Taguchi optimization of impact, tensile and bending properties of carbon and basalt fabric reinforced epoxy composite

Ertan Özgür; Emel Ceyhun Sabır

doi:10.26701/ems.1650153

Taguchi optimization of impact, tensile and bending properties of carbon and basalt fabric reinforced epoxy composite

Abstract

In this study, epoxy composites with different reinforcement ratios of basalt and carbon fabric were produced. Al2O3 and SiC powders were added to the resin at different ratios. Reinforcements were not used in hybrid form. Each composite contains basalt or carbon fabric as fabric. Fabric reinforcement was determined as 30%, 40% and 50% by weight and powder addition was determined as 0%, 2% and 4% for Al2O3 and 0%, 5% and 10% for SiC. Izod pendulum impact strength test, tensile strength test and three-point bending test, which have different importance in different areas of use for composite materials and are the most researched mechanical properties, were selected. Taguchi experimental design (Mixed 3-6 Level) optimization technique was selected for the optimization of mechanical properties. The optimum Izod Pendulum Impact strength was obtained from the composite with 50% basalt reinforcement and 4% Al2O3 and 5% SiC. In the matrix, the optimum tensile strength was obtained from the composite with 50% basalt reinforcement and no Al2O3 and SiC in the matrix and the optimum Three Point Bending value was obtained from the composite with 30% carbon reinforcement and 2% Al2O3 and 5% SiC in the matrix. Comparison tests were carried out for this result and these results support the Taguchi analysis.

Keywords

Supporting Institution

Çukurova University Scientific Research Projects Unit

Project Number

Project ID: FDK-2017-8490

Ethical Statement

Ethical approval not required.

Thanks

As authors, we would like to thank Çukurova University Scientific Research Projects Unit for the project support in this study

References

Van de Velde, K., Kiekens, P., & Van Langenhove, L. (2003). Basalt fibres as reinforcement for composites. Proceedings of 10th International Conference on Composites/Nano Engineering, University of New Orleans, New Orleans, LA, USA (Vol. 2026).
Singha, K. (2012). A short review on basalt fiber. International Journal of Textile Science, 1(4), 19-28.
Gilewicz, P., Dominiak, J., Cichocka, A., & Frydrych, I. (2013). Change in structural and thermal properties of textile fabric packages containing basalt fibres after fatigue bending loading. Fibres & Textiles in Eastern Europe, 21(5(101)), 80-84.
Dalinkevich, A. A., Gumargalieva, K. Z., Marakhovsky, S. S., & Soukhanov, A. V. (2009). Modern basalt fibrous materials and basalt fiber-based polymeric composites. Journal of Natural Fibers, 6(3), 248-271. https://doi.org/10.1080/15440470903123173
Ovalı, S. (2015). Bazalt lifi ve dolgu malzemesi takviyeli termoplastik esaslı kompozit yapıların ısı ve ses yalıtım özelliklerinin incelenmesi (Yüksek Lisans Tezi). Marmara Üniversitesi, Fen Bilimleri Enstitüsü, Tekstil Mühendisliği Anabilim Dalı.
Chuvashov, Y., Jashchenko, O., Diduk, I., & Gulik, V. (2020). The investigation of fiber surface condition from basalt-like rocks for enhanced industrial applications. Journal of Natural Fibers. https://doi.org/10.1080/15440478.2020.1838987
Nayak, R. K., Dasha, A., & Ray, B. C. (2014). Effect of epoxy modifiers (Al2O3/SiO2/TiO2) on mechanical performance of epoxy/glass fiber hybrid composites. Procedia Materials Science, 6, 1359–1364.
Agarwal, G., Patnaik, A., & Sharma, R. K. (2013). Thermo-mechanical properties of silicon carbide-filled chopped glass fiber-reinforced epoxy composites. International Journal of Advanced Structural Engineering, 5, 21.

Bulut, M. (2018). Vibration analysis of carbon and Kevlar fiber reinforced composites containing SiC particles. Sakarya University Journal of Science, 22(5), 1423-1431.
Prasanna, S. M., Vitala, H. R., Madhusudhan, T., & Raju, B. R. (2016). Evaluation of mechanical and tribological characterization of glass-basalt hybrid composites. International Journal of Engineering Research and Advanced Technology (IJERAT), Special Volume, 02(01).
Vaidya, R. U., & Rangaswamy, T. (2017). A review on E-glass/epoxy composite combined with various filler materials and its mechanical behaviour under different thermal conditions. American Journal of Materials Science, 7(4), 83-90.
Kaybal, H. B., Ulus, H., & Avcı, A. (2016). Characterization of tensile properties and toughness mechanisms on nano-Al2O3 epoxy nanocomposites. International Journal of Innovative Research in Science, Engineering and Technology, 5(Special Issue 12).
Savaşkan, M., Taptık, Y., & Ürgen, M. (2004). Deney tasarımı yöntemi ile matkap uçlarında performans optimizasyonu. İTÜ Dergisi D: Mühendislik, 3(6), 117-128.
Özgür, E. (2022). Production of basalt, carbon fabric reinforced particle additive composites and optimization of mechanical, thermal and sound insulation properties (Doctoral dissertation). University of Çukurova, Institute of Natural and Applied Sciences, Department of Textile Engineering. (In Turkish: Bazalt, karbon kumaş takviyeli parçacık katkılı kompozitlerin üretimi ve mekanik, ısı ve ses yalıtım özelliklerinin optimizasyonu)
Özgür, E., Sabir, E. C., & Sarpkaya, Ç. (2023). Multi-objective optimization of thermal and sound insulation properties of basalt and carbon fabric reinforced composites using the Taguchi grey relations analysis. Journal of Natural Fibers, 20(1), Article 2178580. https://doi.org/10.1080/15440478.2023.2178580
Gümülcine, T., Bekem, A., Doğu, M., Gemici, Z., & Ünal, A. (2013). İzoftalik polyester matrisli sürekli E-camı ve bazalt fiber takviyeli kompozitlerin mekanik özellikleri üzerine deneysel bir çalışma. Mühendislik ve Fen Bilimleri Dergisi, 104-115.
Seydibeyoğlu, M. Ö., Doğru, A., Wang, J., Rencheck, M., Han, Y., Wang, L., Seydibeyoğlu, E. A., Zhao, X., Ong, K., Shatkin, J. A., Shams Es-haghi, S., Bhandari, S., Özcan, S., & Gardner, D. J. (2023). Review on hybrid reinforced polymer matrix composites with nanocellulose, nanomaterials, and other fibers. Polymers, 15(4), 984. https://doi.org/10.3390/polym15040984
Sarpkaya, Ç., Sabır, E. C., & Özgür, E. (2024). Multi-objective optimization of selected mechanical properties of basalt, carbon fabric reinforced particle additive composites. Textile and Apparel, 34(3), 211–221. https://doi.org/10.32710/tekstilvekonfeksiyon.1260944

Details

Primary Language

English

Subjects

Optimization Techniques in Mechanical Engineering , Industrial Engineering , Manufacturing Processes and Technologies (Excl. Textiles)

Journal Section

Research Article

Authors

Ertan Özgür
0000-0001-6293-0690
Türkiye

Emel Ceyhun Sabır ^*
0000-0002-2385-1524
Türkiye

Publication Date

September 20, 2025

Submission Date

March 3, 2025

Acceptance Date

June 16, 2025

Published in Issue

Year 2025 Volume: 9 Number: 3

DOI

https://doi.org/10.26701/ems.1650153

IZ

https://izlik.org/JA23FM63WJ

Cite

RIS / Bibtex

APA

Özgür, E., & Sabır, E. C. (2025). Taguchi optimization of impact, tensile and bending properties of carbon and basalt fabric reinforced epoxy composite. European Mechanical Science, 9(3), 207-213. https://doi.org/10.26701/ems.1650153