Research Article
BibTex RIS Cite
Year 2021, Volume: 11 Issue: 1, 43 - 46, 01.06.2021
https://doi.org/10.36222/ejt.812142

Abstract

References

  • Referans1: Vural, D., Gencer, C. and Karadoğan, D. (2014). Ulaştırma uygulamalarına yönelik çok modlu model önerisi. Savunma Bilimleri Dergisi, 13(1), pp. 75-105.
  • Referans2: Çetin, T. and Akkaş, M. (2020). Effect of WC Reinforced on Microstructure and Mechanical Properties of CuAlMn Alloys Produced by Hot Pressing Method. European Journal of Technique, 10(1), pp. 173-183.

EXPERIMENTAL INVESTIGATION OF THE MECHANICAL AND MICROSTRUCTURE PROPERTIES OF S49 RAIL STEEL

Year 2021, Volume: 11 Issue: 1, 43 - 46, 01.06.2021
https://doi.org/10.36222/ejt.812142

Abstract

This study was carried out to determine the microstructure and mechanical properties of S49 rail steel. For this purpose, firstly, three samples of S49 rail steel material were prepared by cutting by wire erosion method for three point bending test. Microstructural analyzes of S49 rail steel were examined by scanning electron microscopy (SEM). Energy dispersion spectrometer (EDS) analysis was performed to determine the chemical composition of the S49 rail steel material. Hardness test and three point bending test were performed to determine the mechanical properties of the samples. SEM and EDS analyzes of fractured surfaces were performed from the broken samples after the three point bending test.

References

  • Referans1: Vural, D., Gencer, C. and Karadoğan, D. (2014). Ulaştırma uygulamalarına yönelik çok modlu model önerisi. Savunma Bilimleri Dergisi, 13(1), pp. 75-105.
  • Referans2: Çetin, T. and Akkaş, M. (2020). Effect of WC Reinforced on Microstructure and Mechanical Properties of CuAlMn Alloys Produced by Hot Pressing Method. European Journal of Technique, 10(1), pp. 173-183.
There are 2 citations in total.

Details

Primary Language English
Subjects Material Production Technologies
Journal Section Research Article
Authors

Anıl Rıdvanoğulları 0000-0002-2652-7519

Tayfun Çetin 0000-0001-8060-344X

Mehmet Akkaş 0000-0002-0359-4743

Publication Date June 1, 2021
Published in Issue Year 2021 Volume: 11 Issue: 1

Cite

APA Rıdvanoğulları, A., Çetin, T., & Akkaş, M. (2021). EXPERIMENTAL INVESTIGATION OF THE MECHANICAL AND MICROSTRUCTURE PROPERTIES OF S49 RAIL STEEL. European Journal of Technique (EJT), 11(1), 43-46. https://doi.org/10.36222/ejt.812142

All articles published by EJT are licensed under the Creative Commons Attribution 4.0 International License. This permits anyone to copy, redistribute, remix, transmit and adapt the work provided the original work and source is appropriately cited.Creative Commons Lisansı