A Comprehensive Review on Fuel Cells: From Fundamental Principles to PEM Fuel Cell Membranes

Turan Alp Arslan; Hüseyin Bayrakçeken

doi:10.64808/engineeringperspective.1791743

A Comprehensive Review on Fuel Cells: From Fundamental Principles to PEM Fuel Cell Membranes

Abstract

Fuel cells have a wide range of potential applications in various fields such as stationary power generation, transportation, and portable electronic devices, thanks to their high energy conversion efficiencies, environmentally friendly structures, and simple design features. This study takes a comprehensive approach to fuel cell technologies, starting with the fundamental operating principles and historical development process of fuel cells. Different systems, such as alkaline fuel cells (AFC), phosphoric acid fuel cells (PAFC), solid oxide fuel cells (SOFC), molten carbonate fuel cells (MCFC), proton exchange membrane fuel cells (PEMFC), and direct methanol fuel cells (DMFC), are examined and compared in detail in terms of their operating principles, advantages, limitations, and application areas. Furthermore, the theoretical performance limits of fuel cells and the losses observed in the systems are analyzed, and improvement strategies to reduce these losses are dis-cussed. Special emphasis is placed on PEMFC technology due to its high potential in automotive and portable energy sys-tems. In this context, the structural components of PEMFCs, types of proton exchange membranes, and the main character-istics expected from these membranes are comprehensively addressed. To better understand proton transfer processes, pro-ton transfer mechanisms such as Grotthuss, vehicle, and surface mechanisms are also explained in detail. In conclusion, this review aims to establish a conceptual bridge between the fundamental principles of fuel cell technologies and the current challenges and advances in PEMFC membrane development research.

Keywords

Supporting Institution

Afyon Kocatepe University Projects of Scientific Investigation Unit (BAP)

Project Number

24.FEN.BIL.12

Ethical Statement

This article is based on previously published literature and does not include any studies involving human participants or animals conducted by the authors. Therefore, ethical approval and informed consent were not required.

Thanks

This study was supported by Afyon Kocatepe University Projects of Scientific Investigation Unit (BAP) with project number 24.FEN.BIL.12. The authors thank to Afyon Kocatepe (BAP) for this work.

References

1. Kocakulak, T., Solmaz, H., Taşkın, G., Tabanlıgil Calam, T., Şahin, F., Calam, A., & et al. (2025). Enhanced synthesis and optimization of sulfonated polysulfone nanocomposite membranes with hexagonal boron nitride and functionalized carbon nanotubes. Inorganic Chemistry Communications, 179, 114867. https://doi.org/10.1016/j.inoche.2025.114867
2. International Energy Agency. (2024). World Energy Outlook 2024. Paris, France: IEA.
3. Savaş, A., & Uslu, S. (2025). Optimization of diethyl ether-modified sesame biodiesel-diesel fuel blends for enhanced engine performance and emission mitigation. International Journal of Automotive Science and Technology, 9(3), 294-304. https://doi.org/10.30939/ijastech..1724235
4. Friedlingstein, P., O’Sullivan, M., Jones, M. W., Andrew, R. M., Hauck, J., Landschützer, P., & et al. (2025). Global carbon budget 2024. Earth System Science Data, 17, 965-1039. https://doi.org/10.5194/essd-17-965-2025
5. Arslan, T. A., & Kocakulak, T. (2023). A comprehensive review on Stirling engines. Engineering Perspective, 3(3), 42-56. http://dx.doi.org/10.29228/eng.pers.66847
6. Ali, R., Yücesu, H. S., Calam, A., & Solmaz, H. (2025). Detailed experimental analysis of combustion characteristics of port fuel injected HCCI engine with n-butanol DEE blends for emission reduction. Energy, 333, 137474. https://doi.org/10.1016/j.energy.2025.137474
7. Calam, A., Ali, R., & Solmaz, H. (2025). Impact of acetone-butanol-ethanol ternary fuel on combustion and emissions in a low-temperature combustion engine with variable compression ratio. Energy Conversion and Management, 343, 120194. https://doi.org/10.1016/j.enconman.2025.120194
8. Güler, Ö. F. (2025). Working fluid selection and performance analysis for the Afyon geothermal energy plant. Engineering Perspective, 5(1), 1-8. http://dx.doi.org/10.29228/eng.pers.80205

9. Haidar, F., Mrad, I., & Dam, Q. T., (2024). Modeling and simulation of integrated photovoltaic-alkaline electrolyzer system for sustainable hydrogen production. Engineering Perspective, 4(2), 60-68. http://dx.doi.org/10.29228/eng.pers.76380
10. Sebbani, I., Ettouhami, M. K., & Boulakhbar, M. (2025). Fuel cells: A technical, environmental, and economic outlook. Cleaner Energy Systems, 10, 100168. https://doi.org/10.1016/j.cles.2024.100168
11. Haynes, C. (2001). Clarifying reversible efficiency misconceptions of high temperature fuel cells in relation to reversible heat engines. Journal of Power Sources, 92(1-2), 199-203. https://doi.org/10.1016/S0378-7753(00)00541-3
12. Navinkumar T. M., & Bharatiraja, C. (2025). Sustainable hydrogen energy fuel cell electric vehicles: A critical review of system components and innovative development recommendations. Renewable and Sustainable Energy Reviews, 215, 115601. https://doi.org/10.1016/j.rser.2025.115601
13. Solmaz, H., Arslan, T. A., & Kocakulak, T. (2024). Modeling of an electrically driven PEM fuel cell bus. In Proceedings on 5th Borobudur International Symposium on Science and Technology (BIS-STE) 2023, V124009. https://doi.org/10.31603/biseeng.31
14. Manzo, D., Thai, R., Le, H. T., & Venayagamoorthy, G. K. (2025). Fuel cell technology review: Types, economy, applications, and vehicle-to-grid scheme. Sustainable Energy Technologies and Assessments, 75, 104229. https://doi.org/10.1016/j.seta.2025.104229
15. Yavuz, B. N., & Kahraman, H. (2023). Performance analysis of geometric properties of fuel cell components. International Journal of Automotive Science and Technology, 7(1), 11-17. https://doi.org/10.30939/ijastech..1221999
16. Khoiruddin, K., Nandar, C. S. A., Kawi, S., Lim, T. M., & Wenten, I. G. (2025). Advanced proton exchange membranes for high-efficiency fuel cells: material innovations and durability optimization. Energy Materials, 5, 500141. https://doi.org/10.20517/energymater.2025.62
17. Kocakulak, T., Taşkın, G., Tabanlıgil Calam, T., Solmaz, H., Calam, A., Arslan, T. A. & et al. (2024). A new nanocomposite membrane based on sulfonated polysulfone boron nitride for proton exchange membrane fuel cells: Its fabrication and characterization. Fuel, 374, 132476. https://doi.org/10.1016/j.fuel.2024.132476
18. Abokhalil, A. G., Alobaid, M., & Makky, A. A. (2023). Innovative approaches to enhance the performance and durability of proton exchange membrane fuel cells. Energies, 16(14), 5572. https://doi.org/10.3390/en16145572
19. Bhuiyan, M. M. H., & Siddique, Z. (2025). Hydrogen as an alternative fuel: A comprehensive review of challenges and opportunities in production, storage, and transportation. International Journal of Hydrogen Energy, 102, 1026-1044. https://doi.org/10.1016/j.ijhydene.2025.01.033
20. Kocakulak, T., & Arslan, T. A. (2023). Investigation of the use of fuel cell hybrid systems for different purposes. Engineering Perspective, 3(1), 1-8. http://dx.doi.org/10.29228/eng.pers.68466
21. Tanış, İ., Arslan, T. A., Kocakulak, T., Taşkın, G., Tabanlıgil Calam, T., & Solmaz, H. (2024). Fabrication and characterisation of sulfonated polysulfone membrane with different thicknesses for proton exchange membrane fuel cell. Engineering Perspective, 4(3), 100-107. http://dx.doi.org/10.2922 8/eng.pers.77899
22. Helsel, N., & Choudhury, P. (2025). Non-platinum group metal oxygen reduction catalysts for a hydrogen fuel cell cathode: A mini-review. Catalysts, 15(6), 588. https://doi.org/10.3390/catal15060588
23. Kurtz, J., Ma, Z., Saur, G., Wrubel, J. A., Mount, R., & Hammond, S. (2023). Analysis of hydrogen infrastructure for the feasibility, economics, and sustainability of a fuel cell powered data center. Sustainable Energy Technologies and Assessments, 58, 103357. https://doi.org/10.1016/j.seta.2023.103357
24. Alibash, T. A. A., & Kuşdoğan Ş. (2024). Overview of fuel cell-hybrid power sources vehicle technology: A review. International Journal of Automotive Science and Technology, 8(3), 260-272. https://doi.org/10.30939/ijastech..1432215
25. Walkowiak-Kulikowska, J., Wolska, J., & Koroniak, H. (2017). Polymers application in proton exchange membranes for fuel cells (PEMFCs). Physical Sciences Reviews, 2(8), 20170018. https://doi.org/10.1515/psr-2017-0018
26. Lucia, U. (2014). Overview on fuel cells. Renewable and Sustainable Energy Reviews, 30, 164-169. https://doi.org/10.1016/j.rser.2013.09.025
27. Katz, E. (2022). Electrochemical contributions: Christian Friedrich Schönbein (1799-1868). Electrochemical Science Advances, 2(1), e2160007. https://doi.org/10.1002/elsa.202160007
28. Grove, W. R. (1838). LVI. On a new voltaic combination. The London, Edinburgh, and Dublin Philosophical Magazine and Journal of Science, 13(84), 430-431. https://doi.org/10.1080/14786443808649618
29. Katz, E. (2024). Electrochemical contributions: Ludwig Mond (1839-1909). Electrochemical Science Advances, 4(2), e2400002. https://doi.org/10.1002/elsa.202400002
30. Gençoğlu, M. T., & Ural, Z. (2009). Design of a PEM fuel cell system for residential application. International Journal of Hydrogen Energy, 34(12), 5242-5248. https://doi.org/10.1016/j.ijhydene.2008.09.038
31. Harold, D., & Wallace, J. (2019). Fuel cells: A challenging history. Substantia, 3(2), 83-97. https://doi.org/10.13128/Substantia-277
32. Burke, K. A. (2003). Fuel cells for space science applications. First International Energy Conversion Engineering Conference, 17–21 August, Portsmouth, VA, USA, 1–10.
33. Rajashekara, K. (1994). History of electric vehicles in general motors. IEEE Transactions on Industy Applications, 30(4), 897- 904. https://doi.org/10.1109/28.297905
34. Curtin, D. E., Lousenberg, R. D., Henry, T. J., Tangeman, P. C., & Tisack, M. E. (2004). Advanced materials for improved PEMFC performance and life. Journal of Power Sources, 131(1-2), 41-48. https://doi.org/10.1016/j.jpowsour.2004.01.023
35. Hepbaşlı, A., & Kalıncı, Y. (2009). A review of heat pump water heating systems. Renewable and Sustainable Energy Reviews, 13(6-7), 1211-1229. https://doi.org/10.1016/j.rser.2008.08.002
36. Tarasenko, A. B., Kiseleva, S. V., & Popel, O. S. (2022). Hydrogen energy pilot introduction - technology competition. International Journal of Hydrogen Energy, 47(23), 11991-11997. https://doi.org/10.1016/j.ijhydene.2022.01.242
37. Chatterjee, D., & Mitra, A. (2006). Ruthenium polyaminocarboxylate complexes. Platinum Metals Review, 50(1), 2-12. https://doi.org/10.1595/147106705X82874
38. Stolzenburg, K., Tsatsami, V., & Grubel, H. (2009). Lessons learned from infrastructure operation in the CUTE project. International Journal of Hydrogen Energy, 34(16), 7114-7124. https://doi.org/10.1016/j.ijhydene.2008.06.035
39. Andújar, J. M., & Segura, F. (2009). Fuel cells: History and updating. A walk along two centuries. Renewable and Sustainable Energy Reviews, 13(9), 2309-2322. https://doi.org/10.1016/j.rser.2009.03.015
40. Nonobe, Y. (2017). Development of the fuel cell vehicle Mirai. IEEJ Transactions on Electrical and Electronic Engineering, 12(1), 5-9. https://doi.org/10.1002/tee.22328
41. Wang, Y., Chen, K. S., Mishler, J., Cho, S. C., & Adroher, X. C. (2011). A review of polymer electrolyte membrane fuel cells: Technology, applications, and needs on fundamental research. Applied Energy, 88(4), 981-1007. https://doi.org/10.1016/j.apenergy.2010.09.030
42. Qasem, N. A. A., & Abdulrahman, G. A. Q. (2024). A recent comprehensive review of fuel cells: History, types, and applications. International Journal of Energy Research, 2024(1), 7271748. https://doi.org/10.1155/2024/7271748
43. Alaswad, A., Omran, A., Sodre, J. R., Wilberforce, T., Pignatelli, G., Dassisti, M., & et al. (2021). Technical and commercial challenges of proton-exchange membrane (PEM) fuel cells. Energies, 14, 144. https://doi.org/10.3390/en14010144
44. Islam, M. R., Shabani, B., Rosengarten, G., & Andrews, J. (2015). The potential of using nanofluids in PEM fuel cell cooling systems: A review. Renewable and Sustainable Energy Reviews, 48, 523-539. https://doi.org/10.1016/j.rser.2015.04.018
45. Alizadeh, E., Rahgoshay, S. M., Rahimi-Esbo, M., Khorshidian, M., & Saadat, S. H. M. (2016). A novel cooling flow field design for polymer electrolyte membrane fuel cell stack. International Journal of Hydrogen Energy, 41(20), 8525-8532. https://doi.org/10.1016/j.ijhydene.2016.03.187
46. Erdinç, O., & Uzunoğlu, M. (2010). Recent trends in PEM fuel cell-powered hybrid systems: Investigation of application areas, design architectures and energy management approaches. Renewable and Sustainable Energy Reviews, 14(9), 2874-2884. https://doi.org/10.1016/j.rser.2010.07.060
47. Khzouz, M., Gkanas, E. I., Shao, J., Sher, F., Behersky, D., El-Kharouf, A., & et al. (2020). Life cycle costing analysis: Tools and applications for determining hydrogen production cost for fuel cell vehicle technology. Energies, 13(15), 3783. https://doi.org/10.3390/en13153783
48. Deng, Y., Liu, H., Lai, L., She, F., Liu, F., Li, M., & et al. (2025). Platinum-ruthenium bimetallic nanoparticle catalysts synthesized via direct joule heating for methanol fuel cells. Nano-Micro Small, 21(7), 2403967. https://doi.org/10.1002/smll.202403967
49. Khatib, F. N., Wilberforce, T., Ijaodola, O., Ogungbemi, E., El-Hassan, Z., Durrant, A., & et al. (2019). Material degradation of components in polymer electrolyte membrane (PEM) electrolytic cell and mitigation mechanisms: A review. Renewable and Sustainable Energy Reviews, 111, 1-14. https://doi.org/10.1016/j.rser.2019.05.007
50. Ellamla, H. R., Staffell, I., Bujlo, P., Pollet, B. G., & Pasupathi, S. (2015). Current status of fuel cell based combined heat and power systems for residential sector. Journal of Power Sources, 293, 312-328. https://doi.org/10.1016/j.jpowsour.2015.05.050
51. Giorgi, L., & Leccese, F. (2013). Fuel cell: Technologies and applications. The Open Fuel Cells Journal, 6(1), 1-20. https://doi.org/10.2174/1875932720130719001
52. Ermiş, K. (2023). Fuel cell and applications. Kaygusuz, K. (Ed.), Interdisciplinary Studies on Contemporary Research Practices in Engineering in the 21st Century-IV, 125-148. Özgür Yayınları, Gaziantep. https://doi.org/10.58830/ozgur.pub250.c1205
53. Mancino, A. N., Menale, C., Vellucci, F., Pasquali, M., & Bubbico, R. (2023). PEM fuel cell applications in road transport. Energies, 16(17), 6129. https://doi.org/10.3390/en16176129
54. Ding, D., & Wu, X. Y. (2024). Hydrogen fuel cell electric trains: Technologies, current status, and future. Applications in Energy and Combustion Science, 17, 100255. https://doi.org/10.1016/j.jaecs.2024.100255
55. Sesu, D. C., Narendran, G., Ramakrishnan, S., Vediappan, K., Muthu, S. E., Shanmugan, S. & et al. (2025). Design and fabrication of micro-rlectromechanical system (MEMS)-based μ-DMFC (direct methanol fuel cells) for portable applications: An outlook. Electrochem, 6(2), 11. https://doi.org/10.3390/electrochem6020011
56. Guo, Z., & Faghri, A. (2007). Vapor feed direct methanol fuel cells with passive thermal-fluids management system. Journal of Power Sources, 167(2), 378-390. https://doi.org/10.1016/j.jpowsour.2007.02.024
57. Kazula, S., de Graaf, S., & Enghardt, L. (2023). Review of fuel cell technologies and evaluation of their potential and challenges for electrified propulsion systems in commercial aviation. Journal of the Global Power and Propulsion Society, 7, 43-57. https://doi.org/10.33737/jgpps/158036
58. Cigolotti, V., Genovese, M., & Fragiacomo, P. (2021). Comprehensive review on fuel cell technology for stationary applications as sustainable and efficient poly-generation energy systems. Energies, 14(16), 4963. https://doi.org/10.3390/en14164963
59. Perry, M. L., & Fuller, T. F. (2002). A historical perspective of fuel cell technology in the 20th century. Journal of The Electrochemical Society, 149(7), 59-67. https://doi.org/10.1149/1.1488651
60. Ong, B. C., Kamarudin, S. C., & Basri, S. (2017). Direct liquid fuel cells: A review. International Journal of Hydrogen Energy, 42(15), 10142-10157. https://doi.org/10.1016/j.ijhydene.2017.01.117
61. Verhaert, I., Mulder, G., & De Paepe, M. (2016). Evaluation of an alkaline fuel cell system as a micro-CHP. Energy Conversion and Management, 126, 434-445. https://doi.org/10.1016/j.enconman.2016.07.058
62. Kumar, A., Singh, T., Singh, S., & Liu, Y. (2013). A comprehensive review of fuel cell and its types. International Journal of Research in Mechanical Engineering & Technology, 3(1), 13-21. https://doi.org/10.1155/2024/7271748
63. Zeng, R., & Varcoe, J. R. (2011). Alkaline anion exchange membranes for fuel cells- A patent review. Recent Patents on Chemical Engineering, 4(2), 93-115. https://doi.org/10.2174/2211334711104020093
64. Khade, A. R. (2014). Fuel cell technologies and applications. International Journal of Science and Research, 3(6), 978-982. https://dx.doi.org/10.21275/2014367
65. Jawad, N. H., Yahya, A. A., Al-Shatr, A. R., Salih, H. G., Rashid, K. T., Al-Saadi, S., & et al. (2022). Fuel cell types, properties of membrane, and operating conditions: A review. Sustainability, 14(21), 14653. https://doi.org/10.3390/su142114653
66. Al-Zaidi, M., Al-Khafaji, R. Q., Al-Zubaidy, D. K., & Salman, M. M. (2021). A review: Fuel cells types and their applications. International Journal of Scientific Engineering and Applied Science, 7(7), 375-190.
67. Grew, K. N., Ren, X., & Chu, D. (2011). Effect of CO2 on the alkaline membrane fuel cell. ECS Transactions, 41(1), 1979. https://doi.org/10.1149/1.3635727
68. Hamada, A. T., Orhan, M. F., & Kannan, A. M. (2023). Alkaline fuel cells: Status and prospects. Energy Reports, 9, 6396-6418. https://doi.org/10.1016/j.egyr.2023.05.276
69. Ramasamy, P., Muruganantham, B., Rajasekaran, S., Babu, B. D., Ramkumar, R., Marthanda, A. V. A., & et al. (2024). A comprehensive review on different types of fuel cell and its applications. Bulletin of Electrical Engineering and Informatics, 13(2), 774-780. https://doi.org/10.11591/eei.v13i2.6348
70. Sammes, N., Bove, R., & Stahl, K. (2004). Phosphoric acid fuel cells: Fundamentals and applications. Current Opinion in Solid State and Materials Science, 8(5), 372-378. https://doi.org/10.1016/j.cossms.2005.01.001
71. Kumuk, B. (2019). A review of fuel cell types and applications. Turkish Journal of Energy Policy, 4(9), 1-9.
72. Mekhilef, S., Saidur, R., & Safar, A. (2012). Comparative study of different fuel cell technologies. Renewable and Sustainable Energy Reviews, 16(1), 981-989. https://doi.org/10.1016/j.rser.2011.09.020
73. Zervas, P. L., Tatsis, A., Sarimveis, H., & Markatos, N. C. G. (2008). Development of a novel computational tool for optimizing the operation of fuel cells systems: Application for phosphoric acid fuel cells. Journal of Power Sources, 185(1), 345-355. https://doi.org/10.1016/j.jpowsour.2008.06.081
74. Du, Y., & Zhan, H. (2021). Analysis of related technologies used in fuel cell vehicles. Journal of Physics: Conference Series, 2125, 012011. https://doi.org/10.1088/1742-6596/2125/1/012011
75. Singhal, S. C. (2000). Advances in solid oxide fuel cell technology. Solid State Ionics, 135(1-4), 305-313. https://doi.org/10.1016/S0167-2738(00)00452-5
76. Dhingra, H., & Peppley, B. A. (2013). Sensitivity analysis of a 1 kw diesel-fuelled SOFC generator: A single and paired-variable study. Journal of Power Sources, 239, 527-537. https://doi.org/10.1016/j.jpowsour.2013.03.107
77. Corigliano, O., Pagnotta, L., & Fragiacomo, P. (2022). On the technology of solid oxide fuel cell (SOFC) energy systems for stationary power generation: A review. Sustainability, 14(22), 15276. https://doi.org/10.3390/su142215276
78. Zhang, X., Chan, S. H., Li, G., Ho, H. K., Li, J., & Feng, Z. (2010). A review of integration strategies for solid oxide fuel cells. Journal of Power Sources, 195(3), 685-702. https://doi.org/10.1016/j.jpowsour.2009.07.045
79. Stambouli, A. B., & Traversa, E. (2002). Solid oxide fuel cells (SOFCs): A review of an environmentally clean and efficient source of energy. Renewable and Sustainable Energy Reviews, 6(5), 433-455. https://doi.org/10.1016/S1364-0321(02)00014-X
80. Dwivedi, S. (2020). Solid oxide fuel cell: Materials for anode, cathode and electrolyte. International Journal of Hydrogen Energy, 45(44), 23988-24013. https://doi.org/10.1016/j.ijhydene.2019.11.234
81. Sharaf, O. Z., & Orhan, M. F. (2014). An overview of fuel cell technology: Fundamentals and applications. Renewable and Sustainable Energy Reviews, 32, 810-853. https://doi.org/10.1016/j.rser.2014.01.012
82. Halinen, M., & Pennanen, J. (2015). Analysis of leakages in a solid oxide fuel cell stack in a system environment. Fuel Cells, 15(2), 434-444. https://doi.org/10.1002/fuce.201400072
83. Li, N., Poozhikunnath, A., Aindow, M., & Maric, R. (2015). Optimization of support materials for intermediate temperature molten carbonate fuel cells (IT-MCFC). ECS Meeting Abstracts, MA2015-01, 191. https://doi.org/10.1149/MA2015-01/1/191
84. Sauzet, H., Collet, R., Héau, C., Pupier, C., Rodrigues, D., Cannes, C., & et al. (2022). Redox properties of the carbonate molten salt Li2CO3-Na2CO3-K2CO3. Electrochimica Acta, 405, 139765. https://doi.org/10.1016/j.electacta.2021.139765
85. Brouwer, J., Jabbari, F., Leal, E. M., & Orr, T. (2006). Analysis of a molten carbonate fuel cell: Numerical modeling and experimental validation. Journal of Power Sources, 158(1), 213-224. https://doi.org/10.1016/j.jpowsour.2005.07.093
86. Huang, H., Li, J., He, Z., Zeng, T., Kobayashi, N., & Kubota, M. (2015). Performance analysis of a MCFC/MGT hybrid power system bi-fueled by city gas and biogas. Energies, 8(6), 5661-5667. https://doi.org/10.3390/en8065661
87. Mamaghani, A. H., Najafi, B., Shirazi, A., & Rinaldi, F. (2015). 4E analysis and multi-objective optimization of an ıntegrated MCFC (molten carbonate fuel cell) and ORC (organic rankine cycle) system. Energy, 82, 650-663. https://doi.org/10.1016/j.energy.2015.01.074
88. Mirahmadi, A., & Akbari, H. (2012). A noble method for molten carbonate fuel cells electrolyte manufacturing. Journal of Solid State Electrochemistry, 16, 931-936. https://doi.org/10.1007/s10008-011-1461-1
89. Giulio, N. D., Bosio, B., Cigolotti, V., & Nam, S. W. (2012). Experimental and theoretical analysis of H2S effects on MCFCs. International Journal of Hydrogen Energy, 37(24), 19329-19336. https://doi.org/10.1016/j.ijhydene.2012.03.086
90. Xing, H., Stuart, C., Spence, S., & Chen, H. (2021). Fuel cell power systems for maritime applications: Progress and perspectives. Sustainability, 13(3), 1213. https://doi.org/10.3390/su13031213
91. Wilberforce, T., Olabi, A. G., Muhammad, I., Alaswad, A., Sayed, E. T., Abo-Khalil, A. G., & et al. (2024). Recovery of waste heat from proton exchange membrane fuel cells-A review. International Journal of Hydrogen Energy, 52(Part C), 933-972. https://doi.org/10.1016/j.ijhydene.2022.08.069
92. Rosli, R. E., Sulong, A. B., Daud, W. R. W., Zulkifley, M. A., Husaini, T., Rosli, M. I., & et al. (2017). A review of high-temperature proton exchange membrane fuel cell (HT-PEMFC) system. International Journal of Hydrogen Energy, 42, 9293-9314. https://doi.org/10.1016/j.ijhydene.2016.06.211
93. Das, S. K., Reis, A., & Berry, K. J. (2009). Experimental evaluation of CO poisoning on the performance of a high temperature proton exchange membrane fuel cell. Journal of Power Sources, 193(2), 691-698. https://doi.org/10.1016/j.jpowsour.2009.04.021
94. Ali, A. B. M., Nemah, A. K., Al Bahadli, Y. A., & Kianfar, E. (2024). Principles and performance and types, advantages and disadvantages of fuel cells: A review. Case Studies in Chemical and Environmental Engineering, 10, 100920. https://doi.org/10.1016/j.cscee.2024.100920
95. Abedin, T., Pasupuleti, J., Paw, J. K. S., Tak, Y. C., Mahmud, M., Abdullah, M. P., & et al. (2025). Proton exchange membrane fuel cells in electric vehicles: Innovations, challenges, and pathways to sustainability. Journal of Power Sources, 640, 236769. https://doi.org/10.1016/j.jpowsour.2025.236769
96. Bilen, K., Tarhan, B. C., & Çelik, S. (2023). Numerical investigation of the effect of operating conditions on the performance parameters of PEM fuel cells. International Journal of Energy Studies, 8(3), 491-512. https://doi.org/10.58559/ijes.1264797
97. Madheswaran, D. K., & Jayakumar, A. (2021). Recent advancements on non-platinum based catalyst electrode material for polymer electrolyte membrane fuel cells: A mini techno-economic review. Bulletin of Materials Science, 44, 287. https://doi.org/10.1007/s12034-021-02572-6
98. Kazim, A. (2005). Exergoeconomic analysis of a PEM fuel cell at various operating conditions. Energy Conversion and Management, 46(7-8), 1073-1081. https://doi.org/10.1016/j.enconman.2004.06.036
99. Pei, P., Xu, Y., Wang, M., & Ren, P. (2024). Effects of carbon monoxide on proton exchange membrane fuel cells and elimination techniques. International Journal of Hydrogen Energy, 69, 1287-1304. https://doi.org/10.1016/j.ijhydene.2024.05.155
100. Harun, N. A. M., Shaari, N., & Zaiman, N. F. H. N. (2021). A review of alternative polymer electrolyte membrane for fuel cell application based on sulfonated poly(ether ether ketone). International Journal of Energy Research, 45(14), 19671-19708. https://doi.org/10.1002/er.7048
101. Hogarth, M. P., & Ralph, T. R. (2002). Catalysis for low temperature fuel cells, Part III: Challenges for the direct methanol fuel cell. Platinum Metals Review, 46(4), 146-164. https://doi.org/10.1595/003214002X464146164
102. Hosseinpour, M., Sahoo, M., Perez-Page, M., Baylis, S. R., Patel, F., & Holmez, S. M. (2019). Improving the performance of direct methanol fuel cells by implementing multilayer membranes blended with cellulose nanocrystals. International Journal of Hydrogen Energy, 44(57), 30409-30419. https://doi.org/10.1016/j.ijhydene.2019.09.194
103. Tamer, M., Akyalçın, S., & Akyalçın, L. (2024). Recent progresses and challenges to determine properties of sulfonated polyether ether ketone based electrolytes for direct methanol fuel cell applications. ChemElectroChem, 11(23), e202400345. https://doi.org/10.1002/celc.202400345
104. Spragg, R., & Li, X. (2024). Vapor-feed direct methanol fuel cells using pure methanol. Energy Conversion and Management: X, 24, 100746. https://doi.org/10.1016/j.ecmx.2024.100746
105. Xia, Z., Zhang, X., Sun, H., Wang, S., & Sun, G. (2019). Recent advances in multi-scale design and construction of materials for direct methanol fuel cells. Nano Energy, 65, 104048. https://doi.org/10.1016/j.nanoen.2019.104048
106. Ahmed, A. A., Labadidi, M. A., Hamada, A. T., & Orhan, M. F. (2022). Design and utilization of a direct methanol fuel cell. Membranes, 12(12), 1266. https://doi.org/10.3390/membranes12121266
107. Zhao, L., & Jiang, Y. (2025). Sustainable anodes for direct methanol fuel cells: Advancing beyond platinum scarcity with low-pt alloys and non-pt systems. Sustainability, 17(11), 5086. https://doi.org/10.3390/su17115086
108. Seo, S. H., & Lee, C. S. (2010). A study on the overall efficiency of direct methanol fuel cell by methanol crossover current. Applied Energy, 87(8), 2597-2604. https://doi.org/10.1016/j.apenergy.2010.01.018
109. Xia, Z., Sun, R., Jing, F., Wang, S., Sun, H., & Sun, G. (2018). Modeling and optimization of scaffold-like macroporous electrodes for highly efficient direct methanol fuel cells. Applied Energy, 221, 239-248. https://doi.org/10.1016/j.apenergy.2018.03.100
110. Eriş Dalğıç, A. (2022). PEM yakıt hücrelerinde kullanılmak üzere PES blend membran üretimi ve karakterizasyonu. Master’s thesis, Gazi University, Graduate School of Natural and Applied Sciences, Ankara, Türkiye.
111. Devrim, Y. (2006). Alternatif yöntemler kullanılarak proton değişim membran yakıt hücreleri için yeni membranların geliştirilmesi. Doctoral thesis, Hacettepe University, Graduate School of Natural and Applied Sciences, Ankara, Türkiye.
112. Çalı, A. (2023). Proton değişim membranlı yakıt pilleri için membran sentezi ve karakterizasyonu. Doctoral thesis, Gazi University, Graduate School of Natural and Applied Sciences, Ankara, Türkiye.
113. Liu, L., Liu, T., Ding, F., Zhang, H., Zheng, H., & Li, Y. (2021). Exploration of the polarization curve for proton-exchange membrane fuel cells. ACS Applied Materials & Interfaces, 13(49), 58838-58847. https://doi.org/10.1021/acsami.1c20289
114. Bagherabadi, K. M., Skjong, S., & Pedersen, E. (2022). Dynamic modelling of PEM fuel cell system for simulation and sizing of marine power systems. International Journal of Hydrogen Energy, 47(40), 17699-17712. https://doi.org/10.1016/j.ijhydene.2022.03.247
115. Strametz, F., Wallnöfer-Ogris, E., Schutting, E., & Trattner, A. (2025). From theory to operation: A systematic loss analysis framework for fuel cell systems. Journal of Power Sources, 654, 237804. https://doi.org/10.1016/j.jpowsour.2025.237804
116. Yan, Q., Toghiani, H., & Causey, H. (2006). Steady state and dynamic performance of proton exchange membrane fuel cells (PEMFCs) under various operating conditions and load changes. Journal of Power Sources, 161(1), 492-502. https://doi.org/10.1016/j.jpowsour.2006.03.077
117. Badduri, S. R., Srinivasulu, C. N., & Rao, S. S. (2019). Experimental analysis of PEM fuel cell performance using lung channel design bipolar plate. International Journal of Green Energy, 16(15), 1591-1601. https://doi.org/10.1080/15435075.2019.1677238
118. Hao, D., Shen, J., Hou, Y., Zhou, Y., & Wang, H. (2016). An improved empirical fuel cell polarization curve model based on review analysis. International Journal of Chemical Engineering, 2016(1), 4109204. https://doi.org/10.1155/2016/4109204
119. Şahin, A. (2013). Yakıt hücrelerinde kullanmak üzere nanokompozit membran sentezi ve karakterizasyonu. Doctoral thesis, Gazi University, Graduate School of Natural and Applied Sciences, Ankara, Türkiye.
120. Radha, M. A. (2018). Synthesis and characterization of hydrocarbon based nanocomposite membrane for PEM fuel cells. Doctoral thesis, Selçuk University, Graduate School of Natural and Applied Sciences, Konya, Türkiye.
121. Bernhard, D., Kadyk, T., Kirsch, S., Scholz, H., & Krewer, U. (2023). Model-assisted analysis and prediction of activity degradation in PEM-fuel cell cathodes. Journal of Power Sources, 562, 232771. https://doi.org/10.1016/j.jpowsour.2023.232771
122. Salva, J. A., Iranzo, A., Rosa, F., Tapia, E., Lopez, E., & Isorna, F. (2016). Optimization of a PEM fuel cell operating conditions: obtaining the maximum performance polarization curve. International Journal of Hydrogen Energy, 41(43), 19713-19723. https://doi.org/10.1016/j.ijhydene.2016.03.136
123. Akay, R. G. (2008). Development and characterization of composite proton exchange membranes for fuel cell applications. Doctoral thesis, Middle East Technical University, Graduate School of Natural and Applied Sciences, Ankara, Türkiye.
124. Tang, Y., Zhang, J., Song, C., Liu, H., Zhang, J., Wang, H., & et al. (2006). Temperature dependent performance and in situ AC impedance of high-temperature PEM fuel cells using the Nafion-112 membrane. Journal of The Electrochemical Society, 153(11), A2036. https://doi.org/10.1149/1.2337008
125. Williams, V. M., Kunz, H. R., & Fenton, J. M. (2005). Analysis of polarization curves to evaluate polarization sources in hydrogen/air PEM fuel cells. Journal of The Electrochemical Society, 152(3), A635. https://doi.org/10.1149/1.1860034
126. Bezmalinovic, D., Simic, B., & Barbir, F. (2015). Characterization of PEM fuel cell degradation by polarization change curves. Journal of Power Sources, 294, 82-87. https://doi.org/10.1016/j.jpowsour.2015.06.047
127. Thosar, A. U., Agarwal, H., Govarthan, S., & Lele, A. K. (2019). Comprehensive analytical model for polarization curve of a PEM fuel cell and experimental validation. Chemical Engineering Science, 206, 96-117. https://doi.org/10.1016/j.ces.2019.05.022
128. Cheng, X., Shi, Z., Glass, N., Zhang, L., Zhang, J., Song, D., & et al. (2007). A review of PEM hydrogen fuel cell contamination: Impacts, mechanisms, and mitigation. Journal of Power Sources, 165(2), 739-756. https://doi.org/10.1016/j.jpowsour.2006.12.012
129. Kahraman, H., & Akın, Y. (2024). Recent studies on proton exchange membrane fuel cell components, review of the literature. Energy Conversion and Management, 304, 118244. https://doi.org/10.1016/j.enconman.2024.118244
130. Mariani, M., Peressut, A. B., Latorrata, S., Balzarotti, R., Sansotera, M., & Dotelli, G. (2021). The role of fluorinated polymers in the water management of proton exchange membrane fuel cells: A review. Energies, 14(24), 8387. https://doi.org/10.3390/en14248387
131. Kuan, Y. D., Lyu, J. L., Ke, T. R., Sung, M. F., & Do, J. S. (2019). Planar current collector design and fabrication for proton exchange membrane fuel cell. International Journal of Hydrogen Energy, 44(20), 10071-10081. https://doi.org/10.1016/j.ijhydene.2018.12.178
132. Asghari, S., Shahsamandi, M. H., & Ashraf Khorasani, M. R. (2010). Design and manufacturing of end plates of a 5 kW PEM fuel cell. International Journal of Hydrogen Energy, 35(17), 9291-9297. https://doi.org/10.1016/j.ijhydene.2010.02.135
133. Zhao, J., Guo, H., Xing, Y., Ping, S., Lin, W., Yang, Y., & et al. (2023). A review on the sealing structure and materials of fuel-cell stacks. Clean Energy, 7(1), 59-69. https://doi.org/10.3390/wevj15080358
134. Zhang, Y., Wang, J., & Yao, Z. (2023). Recent development of fuel cell core components and key materials: A review. Energies, 16(5), 2099. https://doi.org/10.3390/en16052099
135. Li, X., & Sabir, I. (2005). Review of bipolar plates in PEM fuel cells: Flow-field designs. International Journal of Hydrogen Energy, 30(4), 359-371. https://doi.org/10.1016/j.ijhydene.2004.09.019
136. Antunes, R. A., Oliveria, M. C. L., Ett, G., & Ett, V. (2010). Corrosion of metal bipolar plates for PEM fuel cells: A review. International Journal of Hydrogen Energy, 35(8), 3632-3647. https://doi.org/10.1016/j.ijhydene.2010.01.059
137. Ji, S., Hwang, Y. S., Park, T., Lee, Y. H., Paek, L. Y., Chang, I., & et al. (2012). Graphite foil based assembled bipolar plates for polymer electrolyte fuel cells. International Journal of Precision Engineering and Manufacturing, 13, 2183-2186. https://doi.org/10.1007/s12541-012-0289-7
138. Wang, Y., Diaz, D. F. R., Chen, K. S., Wang, Z., & Adroher, X. C. (2000). Materials, technological status, and fundamentals of PEM fuel cells - A review. Materials Today, 32, 178-203. https://doi.org/10.1016/j.mattod.2019.06.005
139. Irshad, H. M., & Shahgaldi, S. (2025). Comprehensive review of bipolar plates for proton exchange membrane fuel cells with a focus on materials, processing methods and characteristics. International Journal of Hydrogen Energy, 111, 462-487. https://doi.org/10.1016/j.ijhydene.2025.02.300
140. Wang, Y., Seo, B., Wang, B., Zamel, N., Jiao, K., & Adroher, X. C. (2020). Fundamentals, materials, and machine learning of polymer electrolyte membrane fuel cell technology. Energy and AI, 1, 100014. https://doi.org/10.1016/j.egyai.2020.100014
141. Omrani, R., & Shabani, B. (2017). Gas diffusion layer modifications and treatments for ımproving the performance of proton exchange membrane fuel cells and electrolysers: A review. International Journal of Hydrogen Energy, 42(47), 28515-28536. https://doi.org/10.1016/j.ijhydene.2017.09.132
142. Chen, Y., Liu, Y., Xu, Y., Gup, X., Cao, Y., & Ming, W. (2022). Review: Modeling and simulation of membrane electrode material structure for proton exchange membrane fuel cells. Coatings, 12(8), 1145. https://doi.org/10.3390/coatings12081145
143. Qi, Z., & Kaufman, A. (2002). Improvement of water management by a microporous sublayer for PEM fuel cells. Journal of Power Sources, 109(1), 38-46. https://doi.org/10.1016/S0378-7753(02)00058-7
144. Shi, Q., Feng, C., Ming, P., Tang, F., & Zhang, C. (2022). Compressive stress and its ımpact on the gas diffusion layer: A review. International Journal of Hydrogen Energy, 47(6), 3994-4009. https://doi.org/10.1016/j.ijhydene.2021.10.058
145. Csoklich, C., Sabharwal, M., Schmidt, T. J., & Büchi, F. N. (2022). Does the thermal conductivity of gas diffusion layer matter in polymer electrolyte fuel cells?. Journal of Power Sources, 540, 231539. https://doi.org/10.1016/j.jpowsour.2022.231539
146. Dao, D. V., Adilbish, G., Le, T. D., Lee, I. H., & Yu, Y. T. (2019). Triple phase boundary and power density enhancement in PEMFCs of a Pt/C electrode with double catalyst layers. RSC Advances, 9(27), 15635-15641. https://doi.org/10.1039/C9RA01741K
147. Okonkwo, P. C. (2025). Proton exchange membrane fuel cell catalyst layer degradation mechanisms: A succinct review. Catalysts, 15(1), 97. https://doi.org/10.3390/catal15010097
148. Min, T., Zhang, R., Chen, L., & Zhou, Q. (2023). Reactive transport processes in proton exchange membrane fuel cells. Encyclopedia, 3(2), 746-758. https://doi.org/10.3390/encyclopedia3020054
149. Cullen, D. A., Neyerlin, K. C., Ahluwalia, R. K., Mukundan, R., More, K. L., Borup, R. L., & et al. (2021). New roads and challenges for fuel cells in heavy-duty transportation. Nature Energy, 6, 462-474. https://doi.org/10.1038/s41560-021-00775-z
150. Manso, A. P., Marzo, F. F., Barranco, J., Garikano, X., & Mujika, M. G. (2012). Influence of geometric parameters of the flow fields on the performance of a PEM fuel cell. A review. International Journal of Hydrogen Energy, 37(20), 15256-15287. https://doi.org/10.1016/j.ijhydene.2012.07.076
151. Araya, S. S., Zhou, F., Liso, V., Sahlin, S. L., Vang, J. R., Thomas, S., & et al. (2016). A comprehensive review of PBI-based high temperature PEM fuel cell. International Journal of Hydrogen Energy, 41(46), 21310-21344. https://doi.org/10.1016/j.ijhydene.2016.09.024
152. Deng, X., Ma, L., Wang, C., Ye, H., Cao, L., Zhan, X., & et al. (2025). Recent progress in materials design and fabrication techniques for membrane electrode assembly in proton exchange membrane fuel cells. Catalysts, 15(1), 74. https://doi.org/10.3390/catal15010074
153. Mo, S., Du, L., Huang, Z., Chen, J., Zhou, Y., Wu, P., & et al. (2023). Recent advances on PEM fuel cells: From key materials to membrane electrode assembly. Electrochemical Energy Reviews, 6, 28. https://doi.org/10.1007/s41918-023-00190-w
154. Kang, B. G., Kwon, Y. R., Hong, K. W., Kwon, S. K., Lee, H. M., Song, D. K., & et al. (2025). Performance improvement of proton exchange membrane fuel cells with a TiO2 sputtered gas diffusion layer under low-humidity conditions. Energies, 18(6), 1525. https://doi.org/10.3390/en18061525
155. Arslan, T. A., Bayrakçeken, H., Solmaz, H., Taşkın, G., Tabanlıgil Calam, T., Calam, A., & et al. (2025). Development and characterization of sulfonated poly(sulfone)/poly(styrene-co-acrylonitrile) composite blend membranes for enhanced proton conductivity. Process Safety and Environmental Protection, 201(Part B), 107607. https://doi.org/10.1016/j.psep.2025.107607
156. Zhang, J., Litteer, B. A., Gu, W., Liu, H., & Gasteiger, H. A. (2007). Effect of hydrogen and oxygen partial pressure on Pt precipitation within the membrane of PEMFCs. Journal of The Electrochemical Society, 154, B1006. https://doi.org/10.1149/1.2764240
157. Smitha, B., Sridhar, S., & Khan, A. A. (2005). Proton conducting composite membranes from polysulfone and heteropolyacid for fuel cell applications. Journal of Polymer Science Part B: Polymer Physics, 43(12), 1538-1547. https://doi.org/10.1002/polb.20450
158. Motupally, S., Becker, A., & Weidner, J. W. (2000). Diffusion of water in Nafion 115 membranes. Journal of The Electrochemical Society, 147(9), 3171. https://doi.org/10.1149/1.1393879
159. Kraytsberg, A., & Ein-Eli, Y. (2014). Review of advanced materials for proton exchange membrane fuel cells. Energy & Fuels, 28(12), 7303-7330. https://doi.org/10.1021/ef501977k
160. Teixeira, F. C., Sá, A. I., Teixeira, A. P. S., Ortiz-Martínez, V. M., Ortiz, A., Ortiz, I., & et al. (2021). New modified Nafion-bisphosphonic acid composite membranes for enhanced proton conductivity and pemfc performance. International Journal of Hydrogen Energy, 46(33), 17562-17571. https://doi.org/10.1016/j.ijhydene.2020.01.212
161. Esmaeilli, N., Gray, E. M., & Webb, C. J. (2019). Non-fluorinated polymer composite proton exchange membranes for fuel cell applications - A review. ChemPhysChem, 20, 2016-2053. https://doi.org/10.1002/cphc.201900191
162. Sinirlioğlu, D., Ünügür Çelik, S., Müftüoğlu, A. E., & Bozkurt, A. (2015). Novel composite polymer electrolyte membranes based on poly(vinyl phosphonic acid) and poly (5-(methacrylamido)tetrazole). Polymer Engineering and Science, 55(2), 260-269. https://doi.org/10.1002/pen.23890
163. Awang, N., Ismail, A. F., Jaafar, J., Matsuura, T., Junoh, H., Othman, M. H. D., & et al. (2015). Functionalization of polymeric materials as a high performance membrane for direct methanol fuel cell: A review. Reactive and Functional Polymers, 86, 248-258. https://doi.org/10.1016/j.reactfunctpolym.2014.09.019
164. Peighambardoust, S. J., Rowshanzamir, S., & Amjadi, M. (2010). Review of the proton exchange membranes for fuel cell applications. International Journal of Hydrogen Energy, 35, 9349-9384. https://doi.org/10.1016/j.ijhydene.2010.05.017
165. Segale, M., Seadira, T., Sigwadi, R., Mokrani, T., & Summers, G. (2024). A new frontier towards the development of efficient SPEEK polymer membranes for PEM fuel cell applications: A review. Materials Advances, 5, 7979-8006. https://doi.org/10.1039/D4MA00628C
166. Balogun, E., & Holdcroft, S. (2023). Impact of conditioning protocol on hydrocarbon-based solid polymer electrolyte fuel cells. Journal of Power Sources, 570, 233008. https://doi.org/10.1016/j.jpowsour.2023.233008
167. Pivovar, B., Wang, Y., & Cussler, E. L. (1999). Pervaporation membranes in direct methanol fuel cells. Journal of Membrane Science, 154(2), 155-162. https://doi.org/10.1016/S0376-7388(98)00264-6
168. Hong, S. J., Jung, H. Y., Yoon, S. J., Oh, K. H., Oh, S. G., Hong, Y. T., & et al. (2022). Constrained hydrocarbon-based ionomers in porous poly(tetrafluoroethylene) supports for enhanced durability of polymer electrolyte membrane fuel cells and water electrolyzers. Journal of Power Sources, 551, 232221. https://doi.org/10.1016/j.jpowsour.2022.232221
169. Giffin, G. A., Galbiati, S., Walter, M., Aniol, K., Ellwein, C., Kerres, J., & et al. (2017). Interplay between structure and properties in acid-base blend PBI-Based membranes for HT-PEM fuel cells. Journal of Membrane Science, 535, 122-131. https://doi.org/10.1016/j.memsci.2017.04.019
170. Yang, X., Huang, L., Deng, Q., & Dong, W. (2024). A sustainable and eco-friendly membrane for PEM fuel cells using bacterial cellulose. Polymers, 16(21), 3017. https://doi.org/10.3390/polym16213017
171. Beuscher, U., Cleghorn, S. J. C., & Johnson, W. B. (2005). Challenges for PEM fuel cell membranes. International Journal of Energy Research, 29, 1103-1112. https://doi.org/10.1002/er.1142
172. Seng, L. K., Masdar, M. S., & Shyuan, L. K. (2021). Ionic liquid in phosphoric acid-doped polybenzimidazole (PA-PBI) as electrolyte membranes for PEM fuel cells: A review. Membranes, 11(10), 728. https://doi.org/10.3390/membranes11100728
173. Shaari, N., & Kamarudin, S. K. (2019). Recent advances in additive‐enhanced polymer electrolyte membrane properties in fuel cell applications: An overview. International Journal of Energy Research, 43, 2756-2794. https://doi.org/10.1002/er.4348
174. Jiao, K., & Li, X. (2011). Water transport in polymer electrolyte membrane fuel cells. Progress in Energy and Combustion Science, 37, 221-291. https://doi.org/10.1016/j.pecs.2010.06.002
175. Hickner, M. A., Ghassemi, H., Kim, Y. S., Einsla, B. R., & McGrath, J. E. (2004). Alternative polymer systems for proton exchange membranes (PEMs). Chemical Reviews, 104(10), 4587-4612. https://doi.org/10.1021/cr020711a
176. Antolini, E., & Gonzalez, E. R. (2010). Alkaline direct alcohol fuel cells. Journal of Power Sources, 195(11), 3431-3450. https://doi.org/10.1016/j.jpowsour.2009.11.145
177. Branco, C. M., Sharma, S., de Camargo Forte, M. M., & Steinberger-Wilckens, R. (2016). New approaches towards novel composite and multilayer membranes for ıntermediate temperature-polymer electrolyte fuel cells and direct methanol fuel cells. Journal of Power Sources, 316, 139-159. https://doi.org/10.1016/j.jpowsour.2016.03.052
178. Varcoe, J. R., & Slade, R. C. T. (2005). Prospects for alkaline anion-exchange membranes in low temperature fuel cells. Fuel Cells, 5, 187-200. https://doi.org/10.1002/fuce.200400045
179. Olbrich, W., Kadyk, T., Sauter, U., Eikerling, M., & Gostick, J. (2023). Structure and conductivity of ionomer in PEM fuel cell catalyst layers: A model-based analysis. Scientific Reports, 13, 14127. https://doi.org/10.1038/s41598-023-40637-0
180. Bhosale, A. C., Ghosh, P. C., & Assaud, L. (2020). Preparation methods of membrane electrode assemblies for proton exchange membrane fuel cells and unitized regenerative fuel cells: A review. Renewable and Sustainable Energy Reviews, 133, 110286. https://doi.org/10.1016/j.rser.2020.110286
181. Wang, G., Kang, J., Yang, S., Lu, M., & Wei, H. (2024). Influence of structure construction on water uptake, swelling, and oxidation stability of proton exchange membranes. International Journal of Hydrogen Energy, 50(Part C), 279-311. https://doi.org/10.1016/j.ijhydene.2023.08.129
182. Paciocco, J., Cawte, T., & Bazylak, A. (2023). Predicting optimal membrane hydration and ohmic losses in operating fuel cells with machine learning. Journal of Power Sources, 573, 23319. https://doi.org/10.1016/j.jpowsour.2023.233119
183. Taufiq Musa, M., Shaari, N., & Kamarudin, S. K. (2021). Carbon nanotube, graphene oxide and montmorillonite as conductive fillers in polymer electrolyte membrane for fuel cell: An overview. International Journal of Energy Research, 45, 1309-1346. https://doi.org/10.1002/er.5874
184. Abbou, S., Tajiri, K., Medici, E., Haug, A. T., & Allen, J. S. (2018). Liquid water uptake and contact angle measurement of proton exchange membrane fuel cell (PEMFC) electrodes. ECS Transactions, 86(13), 163. https://doi.org/10.1149/08613.0163ecst
185. Pan, H., Chen, S., Zhang, Y., Jin, M., Chang, Z., & Pu, H. (2015). Preparation and properties of the cross-linked sulfonated polyimide containing benzimidazole as electrolyte membranes in fuel cells. Journal of Membrane Science, 476, 87-94. https://doi.org/10.1016/j.memsci.2014.11.023
186. Vishal Gupta, N., & Shivakumar, H. G. (2011). Investigation of swelling behavior and mechanical properties of a pH-sensitive superporous hydrogel composite. Iranian Journal of Pharmaceutical Research, 11(2), 481-493.
187. Adamski, M., Peressin, N., & Holfcroft, S. (2021). On the evolution of sulfonated polyphenylenes as proton exchange membranes for fuel cells. Materials Advances, 2, 4966-5005. https://doi.org/10.1039/D1MA00511A
188. Singh, Y., White, R. T., Najm, M., Haddow, T., Pan, V., Orfino, F. P., & et al. (2019). Tracking the evolution of mechanical degradation in fuel cell membranes using 4D in situ visualization. Journal of Power Sources, 412, 224-237. https://doi.org/10.1016/j.jpowsour.2018.11.049
189. Barclay Satterfield, M., Majsztrik, P. W., Ota, H., Benziger, J. B., & Bocarsly, A. B. (2006). Mechanical properties of Nafion and titania/Nafion composite membranes for polymer electrolyte membrane fuel cells. Journal of Polymer Science, Part B: Polymer Physics, 44(16), 2327-2345. https://doi.org/10.1002/polb.20857
190. Othman, M. H., Ismail, A. F., & Mustafa, A. I. (2010). Recent development of polymer electrolyte membranes for direct methanol fuel cell application - A review. Malaysian Polymer Journal, 5(2), 1-36.
191. Ahmad, S., Nawaz, T., Ali, A., Orhan, M. F., Samreen, A., & Kannan, A. M. (2022). An overview of proton exchange membranes for fuel cells: Materials and manufacturing. International Journal of Hydrogen Energy, 47(44), 19086-19131. https://doi.org/10.1016/j.ijhydene.2022.04.099
192. Mirfarsi, S. H., Kumar, A., Jeong, J., Adamski, M., McDermid, S., Britton, B., & et al. (2024). High-temperature stability of hydrocarbon-based Pemion® proton exchange membranes: A thermo-mechanical stability study. International Journal of Hydrogen Energy, 50(Part B), 1507-1522. https://doi.org/10.1016/j.ijhydene.2023.07.236
193. Tripathi, B. P., & Shahi, V. K. (2011). Organic-inorganic nanocomposite polymer electrolyte membranes for fuel cell applications. Progress in Polymer Science, 36, 945-979. https://doi.org/10.1016/j.progpolymsci.2010.12.005
194. Gubler, L., Dockheer, S. M., & Koppenol, W. H. (2011). Radical (HO•, H• and HOO•) formation and ionomer degradation in polymer electrolyte fuel cells. Journal of The Electrochemical Society, 158(7), B755. https://doi.org/10.1149/1.3581040
195. Liu, W., & Zuckerbrod, D. (2005). In situ detection of hydrogen peroxide in PEM fuel cells. Journal of The Electrochemical Society, 152, A1165. https://doi.org/10.1149/200421.0492PV
196. Vielstich, W., Lamm, A., & Gasteiger, H. A. (Eds.). (2003). Handbook of fuel cells: fundamentals, technology and applications. Wiley-VCH, Weinheim.
197. Xiao, S., Zhang, H., Li, X., & Mai, Z. (2011). Investigation of the differences between the in situ open circuit voltage test and ex situ fenton test for PEM oxidation characterization. International Journal of Hydrogen Energy, 36(17), 10934-10939. https://doi.org/10.1016/j.ijhydene.2011.05.182
198. Arena, F., Mitzel, J., & Hempelmann, R. (2013). Permeability and diffusivity measurements on polymer electrolyte membranes. Fuel Cells, 13, 58-64. https://doi.org/10.1002/fuce.201200116
199. Andreadis, G., & Tsiakaras, P. (2006). Ethanol crossover and direct ethanol PEM fuel cell performance modeling and experimental validation. Chemical Engineering Science, 61(22), 7497-7508. https://doi.org/10.1016/j.ces.2006.08.028
200. Baschetti, M. G., Minelli, M., Catalano, J., & Sarti, G. C. (2013). Gas permeation in perflurosulfonated membranes: Influence of temperature and relative humidity. International Journal of Hydrogen Energy, 38(27), 11973-11982. https://doi.org/10.1016/j.ijhydene.2013.06.104
201. Bender, G., Angelo, M., Bethune, K., Dorn, S., Thampan, T., & Rocheleau, R. (2009). Method using gas chromatography to determine the molar flow balance for proton exchange membrane fuel cells exposed to impurities. Journal of Power Sources, 193(2), 713-722. https://doi.org/10.1016/j.jpowsour.2009.04.028
202. Möller, L., Rink, M., Kemmer, H., & von Unwerth, T. (2024). Comparing PEMFC state-of-health characteristics obtained by galvanostatic charge method with and without nitrogen flush. Journal of Power Sources, 622, 235366. https://doi.org/10.1016/j.jpowsour.2024.235366
203. Smitha, B., Sridhar, S., & Khan, A. A. (2005). Solid polymer electrolyte membranes for fuel cell applications-A review. Journal of Membrane Science, 259(1-2), 10-26. https://doi.org/10.1016/j.memsci.2005.01.035
204. Wei, P., Sui, Y., Meng, X., & Zhou, Q. (2023). The advances development of proton exchange membrane with high proton conductivity and balanced stability in fuel cells. Journal of Applied Polymer Science, 140(22), e53919. https://doi.org/10.1002/app.53919
205. Lade, H., Kumar, V., Arthanaeeswaran, G., & Ismail, A. F. (2017). Sulfonated poly(arylene ether sulfone) nanocomposite electrolyte membrane for fuel cell applications: A review. International Journal of Hydrogen Energy, 42(2), 1063-1074. https://doi.org/10.1016/j.ijhydene.2016.10.038
206. Choi, P., Jalani, N. H., & Datta, R. (2005). Thermodynamics and proton transport in nafion: II. Proton diffusion mechanisms and conductivity. Journal of The Electrochemical Society, 152(3), E123-E130. https://doi.org/10.1149/1.1859814
207. Tsushima, S., Teranishi, K., & Hirai, S. (2006). Experimental elucidation of proton conducting mechanism in a polymer electrolyte membrane of fuel cell by nuclei labeling MRI. ECS Transactions, 3(1), 91. https://doi.org/10.1149/1.2356127
208. Chen, L., He, Y., & Tao, W. (2014). The temperature effect on the diffusion processes of water and proton in the proton exchange membrane using molecular dynamics simulation. Numerical Heat Transfer, Part A: Applications, 65(3), 216-228. https://doi.org/10.1080/10407782.2013.784677
209. De Grotthuss, C. J. T. (1806). Sur la décomposition de l’eau et des corps qu’elle tient en dissolution à l’aide de l’électricité galvanique. Annales de Chimie, 58, 54-73.
210. Rangel-Cárdenas, A. L., & Koper, G. J. M. (2017). Transport in proton exchange membranes for fuel cell applications - A systematic non-equilibrium approach. Materials, 10, 576. https://doi.org/10.3390/ma10060576
211. Spohr, E. (2005). Proton transport in polymer electrolyte fuel cell membranes. Henderson, D., Holovko, M., & Trokhymchuk, A. (Eds.), Ionic Soft Matter: Modern Trends in Theory and Applications, 361-380. Springer, Dordrecht.
212. Erkartal, M. (2015). Proton conductive polymer/metal organic framework composite membranes. Master’s thesis, Abdullah Gül University, Graduate School of Natural and Applied Sciences, Kayseri, Türkiye.
213. Kreuer, K. D., Rabenau, A., & Weppner, W. (1982). Vehicle mechanism, a new model for the ınterpretation of the conductivity of fast proton conductors. Angewandte Chemie-International Edition in English, 21(3), 208-209. https://doi.org/10.1002/anie.198202082
214. Peckham, T. J., & Holdcroft, S. (2010). Structure-morphology-property relationships of non-perfluorinated proton-conducting membranes. Advanced Materials, 22(42), 4667-4690. https://doi.org/10.1002/adma.201001164
215. Pivovar, B. S. (2006). An overview of electro-osmosis in fuel cell polymer electrolytes. Polymer, 47, 4194-4202. https://doi.org/10.1016/j.polymer.2006.02.071
216. Kreuer, K. D. (2000). On the complexity of proton conduction phenomena. Solid State Ionics, 136-137, 149-160. https://doi.org/10.1016/S0167-2738(00)00301-5
217. Elliott, J. A., & Paddison, S. J. (2007). Modelling of morphology and proton transport in PFSA membranes. Physical Chemistry Chemical Physics, 9(21), 2602-2618. https://doi.org/10.1039/B701234A
218. Li, W. H., Deng, W. H., Wang, G. E., & Xu, G. (2020). Conductive MOFs, EnergyChem, 2(2), 100029. https://doi.org/10.1016/j.enchem.2020.100029
219. Zuo, Z., Fu, Y., & Manthiram, A. (2012). Novel blend membranes based on acid-base interactions for fuel cells. Polymers, 4, 1627-1644. https://doi.org/10.3390/polym4041627

Details

Primary Language

English

Subjects

Hybrid and Electric Vehicles and Powertrains, Automotive Engineering Materials

Journal Section

Review Article

Authors

Turan Alp Arslan ^*
0000-0003-3259-4854
Türkiye

Hüseyin Bayrakçeken
Türkiye

Early Pub Date

December 16, 2025

Publication Date

December 30, 2025

Submission Date

September 26, 2025

Acceptance Date

November 21, 2025

Published in Issue

Year 2025 Volume: 5 Number: 4

DOI

https://doi.org/10.64808/engineeringperspective.1791743

IZ

https://izlik.org/JA88FT32NW

Cite

RIS / Bibtex

APA

Arslan, T. A., & Bayrakçeken, H. (2025). A Comprehensive Review on Fuel Cells: From Fundamental Principles to PEM Fuel Cell Membranes. Engineering Perspective, 5(4), 194-222. https://doi.org/10.64808/engineeringperspective.1791743

AMA

1.Arslan TA, Bayrakçeken H. A Comprehensive Review on Fuel Cells: From Fundamental Principles to PEM Fuel Cell Membranes. engineeringperspective. 2025;5(4):194-222. doi:10.64808/engineeringperspective.1791743

Chicago

Arslan, Turan Alp, and Hüseyin Bayrakçeken. 2025. “A Comprehensive Review on Fuel Cells: From Fundamental Principles to PEM Fuel Cell Membranes”. Engineering Perspective 5 (4): 194-222. https://doi.org/10.64808/engineeringperspective.1791743.

EndNote

Arslan TA, Bayrakçeken H (December 1, 2025) A Comprehensive Review on Fuel Cells: From Fundamental Principles to PEM Fuel Cell Membranes. Engineering Perspective 5 4 194–222.

IEEE

[1]T. A. Arslan and H. Bayrakçeken, “A Comprehensive Review on Fuel Cells: From Fundamental Principles to PEM Fuel Cell Membranes”, engineeringperspective, vol. 5, no. 4, pp. 194–222, Dec. 2025, doi: 10.64808/engineeringperspective.1791743.

ISNAD

Arslan, Turan Alp - Bayrakçeken, Hüseyin. “A Comprehensive Review on Fuel Cells: From Fundamental Principles to PEM Fuel Cell Membranes”. Engineering Perspective 5/4 (December 1, 2025): 194-222. https://doi.org/10.64808/engineeringperspective.1791743.

JAMA

1.Arslan TA, Bayrakçeken H. A Comprehensive Review on Fuel Cells: From Fundamental Principles to PEM Fuel Cell Membranes. engineeringperspective. 2025;5:194–222.

MLA

Arslan, Turan Alp, and Hüseyin Bayrakçeken. “A Comprehensive Review on Fuel Cells: From Fundamental Principles to PEM Fuel Cell Membranes”. Engineering Perspective, vol. 5, no. 4, Dec. 2025, pp. 194-22, doi:10.64808/engineeringperspective.1791743.

Vancouver

1.Turan Alp Arslan, Hüseyin Bayrakçeken. A Comprehensive Review on Fuel Cells: From Fundamental Principles to PEM Fuel Cell Membranes. engineeringperspective. 2025 Dec. 1;5(4):194-222. doi:10.64808/engineeringperspective.1791743

Cited By

AI in Membrane Design and Optimization for Hydrogen Fuel Cells

Membranes

https://doi.org/10.3390/membranes16030097

Effects of combustion and emission characteristics of a port fuel injection HCCI engine fueled with Isopropanol-Butanol-Ethanol and n-Heptane blends

Fuel

https://doi.org/10.1016/j.fuel.2026.139151