BibTex RIS Cite

Clinical Evaluation Of Occlusal Overlays And Complete Coverage Crowns

Year 2017, Volume: 44 Issue: 3 - Volume: 44 Issue: 3, 155 - 166, 01.08.2017

Abstract

Aim: Bonded, occlusal overlays constitute a conservative alternative to traditional complete coverage crowns. The aim of this study is to evaluate the selection of the appropriate restoration design, and its influence on the periodontal health, marginal discoloration, secondary caries, fracture stregth and retention which may affect the longevity of the restoration. Materials and methods : Ten patients were included and two different restoration designs 5 complete coverage crowns, 5 modified occlusal overlays was used. Restorations were fabricated by milling 3M Lava Ultimate blocs with Cerec CAD/CAM system. 10 restorations were evaluated according to modified USPHS United States Public Health Service Criteria criteria in 1, 3 and 6 months periods. Results: 1 month after the cementation of the restorations, no signifuture differences was observed between the two restoration types. After 3 months, periodontal problems began to occure in the complete coverage crowns. After 6 months, the complete coverage crowns showed marginal discoloration. No decementation, fracture and secondary caries were occured in two types of the restorations. Conclusions : Within the limitations of this study, it can be concluded that, the clinical performances of the occlusal overlays were more satisfactory than the complete coverage crowns

References

  • 1- Skouridoua N, Pollingtona S, Rosentrittb M, Tsitroua E. Fracture strength of minimally prepared all-ceramic CEREC crowns after simulating 5 years of service. Dent Mat. 2013; 29: 70–77.
  • 2- Magne P, Belser U. Bonded porcelain restorations in the anterior dentition: a biomimeticapproach. Chicago. Quintessence 2002; 23-55.
  • 3- Mount GJ, Ngo H. Minimal intervention: advanced lesions. Quintessence Int. 2000; 31(9): 621-629.
  • 4- Cohen RG, Rudo D. Treating cracked teeth biomimetically can optimize clinical results. Inside Dentistry. 2011; November, Volume 7, Issue 10.
  • 5- Christensen GJ. Considering toothcolored inlays and onlays versus crowns. J Am Dent Assoc. 2008;139:617-619.
  • 6- Edelhoff D, Sorensen JA. Tooth structureremoval associated with various preparation designs for posterior teeth. Int J Periodontics Restorative Dent 2002;22:241-9.
  • 7- Van NR. Introduction to dental materials. 3rd editionEdinburgh: Mosby Elsevier; 2007.
  • 8- Attia A, Kern M. Influence of cyclic loading and luting agents on the fracture load of two all-ceramic crown systems. J. Prosthodont Dent. 2004;92:551–6.
  • 9- Behr M, Rosentritt M, Mangelkramer M. The influence of different cements on the fracture resistance and marginal adaptation of all-ceramic and fiber-reinforced crowns. Int J Prosthodont. 2003;16:538– 42.
  • 10- Magne P, Composite Resins, Bonded Porcelain. The Post amalgam Era. J Can Dent Assoc. 2006;34:135–47.
  • 11- Al-Makramani BMA, Razak AAA, AbuHassan MI. Evaluation of load at fracture of Procera AllCeram copings using different luting cements. J Prosthodont. 2008;17:120–4.
  • 12- Sundh A, Sjogren G. A comparison of fracture strength of yttrium-oxidepartially-stabilized zirconia ceramic crowns with varying core thickness, shapes and veneer ceramics. J Oral Rehab. 2004;31:682–8.
  • 13- Gracis S., Thompson Vp., Ferencz Jl., Nelson R.F.A.S, Bonfante Ea. A New Classification System For All-Ceramic And Ceramic-Like Restorative Materials. Int J Prosthodont. 2015;28:227-235.
  • 14- Magne P, Schlichting LH, Maia HP, Baratieri LN. In vitro fatigue resistance of CAD/CAM composite resin and ceramic posterior occlusal veneers. J. Prosthodont. Dent. 2010;104:149–57.
  • 15- Altun AC. Aşırı madde kaybı olan süt dişlerinde indirek yöntemle yapılan kompomer ve kompozit onley restorasyonların in vivo, in vitro ve sonlu elemanlar stres analizi ile karşılaştırılması. Süleyman Demirel Ü. Diş Hek.Fak.Sağlık Bil. Enst., Isparta, 2012
  • 16- Roggendorf MJ, Kunzi B, Ebert J, Roggendorf HC, Frankenberger R, Reich SM. Seven-year clinical performance of CEREC-2 all-ceramic CAD/CAM restorations placed within deeply destroyed teeth. Clin Oral Investig. 2012 Oct;16(5):1413-24.
  • 17- Guess PC, Strub JR, Steinhart N, Wolkewitz M, Stappert CF. All-ceramic partial coverage restorations-midterm results of a 5-year prospective clinical splitmouth study. J Dent. 2009 Aug;37(8):627-37.
  • 18- Karaarslan ES, Ertas E, Bulucu B. Clinical evaluation of direct composite restorations and inlays: Results at 12 months. J Rest Dentist. 2014 2(2):70-7
  • 19- Batson ER, Cooper LF, Duqum I, Mendonca G. Clinical outcomes of three different crown systems with CAD/CAM technology. J Prosthet Dent. 2014 Oct;112(4):770-7.
  • 20- Taschner M, Kramer N, Lohbauer U, Pelka M, Breschi L, Petschelt A, Frankenberger R. Leucite-reinforced glass ceramic inlays luted with self-adhesive resin cement: a 2-year in vivo study. Dent Mater. 2012 May;28(5):535-40.
  • 21- Aygün Emiroğlu Ş, Evren B, Kulak Özkan Y. Effect of Cements at Different Temperatures on the Clinical Performance and Marginal Adaptation of Inlay-Onlay Restorations In Vivo. J Prosthodont. 2016 Jun;25(4):302-9.
  • 22- Krifka S, Stangl M, Wiesbauer S, et al. Influence of different cusp coverage methods for the extension of ceramic inlays on marginal integrity and enamel crack formation in vitro. Clin Oral Investig. 2009;13(3):333-341.
  • 23- Reiss B. Clinical results of Cerec inlays in a dental practice over a period of 18 years. Int J Comput Dent. 2006;9:11–22.
  • 24- Pallesen U, vanDijken JW An 8-year evaluation of sintered ceramic and glass ceramic inlays processed by the Cerec CAD/CAM system. Eur J Oral Sci 2000;108:239–246.
  • 25- Zimmer S, Göhlich O, Rüttermann S, Lang H, Raab WH, Barthel CR. Longterm survival of Cerec restorations: a 10- year study. Oper Dent. 2008 33:484–487.
  • 26- Federlin M, Hiller KA, Schmalz (2010) Controlled, prospective clinical splitmouth study of cast gold vs. ceramic partial crowns: 5.5 year results. Am J Dent. 23:161–167
  • 27- Magne P, Stanley K, Schlichting LH. Modeling of ultra thin occlusal veneers. Dent Mater. 2012 Jul;28(7):777-82.
  • 28- Schlichting LH, Maia HP, Baratieri LN, Magne P. Novel-design ultra-thin CAD/CAM composite resin and ceramic occlusal veneers for the treatment of severe dental erosion. J Prosthet Dent. 2011 Apr;105(4):217-26.
  • 29- Öz FD. CAD/CAM sistemi ve yüksek ısıda presleme yöntemi ile üretilen porselen inleylerin kenar uyumu ve kırılma dayanıklılığı açısından değerlendirilmesi. Hacettepe Ü.Diş Hek.Fak. Sağlık Bil. Enst, Ankara, 2015
  • 30- Beuer F, Schweiger J, Edelhoff D. Digital dentistry: an overview of recent developments for CAD/CAM generated restorations. Br Dent J. 2008;204:505-11.
  • 31- Otto T, Schneider D. Long-term clinical results of chairside Cerec CAD/CAM inlays and onlays: a case series. Int J Prosthodont. 2008;21:53–9.
  • 32- Sensat ML, Brackett WW, Meinberg TA, Beatty MW. Clinical evaluation of two adhesive composite cements for the suppression of dentinal cold sensitivity. J Prosthet Dent 2002;88:50-53
  • 33- Taschner M, Frankenberger R, Garc´ıaGodoy F, et al: IPS empress inlays luted with a self-adhesive resin cement after 1 year. Am J Dent 2009;22:55-59
  • 34- Milleding P, Ortengren U, Karlsson S. Ceramic inlay systems: some clinical aspects. J Oral Rehabil. 1995;22:571–80.
  • 35- St-Georges AJ, Sturdevant JR, Swift Jr EJ, Thompson JY. Fracture resistance of prepared teeth restored with bonded inlay restorations. J Prosthet Dent. 2003;89:551–7.
  • 36- Reich SM, Wichmann M, Rinne H, Shortall A. Clinical performance of large, all-ceramic CAD/CAM-generated restorations after three years: a pilot study. J Am Dent Assoc. 2004;135:605–12
  • 37- Felden A, Schmalz G, Hiller KA. Retrospective clinical study and survival analysis on partial ceramic crowns: resultsupto 7 years. Clin Oral Investig. 2000;4:199– 205.
  • 38- Naeselius K, Arnelund CF, Molin MK. Clinical evaluation of all-ceramic onlays: a 4-year retrospective study. Int J Prosthodont. 2008;21:40–4.
  • 39- vanDijken JW, Hasselrot L, Ormin A, Olofsson AL. Restorations with extensive dentin/enamel-bonded ceramic coverage: A 5-year follow-up. Eur J Oral Sci. 2001;109:222–9.
  • 40- Federlin M, Wagner J, Manner T, Hiller KA, Schmalz G. Three-year clinical performance of cast gold vs ceramic partial crowns. Clin Oral Investig. 2007;11:345– 52.
  • 41- Felton D, Kanoy B, Bayne S Wirthman B. Effect of in vivo crown marjin discrepancies on periodontal health. J Prosthet Dent. 1991;65:357-64
  • 42- Lang N, Kiel R, Anderhalden K. Clinical and microbiological effects of subgingival restorations with overhanging or clinically perfect margins. J Clin Periodontol. 1983;6:563-78.

Okluzal overley ve tam kronların klinik olarak değerlendirilmesi

Year 2017, Volume: 44 Issue: 3 - Volume: 44 Issue: 3, 155 - 166, 01.08.2017

Abstract

Amaç: Adeziv bağlanan okluzal overley restorasyonlar, tam kron restorasyonlara alternatif konservatif bir tedavi seçeneği oluşturur. Bu çalışmanın amacı, uygun restorasyon tasarımı seçimine bağlı olarak ve bu seçimin restorasyonun uzun süreli kullanımını etkileyen periodontal sağlık, marjinal renklenme, sekonder çürük, restorasyonda kırık ve retansiyon üzerindeki etkilerini değerlendirmektir. Gereç ve Yöntem: 10 hasta çalışmaya dahil edilmiştir ve iki farklı restorasyon tasarımı 5 tam kron, 5 modifiye okluzal overley kullanılmıştır. Restorasyonlar Cerec CAD/CAM sistemi kullanılarak 3M Lava Ultimate bloklardan üretilmiştir. 10 üye restorasyon modifiye USPHS United States PublicHealth Service Criteria kriterleri kullanılarak 1., 3. ve 6. aylarda değerlendirilmiştir. Bulgular: Restorasyonların simantasyonunu takiben 1 ay sonra iki restorasyon tipi arasında belirgin bir fark gözlenmemiştir. 3 aydan sonra tam kron restorasyonlarda periodontal problemler görülmeye başlamıştır. 6 aydan sonra ise tam kron restorasyonlarda marjinal renklenme gözlenmiştir. Her iki restorasyon tipinde de desimantasyon, restorasyonda kırık ve sekonder çürük gözlenmemiştir. Sonuç: Bu çalışmanın sınırları içerisinde okluzal overley restorasyonların klinik performansı tam kron restorasyonlara göre daha tatmin edici olduğu düşünülebilmektedir

References

  • 1- Skouridoua N, Pollingtona S, Rosentrittb M, Tsitroua E. Fracture strength of minimally prepared all-ceramic CEREC crowns after simulating 5 years of service. Dent Mat. 2013; 29: 70–77.
  • 2- Magne P, Belser U. Bonded porcelain restorations in the anterior dentition: a biomimeticapproach. Chicago. Quintessence 2002; 23-55.
  • 3- Mount GJ, Ngo H. Minimal intervention: advanced lesions. Quintessence Int. 2000; 31(9): 621-629.
  • 4- Cohen RG, Rudo D. Treating cracked teeth biomimetically can optimize clinical results. Inside Dentistry. 2011; November, Volume 7, Issue 10.
  • 5- Christensen GJ. Considering toothcolored inlays and onlays versus crowns. J Am Dent Assoc. 2008;139:617-619.
  • 6- Edelhoff D, Sorensen JA. Tooth structureremoval associated with various preparation designs for posterior teeth. Int J Periodontics Restorative Dent 2002;22:241-9.
  • 7- Van NR. Introduction to dental materials. 3rd editionEdinburgh: Mosby Elsevier; 2007.
  • 8- Attia A, Kern M. Influence of cyclic loading and luting agents on the fracture load of two all-ceramic crown systems. J. Prosthodont Dent. 2004;92:551–6.
  • 9- Behr M, Rosentritt M, Mangelkramer M. The influence of different cements on the fracture resistance and marginal adaptation of all-ceramic and fiber-reinforced crowns. Int J Prosthodont. 2003;16:538– 42.
  • 10- Magne P, Composite Resins, Bonded Porcelain. The Post amalgam Era. J Can Dent Assoc. 2006;34:135–47.
  • 11- Al-Makramani BMA, Razak AAA, AbuHassan MI. Evaluation of load at fracture of Procera AllCeram copings using different luting cements. J Prosthodont. 2008;17:120–4.
  • 12- Sundh A, Sjogren G. A comparison of fracture strength of yttrium-oxidepartially-stabilized zirconia ceramic crowns with varying core thickness, shapes and veneer ceramics. J Oral Rehab. 2004;31:682–8.
  • 13- Gracis S., Thompson Vp., Ferencz Jl., Nelson R.F.A.S, Bonfante Ea. A New Classification System For All-Ceramic And Ceramic-Like Restorative Materials. Int J Prosthodont. 2015;28:227-235.
  • 14- Magne P, Schlichting LH, Maia HP, Baratieri LN. In vitro fatigue resistance of CAD/CAM composite resin and ceramic posterior occlusal veneers. J. Prosthodont. Dent. 2010;104:149–57.
  • 15- Altun AC. Aşırı madde kaybı olan süt dişlerinde indirek yöntemle yapılan kompomer ve kompozit onley restorasyonların in vivo, in vitro ve sonlu elemanlar stres analizi ile karşılaştırılması. Süleyman Demirel Ü. Diş Hek.Fak.Sağlık Bil. Enst., Isparta, 2012
  • 16- Roggendorf MJ, Kunzi B, Ebert J, Roggendorf HC, Frankenberger R, Reich SM. Seven-year clinical performance of CEREC-2 all-ceramic CAD/CAM restorations placed within deeply destroyed teeth. Clin Oral Investig. 2012 Oct;16(5):1413-24.
  • 17- Guess PC, Strub JR, Steinhart N, Wolkewitz M, Stappert CF. All-ceramic partial coverage restorations-midterm results of a 5-year prospective clinical splitmouth study. J Dent. 2009 Aug;37(8):627-37.
  • 18- Karaarslan ES, Ertas E, Bulucu B. Clinical evaluation of direct composite restorations and inlays: Results at 12 months. J Rest Dentist. 2014 2(2):70-7
  • 19- Batson ER, Cooper LF, Duqum I, Mendonca G. Clinical outcomes of three different crown systems with CAD/CAM technology. J Prosthet Dent. 2014 Oct;112(4):770-7.
  • 20- Taschner M, Kramer N, Lohbauer U, Pelka M, Breschi L, Petschelt A, Frankenberger R. Leucite-reinforced glass ceramic inlays luted with self-adhesive resin cement: a 2-year in vivo study. Dent Mater. 2012 May;28(5):535-40.
  • 21- Aygün Emiroğlu Ş, Evren B, Kulak Özkan Y. Effect of Cements at Different Temperatures on the Clinical Performance and Marginal Adaptation of Inlay-Onlay Restorations In Vivo. J Prosthodont. 2016 Jun;25(4):302-9.
  • 22- Krifka S, Stangl M, Wiesbauer S, et al. Influence of different cusp coverage methods for the extension of ceramic inlays on marginal integrity and enamel crack formation in vitro. Clin Oral Investig. 2009;13(3):333-341.
  • 23- Reiss B. Clinical results of Cerec inlays in a dental practice over a period of 18 years. Int J Comput Dent. 2006;9:11–22.
  • 24- Pallesen U, vanDijken JW An 8-year evaluation of sintered ceramic and glass ceramic inlays processed by the Cerec CAD/CAM system. Eur J Oral Sci 2000;108:239–246.
  • 25- Zimmer S, Göhlich O, Rüttermann S, Lang H, Raab WH, Barthel CR. Longterm survival of Cerec restorations: a 10- year study. Oper Dent. 2008 33:484–487.
  • 26- Federlin M, Hiller KA, Schmalz (2010) Controlled, prospective clinical splitmouth study of cast gold vs. ceramic partial crowns: 5.5 year results. Am J Dent. 23:161–167
  • 27- Magne P, Stanley K, Schlichting LH. Modeling of ultra thin occlusal veneers. Dent Mater. 2012 Jul;28(7):777-82.
  • 28- Schlichting LH, Maia HP, Baratieri LN, Magne P. Novel-design ultra-thin CAD/CAM composite resin and ceramic occlusal veneers for the treatment of severe dental erosion. J Prosthet Dent. 2011 Apr;105(4):217-26.
  • 29- Öz FD. CAD/CAM sistemi ve yüksek ısıda presleme yöntemi ile üretilen porselen inleylerin kenar uyumu ve kırılma dayanıklılığı açısından değerlendirilmesi. Hacettepe Ü.Diş Hek.Fak. Sağlık Bil. Enst, Ankara, 2015
  • 30- Beuer F, Schweiger J, Edelhoff D. Digital dentistry: an overview of recent developments for CAD/CAM generated restorations. Br Dent J. 2008;204:505-11.
  • 31- Otto T, Schneider D. Long-term clinical results of chairside Cerec CAD/CAM inlays and onlays: a case series. Int J Prosthodont. 2008;21:53–9.
  • 32- Sensat ML, Brackett WW, Meinberg TA, Beatty MW. Clinical evaluation of two adhesive composite cements for the suppression of dentinal cold sensitivity. J Prosthet Dent 2002;88:50-53
  • 33- Taschner M, Frankenberger R, Garc´ıaGodoy F, et al: IPS empress inlays luted with a self-adhesive resin cement after 1 year. Am J Dent 2009;22:55-59
  • 34- Milleding P, Ortengren U, Karlsson S. Ceramic inlay systems: some clinical aspects. J Oral Rehabil. 1995;22:571–80.
  • 35- St-Georges AJ, Sturdevant JR, Swift Jr EJ, Thompson JY. Fracture resistance of prepared teeth restored with bonded inlay restorations. J Prosthet Dent. 2003;89:551–7.
  • 36- Reich SM, Wichmann M, Rinne H, Shortall A. Clinical performance of large, all-ceramic CAD/CAM-generated restorations after three years: a pilot study. J Am Dent Assoc. 2004;135:605–12
  • 37- Felden A, Schmalz G, Hiller KA. Retrospective clinical study and survival analysis on partial ceramic crowns: resultsupto 7 years. Clin Oral Investig. 2000;4:199– 205.
  • 38- Naeselius K, Arnelund CF, Molin MK. Clinical evaluation of all-ceramic onlays: a 4-year retrospective study. Int J Prosthodont. 2008;21:40–4.
  • 39- vanDijken JW, Hasselrot L, Ormin A, Olofsson AL. Restorations with extensive dentin/enamel-bonded ceramic coverage: A 5-year follow-up. Eur J Oral Sci. 2001;109:222–9.
  • 40- Federlin M, Wagner J, Manner T, Hiller KA, Schmalz G. Three-year clinical performance of cast gold vs ceramic partial crowns. Clin Oral Investig. 2007;11:345– 52.
  • 41- Felton D, Kanoy B, Bayne S Wirthman B. Effect of in vivo crown marjin discrepancies on periodontal health. J Prosthet Dent. 1991;65:357-64
  • 42- Lang N, Kiel R, Anderhalden K. Clinical and microbiological effects of subgingival restorations with overhanging or clinically perfect margins. J Clin Periodontol. 1983;6:563-78.
There are 42 citations in total.

Details

Primary Language Turkish
Journal Section Research Article
Authors

Deniz Yılmaz

Seda Durualp This is me

Semih Berksun This is me

Lale Karaağaçlıoğlu This is me

Publication Date August 1, 2017
Published in Issue Year 2017 Volume: 44 Issue: 3 - Volume: 44 Issue: 3

Cite

Vancouver Yılmaz D, Durualp S, Berksun S, Karaağaçlıoğlu L. Okluzal overley ve tam kronların klinik olarak değerlendirilmesi. EADS. 2017;44(3):155-66.