Evaluation of Different Beverages’ Effect on Microhardness and Surface Roughness of Different Artificial Teeth

Year 2021, Volume: 48 Issue: 3, 88 - 94, 31.12.2021

Şule Tuğba Deniz Pelin Özkan

https://doi.org/10.52037/eads.2021.0031

Cited By: 1

Abstract

Purpose: This study evaluated the microhardness and surface roughness of four artificial teeth type against various beverages.
Materials and Methods: Conventional acrylic resin, reinforced acrylic resin, microfiller composite resin, and nanofiller composite resin teeth were used. From each group, 10 maxillary first and second molars were immersed in 5 beverages (tea, filtered coffee, cola, cherry juice, and distilled water. The test period of 24 hours appears comparable to approximately 1 month of normal beverage consumption. The test periods used in this study were arranged according to this protocol and 1 week, 1 month, 3 months and 6 months of normal beverage consumptions were simulated. Vickers microhardness and surface roughness of denture teeth were measured for each test period.
Results: The microhardness values significantly decreased in all beverages especially in 6th month. The surface roughness values significantly increased in all beverages especially in 3th month. There were no statistically significant differences between the beverages. Microfiller composite resin denture teeth had the highest microhardness values and the lowest surface roughness values.
Conclusions: Different types of beverages consumed daily negatively affect the microhardness and surface roughness of artificial teeth. Microfiller composite resin teeth could have the ideal surface properties.

Keywords

artificial tooth, beverages, microhardness, surface roghness, nano composite

Supporting Institution

Anakara University Faculty of Dentistry Research Support Fund

Project Number

225

References

• 1. Mutlu-Sagesen L, Ergün G, Özkan Y, Bek B. Color stability of different denture teeth materials: an in vitro study. J Oral Sci. 2001;43(3):193-205. doi: 10.2334/josnusd.43.193
• 2. Hao Z, Yin H, Wang L, Meng Y. Wear behavior of seven artificial resin teeth assessed with three-dimensional measurements. J Prosthet Dent. 2014;112(6):1507-12. doi: 10.1016/j.prosdent.2014.04.030
• 3. Duke ES. Has dentistry moved into the nanotechnology era? Compend Contin Edu Dent. 2003;24(5):380-2.
• 4. Atabek D, Sillelioglu H, Olmez A. The efficiency of a new polishing material: nanotechnology liquid polish. Oper Dent. 2010;35(3):362-69. doi: 10.2341/09-196-T
• 5. Bayne SB. Dental Biomaterials: Where Are We and Where Are We Going? J Dent Educ. 2005;69(5):571-78.
• 6. Jung M, Sehr K, Klimek J. Surface texture of four nanofilled and one hybrid composite after finishing. Oper Dent. 2007;32(1):45-52. doi: 10.2341/06-9
• 7. Uehara PN, Iegami CM, Tamaki R, Ballester RY, de Souza RM, Laganá DC. Analysis of behavior of the wear coefficient in different layers of acrylic resin teeth. J Prosthet Dent. 2019;121(6):967.e1-e6. doi: 10.1016/j.prosdent.2019.02.022
• 8. Köksal T, Dikbas I. Color stability of different denture teeth materials against various staining agents. Dent Mater J. 2008;27(1):139-44. doi: 10.4012/dmj.27.139
• 9. Yuzugullu B, Acar O, Cetinsahin C, Celik C. Effect of different denture cleansers on surface roughness and microhardness of artificial denture teeth. J Adv Prosthodont. 2016 8:333-8. doi: 10.4047/jap.2016.8.5.333
• 10. Kawano F, Ohguri T, Ichikawa T, Mizuno I, Hasegawa A. Shock absorbability and hardness of commercially available denture teeth. Int J Prosthodont. 2002;15(3):243-47.
• 11. Kamonwanon P, Yodmongkol S, Chantarachindawong R, Thaweeboon S, Thaweeboon B, Srikhirin T. Wear resistance of a modified polymethyl methacrylate artificial tooth compared to five commercially available artificial tooth materials. J Prosthet Dent. 2015;114(2):286-92. doi: 10.1016/j.prosdent.2015.01.013
• 12. Craig RG, Powers JM. Restorative Dental Materials. 11th Ed., St. Louis, Missouri: Mosby, Inc., 2002. p. 672-75.
• 13. Loyaga-Rendon PG, Takahashi H, Hayakawa I, Iwasaki N. Compositional characteristics and hardness of acrylic and composite resin artificial teeth. J Prosthet Dent. 2007;98(2):141-49. doi: 10.1016/S0022-3913(07)60047-X.
• 14. Imamura S, Takahashi H, Hayakawa I, Loyaga-Rendon PG, Minakuchi S. Effect of filler type and polishing on the discoloration of composite resin artificial teeth. Dent Mater J. 2008;27(6):802-8. doi: 10.4012/dmj.27.802
• 15. Jin S, Choi JW, Jeong CM, Huh JB, Lee SH, Lee H, et al. Evaluating the wear of resin teeth by Different Opposing Restorative Materials. Materials. 2019;12(22):3684-95. doi: 10.3390/ma12223684
• 16. Mosharraf R, Ziaei F, Abbasi M. Effect of denture tooth material on load transmission under denture bases. J Dent. 2018;15(5):325-31.
• 17. Suzuki S. In vitro wear of nano-composite denture teeth. J Prosthodont. 2004;13(4):238-43. doi: 10.1111/j.1532-849X.2004.04043.x
• 18. Ghazal M, Albashaireh ZS, Kern M. Wear resistance of nanofilled composite resin and feldspathic ceramic artificial teeth. J Prosthet Dent. 2008;100(6):41-8. doi: 10.1016/S0022-3913(08)60262-0.
• 19. Kakaboura A, Fragouli M, Rahiotis C, Silikas N. Evaluation of surface characteristics of dental composites using profilometry, scanning electron, atomic force microscopy and gloss-meter. J Mater Sci Mater Med. 2007;18(1):155-63. doi: 10.1007/s10856-006-0675-8
• 20. Bollen C, Lambrechts P, Quirynen M. Comparison of surface roughness of oral hard materials to the threshold surface roughness for bacterial plaque retention: a review of the literature. Dent Mater. 1997;3:258-69. doi: 10.1016/s0109-5641(97)80038-3
• 21. Tahmassebi JF, Duggal MS, Malik-Kotru G, Curzon ME. Soft drinks and dental health: a review of the current literature. J Dent. 2006;34(1):2-11. doi: 10.1016/j.jdent.2004.11.006
• 22. Badra VV, Faraoni JJ, Ramos RP, Palma-Dibb RG. Influence of different beverages on the microhardness and surface roughness of resin composites. Oper Dent. 2005;30(2):213-19.
• 23. West NX, Hughes JA, Addy M. Erosion of dentine and enamel in vitro by dietary acids: the effect of temperature, acid character, concentration and exposure time. J Oral Rehabil. 2000;27(10):875-80. doi: 10.1046/j.1365-2842.2000.00583.x
• 24. Jensdottir T, Holbrook P, Nauntofte B, Buchwald C, Bardow A. Immediate erosive potential of cola drinks and orange juices. J Dent Res. 2006;85(3):226-30. doi: 10.1177/154405910608500304
• 25. Fraunhofer JA, Rogers MM. Dissolution of dental enamel in soft drinks. Gen Dent. 2004;52(4):308-12.
• 26. Güler AU, Yılmaz F, Kulunk T, Guler E, Kurt S. Effects of different drinks on stainability of resin composite provisional restorative materials. J Prosthet Dent. 2005;94(2):118-24. doi: 10.1016/j.prosdent.2005.05.004
• 27. Stober T, Lutz T, Gilde H, Rammelsberg P. Wear of resin denture teeth by two-body contact. Dent Mater. 2006;22(3):243-49. doi: 10.1016/j.dental.2005.03.009
• 28. Güler AU, Duran İ, Yücel AÇ, Özkan P. Effects of air-polishing powders on color stability of composite resins. J Appl Oral Sci. 2011;19(5):505-10. doi: 10.1590/s1678-77572011005000021
• 29. Kim KH, Ong JL, Okuno O. The effect of filler loading and morphology on the mechanical properties of contemporary composites. J Prosthet Dent. 2002;87(6)642-49. doi: 10.1067/mpr.2002.125179
• 30. Yanıkoğlu N, Duymuş ZY, Yılmaz B. Effects of different solutions on the surface hardness of composite resin materials. Dent Mater J. 2009;28(3):344-51.
• 31. Milleding P, Ahlgren F, Wennerberg A, Ortengren U, Karlsson S. Microhardness and surface topography of a composite resin cement after water storage. Int J Prosthet Dent. 1998;11(1):21-26.
• 32. West NX, Hughes JA, Addy M. Erosion of dentine and enamel in vitro by dietary acids: the effect of temperature, acid character, concentration and exposure time. J Oral Rehabil. 2000;27(10):875-80. doi: 10.1046/j.1365-2842.2000.00583.x
• 33. Wongkhantee S, Patanapiradej. Maneenut C, Tantibirojin D. Effect of acidic food and drinks on surface hardness of enamel, dentine, and tooth-coloured filling materials. J Dent. 2006;34(3):214-20. doi: 10.1016/j.jdent.2005.06.003
• 34. Mesquita-Guimaraes KSF, Scatena C, Borsatto CM, Rodrigues-Junior AL, Monica Campos Serra MC. Effect of foods and drinks on primary tooth enamel after erosive challenge with hydrochloric acid. Braz Oral Res. 2015;29(1):1-7 Epub. doi: 10.1590/1807-3107BOR-2015.vol29.0096
• 35. Sarı ME, Koyutürk AE, Çankaya S. Günlük tüketilen yiyecek ve içeceklerin mine ve dolgu materyallerinin yüzey sertliği ve pürüzlülüğüne etkisi. Atatürk Üniv Diş Hek Fak Derg. 2010;20(3):153-61.
• 36. Aliping-McKenzie M, Linden RW, Nicholson JW. The effect of Coca-Cola and fruit juices on the surface hardness of glass-ionomers and 'compomers'. J Oral Rehabil. 2004;31(11):1046-52. doi: 10.1111/j.1365-2842.2004.01348.x
• 37. Pavarina AC, Vergani CE, Machado AL, Giampaolo ET, Teraoka MT. The effect of disinfectant solutions on the hardness of acrylic resin denture teeth. J Oral Rehabil. 2003;30(7):749-52. doi: 10.1046/j.1365-2842.2003.01145.x
• 38. Campanha NH, Pavarina AC, Vergani CE, Machado AL. Effect of microwave sterilization and water storage on the Vickers hardness of acrylic resin denture teeth. J Prosthet Dent. 2005;93(5):483-87. doi: 10.1016/j.prosdent.2005.02.016
• 39. Ersu B, Hannak WB, Freesmeyer WB. Tam ve bölümlü protezlerde kullanılan akrilik rezin dişlerin sertliklerinin karşılaştırılması. H Ü Diş Hek Fak Derg. 2007;31(4):58-64.
• 40. Campanha NH, Pavarina AC, Jorge JH, Vergani CE, Machado AL, Giampaolo ET. The effect of long-term disinfection procedures on hardness property of resin denture teeth. Gerodontology. 2012;29(2): e571-76. doi: 10.1111/j.1741-2358.2011.00520.x
• 41. Hahnel S, Rosentritt M, Bürger R, Handel G. Adhesion of Streptococcus mutans NCTC 10449 to artificial teeth: an in vitro study. J Prosthet Dent. 2008;100(4):309-15. doi: 10.1016/S0022-3913(08)60212-7