

E. Özdemir This is me
Türkiye

Publication Date

January 1, 1983

Submission Date

January 1, 1983

Acceptance Date

-

Published in Issue

Year 1983 Volume: 29

DOI

https://doi.org/10.1501/Commub_0000000099

IZ

https://izlik.org/JA23HC86PS

Cite

RIS / Bibtex

APA

Özdemir, E. (1983). Cationic Polymerization of a-Methyl Styrene Catalysed by Sulphunc Acid. Communications Faculty of Sciences University of Ankara Series B Chemistry and Chemical Engineering, 29. https://doi.org/10.1501/Commub_0000000099

AMA

1.Özdemir E. Cationic Polymerization of a-Methyl Styrene Catalysed by Sulphunc Acid. Commun. Fac. Sci. Univ. Ank. Ser. B. 1983;29. doi:10.1501/Commub_0000000099

Chicago

Özdemir, E. 1983. “Cationic Polymerization of A-Methyl Styrene Catalysed by Sulphunc Acid”. Communications Faculty of Sciences University of Ankara Series B Chemistry and Chemical Engineering 29 (January). https://doi.org/10.1501/Commub_0000000099.

EndNote

Özdemir E (January 1, 1983) Cationic Polymerization of a-Methyl Styrene Catalysed by Sulphunc Acid. Communications Faculty of Sciences University of Ankara Series B Chemistry and Chemical Engineering 29

IEEE

[1]E. Özdemir, “Cationic Polymerization of a-Methyl Styrene Catalysed by Sulphunc Acid”, Commun. Fac. Sci. Univ. Ank. Ser. B, vol. 29, Jan. 1983, doi: 10.1501/Commub_0000000099.

ISNAD

Özdemir, E. “Cationic Polymerization of A-Methyl Styrene Catalysed by Sulphunc Acid”. Communications Faculty of Sciences University of Ankara Series B Chemistry and Chemical Engineering 29 (January 1, 1983). https://doi.org/10.1501/Commub_0000000099.

JAMA

1.Özdemir E. Cationic Polymerization of a-Methyl Styrene Catalysed by Sulphunc Acid. Commun. Fac. Sci. Univ. Ank. Ser. B. 1983;29. doi:10.1501/Commub_0000000099.

MLA

Özdemir, E. “Cationic Polymerization of A-Methyl Styrene Catalysed by Sulphunc Acid”. Communications Faculty of Sciences University of Ankara Series B Chemistry and Chemical Engineering, vol. 29, Jan. 1983, doi:10.1501/Commub_0000000099.

Vancouver

1.E. Özdemir. Cationic Polymerization of a-Methyl Styrene Catalysed by Sulphunc Acid. Commun. Fac. Sci. Univ. Ank. Ser. B. 1983 Jan. 1;29. doi:10.1501/Commub_0000000099