Abstract
References
- Referans1: Vural, D., Gencer, C. and Karadoğan, D. (2014). Ulaştırma uygulamalarına yönelik çok modlu model önerisi. Savunma Bilimleri Dergisi, 13(1), pp. 75-105.
- Referans2: Çetin, T. and Akkaş, M. (2020). Effect of WC Reinforced on Microstructure and Mechanical Properties of CuAlMn Alloys Produced by Hot Pressing Method. European Journal of Technique, 10(1), pp. 173-183.
Abstract
This study was carried out to determine the microstructure and mechanical properties of S49 rail steel. For this purpose, firstly, three samples of S49 rail steel material were prepared by cutting by wire erosion method for three point bending test. Microstructural analyzes of S49 rail steel were examined by scanning electron microscopy (SEM). Energy dispersion spectrometer (EDS) analysis was performed to determine the chemical composition of the S49 rail steel material. Hardness test and three point bending test were performed to determine the mechanical properties of the samples. SEM and EDS analyzes of fractured surfaces were performed from the broken samples after the three point bending test.
References
- Referans1: Vural, D., Gencer, C. and Karadoğan, D. (2014). Ulaştırma uygulamalarına yönelik çok modlu model önerisi. Savunma Bilimleri Dergisi, 13(1), pp. 75-105.
- Referans2: Çetin, T. and Akkaş, M. (2020). Effect of WC Reinforced on Microstructure and Mechanical Properties of CuAlMn Alloys Produced by Hot Pressing Method. European Journal of Technique, 10(1), pp. 173-183.
Details
| Primary Language | English |
|---|---|
| Subjects | Material Production Technologies |
| Journal Section | Research Article |
| Authors | |
| Publication Date | June 1, 2021 |
| Published in Issue | Year 2021 |
All articles published by EJT are licensed under the Creative Commons Attribution 4.0 International License. This permits anyone to copy, redistribute, remix, transmit and adapt the work provided the original work and source is appropriately cited.