Research Article

THE CORROSİON BEHAVIOUR OF LEAD IN SODIUM HYDROXIDE SOLUTIONS CONTAINING MOLYBDATE IONS

Volume: 39 January 1, 1993
  • A. A Mısbah
EN

THE CORROSİON BEHAVIOUR OF LEAD IN SODIUM HYDROXIDE SOLUTIONS CONTAINING MOLYBDATE IONS

Abstract

The corrosion rate and potential of lead were measured in 0.2—2M NaOH Solutions con- taining 10“4-5 x 10_,M Na2MoO4. Results showed that the corrosion rate and potential dccrease with increase of molyhdate concentration. This indîcated the deceleration of the cathodic reaction. Anodic polarisation showed that the increase of MoO4“2 concentration delays the onset of passivity. Cathodic polarisation curves were also measured; the results confirmed the deceleration of the cathodic reaction with increase of molyhdate concentration.

Keywords

References

  1. THE CORROSİON BEHAVIOUR OF LEAD IN SODIUM HYDROXIDE SOLUTIONS CONTAINING MOLYBDATE IONS

Details

Primary Language

English

Subjects

Chemical Engineering

Journal Section

Research Article

Authors

A. A Mısbah This is me
Türkiye

Publication Date

January 1, 1993

Submission Date

January 1, 1992

Acceptance Date

-

Published in Issue

Year 1970 Volume: 39

Vancouver
1.A. A Mısbah. THE CORROSİON BEHAVIOUR OF LEAD IN SODIUM HYDROXIDE SOLUTIONS CONTAINING MOLYBDATE IONS. Commun. Fac. Sci. Univ. Ank. Ser. B. 1993 Jan. 1;39. doi:10.1501/Commub_0000000433

Communications Faculty of Sciences University of Ankara Series B Chemistry and Chemical Engineering

88x31.png

This work is licensed under a Creative Commons Attribution 4.0 International License.