Research Article
BibTex RIS Cite
Year 2019, , 147 - 152, 20.12.2019
https://doi.org/10.26701/ems.572272

Abstract

References

  • [1] Usta, S.E. (2011). Experimental and quantitative analysis of influence of internal combustion engine exhaust manifold structure on engine performance, Gazi University, Institute of science and technology, Ankara-Turkey.
  • [2] Umesh, K.S., Pravin, V.K., Rajagopal, K. (2013). CFD analysis of exhaust manifold of multi-cylinder SI engine to determine optimal geometry for reducing emissions, International Journal of Automobile Engineering Research and Development (IJAuERD), 3(4): 45-56.
  • [3] Bajpai, K., Chandrakar, A., Agrawal, A., Shekhar, S. (2017). CFD analysis of exhaust manifold of SI engine and comparison of back pressure using alternative fuels, IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE), 14 (1): 23-29.
  • [4] Navadagi, V., Sangamad, S. (2014). CFD analysis of exhaust manifold of multi-cylinder petrol engine for optimal geometry to reduce back pressure, International Journal of Engineering Research & Technology (IJERT), 3 (3): 92-97.
  • [5] Manikandan, P., Durai, A.S., Kumar, S.S., Kumar, R.S., Krishnan, M.N. (2019). CFD analysis of Exhaust manifold, South Asian Journal of Engineering and Technology, 8(2): 257-261.
  • [6] Venkatesan, S.P., Ganesan, S., Devaraj, R., Hemanandh, J. (2018). Design and analysis of exhaust manifold of the spark ignition engine for emission reduction, International Journal of Ambient Energy, 1-6, https://doi.org/10.1080/01430750.2018.1484811
  • [7] Aswatha, B.B., , Seetharamu, K.N. (2017). CFD analysis of exhaust manifold of a multi-cylinder engine, International Journal of Electronics, Electrical and Computational System (IJEECS), 6 (8): 578-587.
  • [8] Mogulappa, V.G., Ramesh, G. (2017). CFD analysis in exhaust manifold in engines, International Journal of Engineering Science & Advanced Technology (IJESAT), 7 (1): 32-44.
  • [9] Yadav, K.M., Prasad, N.V. (2017). Design and Optimization of Exhaust Manifold by using Finite Element Analysis, International Journal of Innovative Technologies (IJITECH), 5 (11):2162-2168.
  • [10] Teja, M.A., Ayyappa, K., Katam, S., Anusha, P. (2016). Analysis of exhaust manifold using computational fluid dynamics, Fluid Mechanics: Open Access, 3 (1): 1-16.
  • [11] Kesgin, U. (1999). The effect of geometries of inlet and exhaust systems on the performance characteristics of a multicylinder engine, Dokuz Eylul University Faculty Of Engineering Journal Of Science and Engineering, 1 (1): 1-10.
  • [12] Kanawade, N., Siras, O. (2016). A literature review on exhaust manifold design, International Journal of Scientific Research Engineering & Technology (IJSRET), 5 (5): 286-289.
  • [13] Chaudhari, S.G., Borse, P.N., Nikam, P.S. (2017). Design of exhaust manifold to improve performance of IC engine- A review, International Journal of Recent Innovation in Engineering and Research (IJRIER), 2 (4): 41-46.
  • [14] Girish, L., Gowreesh, S.S., Kousik, S. (2016). Computational analysis of a multi-cylinder four stroke SI engine exhaust manifold system, International Journal of Engineering and Advanced Technology (IJEAT), 5 (5): 121-126.
  • [15] Martínez-Martínez, S., Leal-Garza, R.D., Sánchez-Cruz, F.A., Villarreal, E.B., Amado-Covarrubias, M. (2010). CFD analysis of the effect of the exhaust manifold design on the close-coupled catalytic converter performance, Journal of KONES Powertrain and Transport, 17 (4): 303-311.
  • [16] Prakash, D., David, S., Dhanasekar, V., Pragadeeswaran, T. (2017). Design and analysis of exhaust manifold for a car engine, International Journal of Research and Engineering (IJRE), 4 (6): 174-176.
  • [17] Krishnara, J., Ruban, S.R., Subramani, N. (2018). Analysis of exhaust manifold to improve the engine performance, International Journal of Engineering & Technology, 7 (2): 539-542.

CFD Analysis of Exhaust Manifold for Different Designs

Year 2019, , 147 - 152, 20.12.2019
https://doi.org/10.26701/ems.572272

Abstract

The exhaust manifold is an important component,
although it appears to be simple among engine parts. The effective efficiency
and performance of the engine affect many parameters such as the diameter,
length, material and geometry of the exhaust manifold. In the study presented,
commonly used two manifold designs were drawn in the SOLIDWORKS software. Then,
this manifolds were transferred to the ABAQUS V6.13 software.  The physical properties of gasoline, alcohol
and LPG are used as fluid flow for each manifold. In the analysis, the
pressure, velocity and temperature changes of the manifolds are determined at
the measured points. Gasoline fluid is lower pressure and velocity than the
other two fuels in the type A and type B exhaust manifold. The type A exhaust
manifold compared to type B manifold, higher pressures have been reached in all
three fuels. Therefore, the performance and efficiency of the engine can be
increased with A type manifold.   

References

  • [1] Usta, S.E. (2011). Experimental and quantitative analysis of influence of internal combustion engine exhaust manifold structure on engine performance, Gazi University, Institute of science and technology, Ankara-Turkey.
  • [2] Umesh, K.S., Pravin, V.K., Rajagopal, K. (2013). CFD analysis of exhaust manifold of multi-cylinder SI engine to determine optimal geometry for reducing emissions, International Journal of Automobile Engineering Research and Development (IJAuERD), 3(4): 45-56.
  • [3] Bajpai, K., Chandrakar, A., Agrawal, A., Shekhar, S. (2017). CFD analysis of exhaust manifold of SI engine and comparison of back pressure using alternative fuels, IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE), 14 (1): 23-29.
  • [4] Navadagi, V., Sangamad, S. (2014). CFD analysis of exhaust manifold of multi-cylinder petrol engine for optimal geometry to reduce back pressure, International Journal of Engineering Research & Technology (IJERT), 3 (3): 92-97.
  • [5] Manikandan, P., Durai, A.S., Kumar, S.S., Kumar, R.S., Krishnan, M.N. (2019). CFD analysis of Exhaust manifold, South Asian Journal of Engineering and Technology, 8(2): 257-261.
  • [6] Venkatesan, S.P., Ganesan, S., Devaraj, R., Hemanandh, J. (2018). Design and analysis of exhaust manifold of the spark ignition engine for emission reduction, International Journal of Ambient Energy, 1-6, https://doi.org/10.1080/01430750.2018.1484811
  • [7] Aswatha, B.B., , Seetharamu, K.N. (2017). CFD analysis of exhaust manifold of a multi-cylinder engine, International Journal of Electronics, Electrical and Computational System (IJEECS), 6 (8): 578-587.
  • [8] Mogulappa, V.G., Ramesh, G. (2017). CFD analysis in exhaust manifold in engines, International Journal of Engineering Science & Advanced Technology (IJESAT), 7 (1): 32-44.
  • [9] Yadav, K.M., Prasad, N.V. (2017). Design and Optimization of Exhaust Manifold by using Finite Element Analysis, International Journal of Innovative Technologies (IJITECH), 5 (11):2162-2168.
  • [10] Teja, M.A., Ayyappa, K., Katam, S., Anusha, P. (2016). Analysis of exhaust manifold using computational fluid dynamics, Fluid Mechanics: Open Access, 3 (1): 1-16.
  • [11] Kesgin, U. (1999). The effect of geometries of inlet and exhaust systems on the performance characteristics of a multicylinder engine, Dokuz Eylul University Faculty Of Engineering Journal Of Science and Engineering, 1 (1): 1-10.
  • [12] Kanawade, N., Siras, O. (2016). A literature review on exhaust manifold design, International Journal of Scientific Research Engineering & Technology (IJSRET), 5 (5): 286-289.
  • [13] Chaudhari, S.G., Borse, P.N., Nikam, P.S. (2017). Design of exhaust manifold to improve performance of IC engine- A review, International Journal of Recent Innovation in Engineering and Research (IJRIER), 2 (4): 41-46.
  • [14] Girish, L., Gowreesh, S.S., Kousik, S. (2016). Computational analysis of a multi-cylinder four stroke SI engine exhaust manifold system, International Journal of Engineering and Advanced Technology (IJEAT), 5 (5): 121-126.
  • [15] Martínez-Martínez, S., Leal-Garza, R.D., Sánchez-Cruz, F.A., Villarreal, E.B., Amado-Covarrubias, M. (2010). CFD analysis of the effect of the exhaust manifold design on the close-coupled catalytic converter performance, Journal of KONES Powertrain and Transport, 17 (4): 303-311.
  • [16] Prakash, D., David, S., Dhanasekar, V., Pragadeeswaran, T. (2017). Design and analysis of exhaust manifold for a car engine, International Journal of Research and Engineering (IJRE), 4 (6): 174-176.
  • [17] Krishnara, J., Ruban, S.R., Subramani, N. (2018). Analysis of exhaust manifold to improve the engine performance, International Journal of Engineering & Technology, 7 (2): 539-542.
There are 17 citations in total.

Details

Primary Language English
Subjects Mechanical Engineering
Journal Section Research Article
Authors

Ömer Cihan 0000-0001-8103-3063

Mehmet Bulut 0000-0002-0705-6555

Publication Date December 20, 2019
Acceptance Date September 18, 2019
Published in Issue Year 2019

Cite

APA Cihan, Ö., & Bulut, M. (2019). CFD Analysis of Exhaust Manifold for Different Designs. European Mechanical Science, 3(4), 147-152. https://doi.org/10.26701/ems.572272

Dergi TR Dizin'de Taranmaktadır.

Flag Counter