Kanatlı-borulu ısı değiştiricilerde belirsizlik analizi

Erhan Kırtepe; Necdet Özbalta

Kanatlı-borulu ısı değiştiricilerde belirsizlik analizi

Öz

Bu çalışmada, L ayaklı spiral kanatlı ve borulu ısı değiştirici hava tarafı performansı deneysel olarak incelenmiştir. Çalışma akışkanı olarak, hava tarafında çevre havası, boru tarafında ise su kullanılmıştır. Deneylerde hava debisi ve su giriş sıcaklığı değiştirilirken, su debisi sabit tutulmuştur. Her iki çalışma akışkanının kütle debisi, giriş ve çıkış sıcaklıkları, hava tarafına ait basınç düşümü, ısı geçişini hesaplamak için ölçülmüştür. Deneysel çalışmalar, hata ve belirsizlikler içerirler. Deneysel çalışmalardaki hata ve belirsizlikler, ölçüm cihazı, kalibrasyon verileri, ölçüm süreci, çalışanların becerileri, çevresel etkiler ve diğer faktörlerden kaynaklanır. Bu nedenle sonuçtaki belirsizlikleri hesaplamak için her ölçümde bu etkiler belirlenmelidir. Bu çalışmada, ısı transfer sistemlerindeki belirsizlik analizi açıklanmıştır

Anahtar Kelimeler

Isı değiştirici,kanatlı boru,spiral kanat,belirsizlik

References

Bilirgen H, Dunbar S, Levy EK. (2013). “Numerical modeling of finned heat exchangers”. Journal Applied Thermal Engineering, 61(2), 278-288.
Claesson J. (2004). Thermal and Hydraulic Performance of Compact Brazed Plate Heat Exchangers Operating as Evaporators in Domestic Heat Pumps. Doctoral Thesis, Royal Enstitute of Technology, KTH, Stockholm, Sweden.
Coblentz LC. (2009). Uncertainty Analysis of Heat Exchanger. Msc Thesis, Mechanical Engineering in the Faculty of Engineering at the Rand Africaans University, Johannesburg, South Africa.
Coleman HW, Steele WG. (2009). Experimentation, Validation, and Uncertainty Analysis for Engineers. 3rd ed. Hoboken, New Jersy, USA, John Wiley and Sons.
Freund JE, Simon GA. (1992). Modern Elementary Statistics. 8th ed. New Jersy, USA, Prentice-Hall Internetional, Inc.
JCGM 100:2008, (2008). “Evaluation of measurement data - Guide to the expression of uncertainty in measurement”. First edition, September. hptt:/www.bipm.org/utils/common/documents/jcgm/JCGM_100_2008_E.pdf (22.09.2015)
Kawaguchi K, Okui K, Kashi T. (2005). “Heat Transfer and Pressure Drop Characteristics of Finned Tube Banks in Forced Convection (Comparison of the Heat Transfer Characteristics between Spiral Fin and Serrated Fin)”. Heat Transfer—Asian Research, 34(2), 120-133.
Kawaguchi K, Okui, K, Asai, T, Hasegawa Y. (2006). “The Heat Transfer and Pressure Drop Characteristics of the Finned Tube Banks in Forced Convection (Effects of Fin Height on Heat Transfer Characteristics)”. Heat Transfer—Asian Research, 35(3), 194-208.

Kırtepe E. (2014). Kanatlı Dairesel Borularda Isı Transfer Etkinliğinin İncelenmesi. Yüksek Lisans Tezi, Ege Üniversitesi Fen Bilimleri Enstitüsü, İzmir, Türkiye.
Kraus AD, Aziz A, Welty J. (2001). Extended Surface Heat Transfer. New York, USA, John Wiley & Sons.
Mathioulakis E, Voropoulos K, Belessiotis V. (1999). “Assessment of Uncertainty In Solar Collector Modeling and Testing”. Solar Energy, 66(5), 337–347.
Ma Y, Yuan Y, Liu Y, Hu X, Huang Y. (2012). “Experimental investigation of heat transfer and pressure drop in serrated finned tube banks with staggered layouts”. Applied Thermal Engineering, 37, 314-323.
Mon MS, Gross U. (2004). “Numerical study of fin-spacing effects in annular-finned tube heat exchangers”. International Journal of Heat and Mass Transfer, 47, 1953–1964.
Müller-Schöll, C, Frei, U. (2000). “Uncertainty Analyses In Solar Collector Measurement”. EuroSun Conference, Copenhagen, Denmark.
Næss E. (2010). “Experimental investigation of heat transfer and pressure drop in serrated-fin tube bundles with staggered tube layouts”. Applied ThermalEngineering, 30, 1531-1537.
Nasa Handbook, (2010). “Measurement Uncertainty analysis principles and methods”. NASA-HDBK-8739.19-3. http://www.hq.nasa.gov/office/codeq/doctree/NHBK873919-3.pdf (06.10.2015)
Pongsoi P, Pikulkajorn S, Wang CC, Wongwises S. (2011). “Effect of fin pitches on the air-side performance of crimped spiral fin-and-tube heat exchangers with a multipass parallel and counter cross-flow configuration”. International Journal of Heat and Mass Transfer, 54, 2234–2240.
Pongsoi P, Pikulkajorn S, Wongwises S. (2012a). “Experimental study on the air-side performance of a multipass parallel and counter cros-flow L-footed spiral fin-and-tube heat exchanger”. Heat transfer engineering, 33(15), 1251–1263.
Pongsoi P, Pikulkajorn S, Wongwises S. (2012b). “Effect of fin pitches on the optimum heat transfer performance of crimped spiral fin-and-tube heat exchangers”. International Journal of Heat and Mass Transfer, 55, 6555–6566.
Sabatelli V, Marano D, Braccio G, Sharma VK. (2002). “Efficiency test of solar collectors: uncertainty in the estimation of regression parameters and sensitivity analysis”. Energy Conversion and Management, 43, 2287–2295.
Sadıkhov E, Kangı R, Uğur S. (1995). “Ölçüm Belirsizliği”, Ulusal Metroloji Enstitüsü (UME), 95-104.
Shah RK, Sekulic DP. (2003). Fundamentals of Heat Exchanger Design. Hoboken, New Jersy, USA, John Wiley & Sons.
Tatara RA, Lupia GM. (2011). “Assessing heat exchanger performance data using temperature measurement uncertainty”. International Journal of Engineering, Science and Technology, 3(8).
Uhia FJ, Campo A, Fernandez-Seara J. (2013) “Uncertainty Analysis for Experimental Heat Transfer Data Obtained by the Wilson Plot Method Application to Condensation on Horizontal Plain Tubes”. Thermal Science, 17(2), 471-487.
Wang CC, Chi KY, Chang CJ. (2000). ”Heat transfer and friction characteristics of plain fin-and- tube heat exchangers, part II: Correlation”. International Journal of Heat and Mass Transfer, 43, 2693-2700.

Details

Primary Language

Turkish

Subjects

-

Journal Section

Research Article

Authors

Erhan Kırtepe ^* This is me

Necdet Özbalta This is me

Publication Date

April 4, 2018

Submission Date

January 11, 2017

Acceptance Date

June 1, 2017

Published in Issue

Year 2018 Volume: 9 Number: 1

IZ

https://izlik.org/JA45PE86YM

Cite

RIS / Bibtex

IEEE

[1]E. Kırtepe and N. Özbalta, “Kanatlı-borulu ısı değiştiricilerde belirsizlik analizi”, DUJE, vol. 9, no. 1, pp. 161–175, Mar. 2018, [Online]. Available: https://izlik.org/JA45PE86YM