MODELING OF ENERGY FLOW BALANCES AT A FOUR LEVELLED PARALLEL FLOW PRECALCINER CEMENT PLANT

Abstract

this present study, energy flow balances of parallel flow precalciner four levelled cement production systems were generated. At cement production systems, energy flow balances can be considered as either integrated or separately for preheater, calcinator, rotary kiln and cooler unit. Fundamental of this modelling is energy balance of plant units such as precalciner, calcinator, rotary kiln and grate coolers. Amount of energy of solid and gases at the input and output of rotary kiln, calcinator and parallel flow preheater siclones, can be calculated with this modeling.

Keywords

• Parallel flow,Precalciner,Energy,Modelling

DORT KADEMELi PARALEL AKI~LI ONKALSiNATORLU C;iMENTO FABRiKASINDA ENERJi AKIMLARI DENKLiKLERiNiN MODELLENMESi

Abstract

Bu cahsmada, paralel akish onkalsinatorlu dort kademeli cimento iiretim sistemlerinde enerji akirm denklikleri kurulmustur. Cimento iiretim prosesinde enerji akmu denkligi bir biitiin olarak ele ahnabilecegi gibi bu cahsrnada oldugu gibi onrsrnci, kalsinator, doner firm ve sogutucu iinite icin ayn ayn denklik olusturulabilir. Bu modelin temeli, fabrika iiniteleri omsmci, onkalsinator, doner finn ve izgarah sogutucu enerji dengesine dayanmaktadir. Bu modelleme ile doner finn, onkalsinator ve paralel akish orusrticr siklonlann her birinin giris ve crkrslanndaki kau ve gaz kiitlelerin enerji miktarlan hesaplanmaktadir,

Keywords

• Paralel akis,Onkalsinator,Enerji,Modelleme

References

1. [1] LOCHER, G., "Mathematical Models for the Cement Clinker Burning Process Part I:Reactions and UnitOperations", ZKG INTERNATiONAL, Vo1.55, No:l, pp. 29-37, 2002
2. [2] KHURANA, S., BANERJEE, GAiTONDE, U.", Energy Balance and Cogeneration for a Cement Plant", Aplied Thermal Engineering, Vo1.22, pp.485-494, 2002.
3. [3] ERKOV AN, t, "Cimento Uretiminde Enerji Tasarrufu", T<;MB, No:230, 1986
4. [4] ELKJAER, H.P.,<;eviren OKBA~, Y., "Matematiksel Model Uygulayarak Dort Kademeli Siklonlu Omsmcida lSI Harcamasirun Tayini", T<;MB, No:241, 1987
5. [5] LOCHER, G., "Mathematical Models for The Cement Clinker Burning Process Part 3:Rotary Kiln", ZKGINTERNATiONAL, Vol. 55, No:3, pp.68-80, 2002
6. [6] KOLjp, A., "Cimento Uretiminde Enetji ve Eksetji Analizi", Doktora Tezi, YIldiz Teknik UniversitesiFen. Bil. Enstitiisii, 1993
7. [7] SAVAS, A.F. "Mathematical modelling of mass balance of different proportion in a cement factory"Energetikarun Problernleri, No:2, pp.91-101, 2004
8. [8] LOCHER, G., "Mathematical Models for The Cement Clinker Burning Process Part 4: Great Cooler" ,ZKG INTERNATiONAL, Vol. 55, No:2, pp.46-58,2002

9. [9] LOCHER, G."Mathematical Models for The Cement Clinker Burning Process Part 2:Preheater, Calciner and Bypass", ZKG INTERNATiONAL, Vol. 55, No:1, pp.39-50, 2002
10. [10] LOCHER, G., "Mathematical Models for The Cement Clinker Burning Process Part 3:Rotary Kiln", ZKG INTERNATiONAL, Vol. 55, No:3, pp.68-80, 2002
11. [11] GARDEIK, H.O., LUDWIG, H. And STEINBIB, E., "Calculation of Heat Loss Trough the Walls of Rotary Kiln and Mills:Part I", ZKG, No:2, 1980
12. [12] GARDEIK, H.O., LUDWIG, H. "Calculation of Heat Loss Trough the Walls of Rotary Kiln and Mills:Part If', ZKG, No:5, 1985
13. [13] ONISSI, T.R., "Some Considerations on Heat Transfer in The Rotary Kiln", ZKG, No:8, 1970
14. [14] SCHEUER, A., ELLERBROCK, H.,G., "Possible ways of saving energy in cement production", ZKG, No:7, pp.175-182, 1992
15. [15] MiROLLi, M.D., "The Kalma Cycle For Cement Kiln Waste Heat Recovery Poyer Plants", IEEE, pp.330-336, 2005
16. [16] GARDEiK, H.O., "Fuel Energy Consumption in Cement Burning With Precalcining", ZKG, No:12,pp.611-617,1981
17. [17] LABAHN, 0., "Cement Engineers Handbook", Fourth Ediation, 1983
18. [18] CENGEL, Y., A., "Introduction to Thermodynamics and Heat Transfer", 1997
19. [19] BUYUKTURK, A., R., "Termodinarnik Cilt I Termodinamigin Temel Yasalan", Uludag Unv. BasimEvi,1982 .
20. [20] BEKER, H., HAMILTOM, M., Cev. KATNAS, F., " Onkalsinator ve Fmnlar", T<;MB, Cilt.9, Sayi 96,s. 41-44,1997
21. [21] PERAY, E., K., "Cement Manufacturers Handbook", Chemical publishing Co. Inc., 1979, USA
22. [22] GARDEiK, H.O., ROSEMAN, H. And STEINBACH, V., Ceviren TURKER, P., "Klinker Sogutuculannm Termal Olarak Degerlendirilmesi'', T<;MA, Cilt.25, SaY1.253,ss.13-31, 1988
23. [23] STEINBACH, V., MUJUMDAR, K.S., GANESH, K.V., KULKARNi, S.B., RADANE, Vivek V. "Rotary Cement Kiln Simulator (RoCKS): Integrated Modeling of Pre-heater, Calciner, Kiln and Clinker Cooler", Chemical Engineering Science, Vo1.62, pp.2590-2607, 2007
24. [24] KREFr, W., GUNNEWiG, L. "Possibilities for Energy Saving in the Clinker Burning Process byOptimization of rotary Coolers and Planetary Coolers", ZKG, No: 1, pp.12-1989
25. [25] GOCER, C., "Doner Finn Muhendisligi.Adana Cimento Sanayii T.A.S. Yaymlan, No.2, Ocak-2001
26. [26] CARVALHO, M., MODiv ATE, De O. "Theoretical Energy Requirement for Burning Clinker", Cement and Concrete Research, Vo1.29, pp.695-698, 1999
27. [27] CHAKRABARTi, B.K., "Investigations on Heat Loss Trough the Kiln Shell in Magnesite Dead Burning Process: A Case Study", Ablied Thermal Engineering, Vo1.22, pp.1339-1345, 2002
28. [28] MRATINS, M.A., OLIVEIRA, L.S., FRANCA, A.S., "Modelling and Simulation of Limestone Calcination in Rotary Kilns Part 1: pilot kiln", ZKG INTERNATiONAL, Vol. 55, No:4, pp.76-85, 2002
29. [29] FiDAROS,D.K., BAXEV ANOU, c.x., VLACHOS Dritselis and N.S., "Numerical Modelling of Flow and Transport Processes in a Calciner for Cement Production ", Powder Technology, VoLl71, No.2, pp.81- 95,2007
30. [30] HARDER, J., "Development of Precalcining Technology in the Cement Industry", ZKG INTERNATIONAL, Vo1.55, No:lO, pp.34-39,2002
31. [31] GARDEiK, H.O., and ROSEMANN, H., "Fuel Energy Consumption and Fuel Energy Apportionment in the Precalcining Process", ZKG, No:9, pp.435-444, 1981
32. [32] OKBAS, Y., "Klinker Uretim Prosesinde Hava Kacaklan ve Bedeli", Cimento Sanayiinde Enerji Tasarrufu Semineri Tebligleri, 1989