4-NAPHTHYL-3-THIOSEMICARBAZIDE AS CORROSION INHIBITOR FOR COPPER IN SEA WATER (3.5% SODUIM CHLORIDE)

Year 2020, Volume: 1 Issue: 1, 27 - 34, 03.11.2020

Mothana Ghazı Kadhım Alfalah Mohammed Abdulrazzaq Murat Saraçoğlu Fatma Kandemirli

Abstract

The effects of 4-NaTh-3-Thıosemicarbazide on the corrosion of Copper immersed in sea water has been evaluated. The inhibitor efficiency was determined by using three electrochemical techniques, Potential dynamic polarization (PDP), Impedance spectroscopy (EIS), and Open Circuite Potential (OCP) by using Potentiostat Instrument type compact stat (IVIUM) after immersion in sea water contain 3.5% Sodium chloride with presence and without corrosion inhibitor. A good inhibition efficiency is noticed which increases with an increase in corrosion inhibitor concentration. It was obtained that the inhibitor efficiency reached around 95% at 0,001 M from corrosion inhibitor. Both the cathodic and anodic curves are changed markedly in the presence of 4-NaTh-3-Thıosemıcarbazide. The mechanism of inhibition was proposed along the basis of the adsorption of the inhibitor molecules on the copper surface.

Keywords

4-NaTh-3-Thiosemicarbazide, Copper, Electrochemical Impedance spectroscopy, OCP

References

• [1] A. Lalitha, S. Ramesh, S. Rajeswari, “Surface protection of copper in acid medium by azoles and surfactants,”Electrochimica Acta, vol.51, no.1, pp.47–55, (2005).
• [2] A. Khiati, M. Sanchez-Moreno, M. Bernard, S. Joiret, “Corrosion inhibition of copper in neutral chloride media by a novel derivative of 1,2,4-triazole,” Corrosion Science, vol.53, no.10, pp.3092–3099, (2011).
• [3] Y.H.Wang, J.B. He, “Corrosion inhibition of copper by sodium phytate in NaOH solution:cyclic voltabsorptometry for in situ monitoring of soluble corrosion products,” Electrochimica Acta, vol.66, pp.45–51, (2012).
• [4] M. Petrovic Mihajlovic, M. Radovanovic, Z. Tasic, M. Antonijevic, “Imidazole based compounds as copper corrosion inhibitors in seawater,” Journal of Molecular Liquid, vol.225, pp.127–136, (2017).
• [5] S.K. Shukla, M.A. Quraishi, R. Prakash, “A self-doped conducting polymer “polyanthranilic acid”: an efficient corrosion inhibitor for mild steel in acidic solution”, Corrosion Science, vol.50, no.10, pp. 2867–2872, (2008).
• [6] M. Lashgar, A.M. Malek, “Fundamental studies of aluminum corrosion in acidic and basic environments: theoretical predictions and experimental observations,” Electrochimica Acta, vol.55, no.18, pp. 5253–5257, (2010).
• [7] M.M. Antonijevic, S.M. Milic, M.D. Dimitrijevic,M.B. Petrovic, M.B. Radovanovic, A.T. Stamenkovic, “The influence of pH and chloride ions on the electrochemical behavior of copper in the presence of benzotriazole,”International Journal Electrochemical Science, vol.7, pp.962–979, (2009).
• [8] M.B. Radovanović, M.M. Antonijević, “Protection of copper surface in acidic chloride solution by non-toxic thiadiazol Derivative,” Journal of Adhesion Science and Technology, vol.31, no.4, pp 369–387, (2016).
• [9] A. Lalitha, S. Ramesh and S. Rajeswari, “Surface protection of copper in acid medium by azoles and Surfactants,” Electrochimica Acta, vol.51, no.1, pp.47-55, (2005).
• [10] Gürten, A. A., Kayakırılmaz, K., & Erbil, M, “The effect of thiosemicarbazide on corrosion resistance of steel reinforcement in concrete,” Construction and Building Materials,vol. 21, no.3, pp. 669–676, (2007).
• [11] M. M. Singh, R. B. Rastogi, B. N. Upadhyay, and M. Yadav, “Thiosemicarbazide, phenyl isothiocyanate and their condensation product as corrosion inhibitors of copper in aqueous chloride solutions,” Materials Chemistry and Physics, vol. 80, no. 1. pp. 283–293, 2003.
• [12] Y. Santana Jiménez, M. Tejera Gil,M. Torrado Guerra, L.S. Baltes, J.C. Mirza Rosca, “Interpretation of open circuit potential of two titanium alloys for a long-time immersion in physiological fluid,” Bulletin of the Transylvania University of Brasov, vol.2, no. 51, pp.97–204, (2009).
• [13] T. Ramde, S. Rossi, and C. Zanella, “Inhibition of the Cu65/Zn35 brass corrosion by natural extract of Camellia sinensis,” Appl. Surf. Sci., vol. 307, pp. 209–216, 2014.
• [14] E.E. Oguzie, Y. Li, F.H. Wang, “Effect of 2-amino-3-mercaptopropanoic acid (cysteine) on the Corrosion behavior of low carbon steel in sulphuric acid,” Electrochimica Acta, vol.53, no.2, pp. 909– 914, (2007).
• [15] A. Fiala, W. Boukhedena, S. E. Lemallem, H. Brahim Ladouani, and H. Allal, “Inhibition of Carbon Steel Corrosion.in HCl and H2SO4 Solutions by Ethyl 2-Cyano-2-(1,3-dithian-2-ylidene) Acetate,” J. Bio- Tribo-Corrosion, vol. 5, no. 2, pp. 20–22, 2019.
• [16] C. B. P. Kumar, K. N. Mohana, and H. B. Muralidhara, “Electrochemical and thermodynamic studies to evaluate the inhibition effect of synthesized piperidine derivatives on the corrosion of mild steel in acidic medium,” Ionics (Kiel)., vol. 21, no. 1, pp. 263–281, 2015
• [17] S. Hong, W. Chen, H.Q. Luo, N.B. Li, “Inhibition effect of 4-amino-antipyrine on the corrosion of copper in 3wt.% NaCl solution,” Corrosion Science, vol.57, pp. 270–278, (2012).
• [18] D. Daoud, T. Douadi, H. Hamani, S. Chafaa, M. Al-Noaimi, “Corrosion inhibition of mild steel by two new S-heterocyclic compounds in 1 M HCl: experimental and computational study,” Corrosion Science, vol.94, pp. 21–37, (2015).
• [19] L. Guo, S. Zhu, S. Zhang, “Experimental and theoretical studies of benzalkonium chloride as an inhibitor for carbon steel corrosion in sulfuric acid,” Journal of Industrial Engineering Chemistry, vol.24, pp. 174–180, (2015).
• [20] R. Karthikaiselvi, S. Subhashini, “Study of adsorption properties and inhibition of mild steel corrosion in hydrochloric acid media by water soluble composite poly (vinyl alcohol-o-methoxy aniline),” J. Assoc. Arab Univ. Basic Appl. Sci., vol.16, pp.74–82, (2014).