Research Article
BibTex RIS Cite

Vehicle Loading Conditions’ Influence Over Front Lighting Requirements and Dipped Beam Vertical Leveling Control Method

Year 2019, Volume: 3 Issue: 2, 75 - 82, 20.06.2019
https://doi.org/10.26701/ems.464441

Abstract




This study evaluates the effects of the vehicle body
inclination changes on the cut-off (the transition between the lighter and
darker portions of the beam) vertical position of dipped beam which is one of
the main functions of the headlamp. The functionality of headlamp vertical
aiming system and its importance for the driving safety are examined. In case
of any change on the vehicle, which effects to the vehicle inclination values, a
control method is defined in order to check suitability of cut-off vertical
position for every loading conditions defined by regulations. In addition, the calculations
are formulated to find required vertical aiming values in order to keep the
cut-off position in the range of minimum to maximum values defined by the
regulations are formulated.




It is concluded that after heavy accessory/configuration
changes, major modifications, or new version of model aplications on the vehicle
make necessary to be checked availability of actual cut-off vertical positions
and output values of the headlamp aiming software. In case of aiming software
update necessities, new values based on regulated loading conditions can be
defined by following formulations.




References

  • [1] M. S. V. R. Tom K. Philip, «DESIGN OF AN AUTOMOTIVE HEADLAMP CONSIDERING STYLE AND PERFOMANCE,» SASTECH Journal, cilt 12, no. 2, 2013.
  • [2] United Nations Economic Commission for Europe Vehicle Regulations, Reg. 48 - Rev.7.
  • [3] Chung-YuTsai, «Design offree-formreflectorforvehicleLEDlow-beamheadlamp,» Optics Communications, 2016.
  • [4] T. Targosinski, «IMPORTANCE OF CUT-OFF LINE,» Journal of KONES Powertrain and Transport, cilt 19, no. 3, 2012.
  • [5] United Nations Economic Commission for Europe Vehicle Regulations, Reg. 112 - Rev.2.
  • [6] «HOT ROD Hotline,» [Çevrimiçi]. Available: https://www.hotrodhotline.com/headlights-part-2-lowhigh-beams.
  • [7] F. C. Automobiles, EGEA User Manual, 2016.
  • [8] Official Journal of the European Union - Directive 2007/46/EC.
Year 2019, Volume: 3 Issue: 2, 75 - 82, 20.06.2019
https://doi.org/10.26701/ems.464441

Abstract

References

  • [1] M. S. V. R. Tom K. Philip, «DESIGN OF AN AUTOMOTIVE HEADLAMP CONSIDERING STYLE AND PERFOMANCE,» SASTECH Journal, cilt 12, no. 2, 2013.
  • [2] United Nations Economic Commission for Europe Vehicle Regulations, Reg. 48 - Rev.7.
  • [3] Chung-YuTsai, «Design offree-formreflectorforvehicleLEDlow-beamheadlamp,» Optics Communications, 2016.
  • [4] T. Targosinski, «IMPORTANCE OF CUT-OFF LINE,» Journal of KONES Powertrain and Transport, cilt 19, no. 3, 2012.
  • [5] United Nations Economic Commission for Europe Vehicle Regulations, Reg. 112 - Rev.2.
  • [6] «HOT ROD Hotline,» [Çevrimiçi]. Available: https://www.hotrodhotline.com/headlights-part-2-lowhigh-beams.
  • [7] F. C. Automobiles, EGEA User Manual, 2016.
  • [8] Official Journal of the European Union - Directive 2007/46/EC.
There are 8 citations in total.

Details

Primary Language English
Subjects Mechanical Engineering
Journal Section Research Article
Authors

Ahmet Rodoplu

Hatice Özbek This is me

Caner Çil This is me

Publication Date June 20, 2019
Acceptance Date May 14, 2019
Published in Issue Year 2019 Volume: 3 Issue: 2

Cite

APA Rodoplu, A., Özbek, H., & Çil, C. (2019). Vehicle Loading Conditions’ Influence Over Front Lighting Requirements and Dipped Beam Vertical Leveling Control Method. European Mechanical Science, 3(2), 75-82. https://doi.org/10.26701/ems.464441

Dergi TR Dizin'de Taranmaktadır.

Flag Counter