Research Article
BibTex RIS Cite

FORMATION OF NOISE MAPS AT SURFACE MINES

Year 2007, Issue: 013, 78 - 84, 15.06.2007

Abstract

large sump of the works carried out to evaluate the environmental noise, is encountered as either the presentation of the measured values or putting forward these values on the noise maps. It was the purpose of the present work to calculate and to constitute a map of noise in a more practical manner firstly at surface mines as well as where else high noise levels are occurred (airways, highways, industrial areas etc.). Therefore, planning works for the protection from unwanted noise levels could be achieved.

References

  • [1]. Cinar, i. 2005. "Madencilikte Giirtiltii Analizi, Modellenmesi ve Haritalanmasi", Doktora Tezi, FenBilimleri Enstitusu, Selcuk Universitesi, Konya, s141.
  • [2]. Forssen, J., Ogren, M. 2002. ''Thick Barrier Noise-Reduction in the Presence ofAtmosphericTurbulence: Measurements and Numerical Modelling", Applied Acoustics, Vol 63,ppI73-187.
  • [3]. Hasgiir, i. 1992. "Giirtiltii Kirliliginin Tiirk Mevzuatmdaki Yeri", Ekoloji Cevre Dergisi, Cilt 1, SaYI 4, ss3]-33.
  • [4]. GY (Giirtiltii Yonetmeligi), 2003. Resmi Gazete, SaYI 25325, 23.12.2003.
  • [5]. Golebiewski, R., Makarewicz, R. 2002. "Engineering Formulas for Ground Effects on Broad-Band Noise", Applied Acoustics, Vol 63, pp993-]001.
  • [6]. Kluijver, H., Stoter, J. 2003. "Noise Mapping and GIS: Optimising Quality and Efficiency of Noise Effect Studies", Computers, Environment and Urban System, No 27, pp85-102.
  • [7]. Marsh, KJ. 1982. The Concawe Model for Calculating the Propagation of Noise from Open Air Industrial Plants, Applied Acoustics, V01.15, p411.
  • [8]. Pathak, K. 1996. "Modelling and Prediction of Environmental Noise Levels Near Mechanised Surface Mines and Quarries", PhD Thesis, Imperial College, London, October, p302.
  • [9]. Pathak, K.,Durucan, S., Kunimatsu, S. 1999. "Activity Accounting Technique for Environmental Noise Assessment in Mechanized Surface Mining", Environmental Monitoring and Assessment, Vol 56, No 3, pp241-256.
  • [10]. Saltoglu, S. 1983. "Madenlerde Havalandrrma ve Emniyet i~leri", iTO Maden Fakiiltesi, istanbul,s302.
  • [11]. Shao, W., Lee, H.P., Lim, S.P. 2001. "Performance of Noise Barriers with Random Edge Profiles",Applied Acoustics, Vol 62, pp 1157 -1170.

AÇIK İŞLETMELERDE GURULTU HARiTALARININ OLUŞTURULMASI

Year 2007, Issue: 013, 78 - 84, 15.06.2007

Abstract

Cevresel gtirtilttintin degerlendirilmesi konusunda yapilan cahsmalann onemli bir bolurnu, olctim sonuclannm verilmesi ve bazilannda da degerlerin harita tizerinde gosterilmesi olarak karsmuza crkmaktadrr. Bu cahsma ile basta acik isletme madenciligi olmak tizere yuksek gurultu seviyelerine ulasildrgi diger alanlarda da (havaalanlan, karayollan, sanayi bolgeleri, v.b.) uygulanabilecek bir yontern ile gtiriiltu yayihmmm cok daha kolay ve pratik olarak hesaplanmasi ve haritalanrnasi amaclanrrusnr, Boylelikle gurultuden korunma yontemlerinin tamarmmn planlamasina yon verilebilecektir.

References

  • [1]. Cinar, i. 2005. "Madencilikte Giirtiltii Analizi, Modellenmesi ve Haritalanmasi", Doktora Tezi, FenBilimleri Enstitusu, Selcuk Universitesi, Konya, s141.
  • [2]. Forssen, J., Ogren, M. 2002. ''Thick Barrier Noise-Reduction in the Presence ofAtmosphericTurbulence: Measurements and Numerical Modelling", Applied Acoustics, Vol 63,ppI73-187.
  • [3]. Hasgiir, i. 1992. "Giirtiltii Kirliliginin Tiirk Mevzuatmdaki Yeri", Ekoloji Cevre Dergisi, Cilt 1, SaYI 4, ss3]-33.
  • [4]. GY (Giirtiltii Yonetmeligi), 2003. Resmi Gazete, SaYI 25325, 23.12.2003.
  • [5]. Golebiewski, R., Makarewicz, R. 2002. "Engineering Formulas for Ground Effects on Broad-Band Noise", Applied Acoustics, Vol 63, pp993-]001.
  • [6]. Kluijver, H., Stoter, J. 2003. "Noise Mapping and GIS: Optimising Quality and Efficiency of Noise Effect Studies", Computers, Environment and Urban System, No 27, pp85-102.
  • [7]. Marsh, KJ. 1982. The Concawe Model for Calculating the Propagation of Noise from Open Air Industrial Plants, Applied Acoustics, V01.15, p411.
  • [8]. Pathak, K. 1996. "Modelling and Prediction of Environmental Noise Levels Near Mechanised Surface Mines and Quarries", PhD Thesis, Imperial College, London, October, p302.
  • [9]. Pathak, K.,Durucan, S., Kunimatsu, S. 1999. "Activity Accounting Technique for Environmental Noise Assessment in Mechanized Surface Mining", Environmental Monitoring and Assessment, Vol 56, No 3, pp241-256.
  • [10]. Saltoglu, S. 1983. "Madenlerde Havalandrrma ve Emniyet i~leri", iTO Maden Fakiiltesi, istanbul,s302.
  • [11]. Shao, W., Lee, H.P., Lim, S.P. 2001. "Performance of Noise Barriers with Random Edge Profiles",Applied Acoustics, Vol 62, pp 1157 -1170.
There are 11 citations in total.

Details

Primary Language Turkish
Subjects Engineering
Journal Section Articles
Authors

İbrahim Çınar This is me

Cem Şensöğüt This is me

Publication Date June 15, 2007
Published in Issue Year 2007 Issue: 013

Cite

APA Çınar, İ., & Şensöğüt, C. (2007). AÇIK İŞLETMELERDE GURULTU HARiTALARININ OLUŞTURULMASI. Journal of Science and Technology of Dumlupınar University(013), 78-84.

HAZİRAN 2020'den itibaren Journal of Scientific Reports-A adı altında ingilizce olarak yayın hayatına devam edecektir.