In vitro fracture resistance of implant-supported terminal zirconia cantilevered frameworks

Year 2025, , 27 - 32, 29.01.2025

Tabark Shihab Al Bayati , Saja Ali Muhsin

https://doi.org/10.26650/eor.20241338647

Abstract

Purpose: This study aims to investigate the in vitro fracture loads of three different terminal cantilever forms of implant-supported zirconia frameworks.

Materials and Methods: A total of 30 implant-supported zirconia frameworks (Aconia, China) were CAD/ CAM-fabricated and divided into three groups, each with a distal abutment cantilever form design of 5mm: Group A had square cantilevers, Group B had oval cantilevers, and Group C had oval-square cantilevers. Universal testing machine was used to apply vertical loads to the samples, and the fracture loads were recorded. Variance analysis and Tukey's post-hoc tests were applied for statistical evaluation.

Results: There was no significant difference between the mean fracture loads of Group B (587.8±112.2 N) and Group C (591.3 ±81.3 N), but both of these groups exhibited significantly lower fracture loads compared to Group A (893.8±145 N, p<0.001 for each).

Conclusion: Within the scope of this experimental study, it can be concluded that implantsupported terminal square shaped cantilever zirconia frameworks, each measuring 5 mm from the distal abutment, are more likely to exhibit greater resistance to vertical loads compared to their oval and oval-square counterparts.

Keywords

Fixed partial denture, zirconia, implant, fracture load, dental prosthesis

Supporting Institution

N/A

Project Number

N/A

Thanks

Thanks

References

• Norström Saarva, V.; Bjerkstig, G.; Örtorp, A.; Svanborg, P., A three-year retrospective study on survival of ceramic-veneered zirconia (Y-TZP) fixed dental prostheses performed in private practices. Int J Dent 2017; 2017. https://doi.org/10.1155/2017/9618306 google scholar
• De Andrade, G. S.; Kalman, L.; Giudice, R. L.; Adolfi, D.; Feilzer, A. J.; Tribst, J. P. M., Biomechanics of implant-supported restorations. Braz Dent Sci. 2023; 26. https://doi.org/10.4322/bds.2023.e3637 google scholar
• Tang, Y.; Yu, H.; Wang, J.; Qiu, L., Implant Survival and Complication Prevalence in Complete-Arch Implant-Supported Fixed Dental Prostheses: A Retrospective Study with a Mean Follow-up of 5 Years. Int J Oral Maxillofac Implants. 2023; 38. https://doi.org/10.11607/jomi.9808 google scholar
• D’Amico, C.; Bocchieri, S.; Sambataro, S.; Surace, G.; Stumpo, C.; Fiorillo, L., Occlusal load considerations in implant-supported fixed restorations. Prosthesis. 2020; 2:252-65. https://doi.org/10.3390/prosthesis2040023 google scholar
• Walter, L.; Greenstein, G., Utility of measuring anterior-posterior spread to determine distal cantilever length off a fixed implant-supported full-arch prosthesis: a review of the literature. J Am Dent Assoc. 2020;151:790-95. https://doi.org/10.1016/j.adaj.2020.06.016 google scholar
• Haroyan-Darbinyan, E.; Romeo-Rubio, M.; Del Rio-Highsmith, J.; Lynch, C. D.; Castillo-Oyagüe, R., Thermo-mechanical behavior of alternative material combinations for full-arch implant-supported hybrid prostheses with short cantilevers. J Dent. 2023; 132: 104470. https://doi.org/10.1016Zi .j dent.2023.104470 google scholar
• Alshamrani, A.; Alhotan, A.; Kelly, E.; Ellakwa, A., Mechanical and Biocompatibility Properties of 3D-Printed Dental Resin Reinforced with Glass Silica and Zirconia Nanoparticles: In Vitro Study. Polym. 2023; 15:2523. https://doi.org/10.3390/polym15112523 google scholar
• Branco, A. C.; Colaço, R.; Figueiredo-Pina, C. G.; Serro, A. P., Recent Advances on 3D-Printed Zirconia-Based Dental Materials: A Review. Mater. 2023; 16:1860. https://doi.org/10.3390/ma16051860 google scholar
• Sola-Ruiz, M. F.; Leon-Martine, R.; Labaig-Rueda, C.; Selva-Otalaorrouchi, E.;Agustın-Panadero, R., Clinical outcomes of veneered zirconia anterior partial fixed dental prostheses: A 12-year prospective clinical trial. J Prosthet Dent. 2022; 127: 846-51. https://doi .org/ 10.1016/j .prosdent.2020.09.046 google scholar
• Liu, C.; Liao, Y.; Jiao, W.; Zhang, X.; Wang, N.; Yu, J.; Liu, Y. T.; Ding, B., High Toughness Combined with High Strength in Oxide Ceramic Nanofibers. Adv Mater. 2023. 2304401. https://doi.org/10.1002/adma.202304401 google scholar
• Zhang, Y.; Kelly, J. R., Dental ceramics for restoration and metal veneering. Dent Clin. 2017; 61:797-819. https://doi.org/10.1016/j.cden.2017.06.005 google scholar
• Abbas, M.; Ramesh, S.; Tasfy, S.; Lee, K. S.; Gul, M.; Aljaoni, B., Effect of sintering additives on the properties of alumina toughened zirconia (ATZ). MRS Commun. 2023; 19. https://doi.org/10.1557/s43579-023-00400-y google scholar
• Lancellotta, V.; Pagano, S.; Tagliaferri, L.; Piergentini, M.; Ricci, A.; Montecchiani, S.; Saldi, S.; Chierchini, S.; Cianetti, S.; Valentini, V., Individual 3-dimensional printed mold for treating hard palate carcinoma with brachytherapy: A clinical report. J Prosthet Dent. 2019; 121(4):690-93. https://doi.org/10.1016/j.prosdent.2018.06.016 google scholar
• Meirowitz, A.; Bitterman, Y.; Levy, S.; Mijiritsky, E.; Dolev, E., An in vitro evaluation of marginal fit zirconia crowns fabricated by a CAD-CAM dental laboratory and a milling center. BMC Oral Health. 2019; 19:1-6. https://doi.org/10.1186/s12903-019-0810-9 google scholar
• Reuss, J. M.; Reuss, D.; Rutten, L.; Mateo, B.; Vilaboa, B. R.; Vilaboa, D. R., Facially Driven Rehabilitation of a Cleft Lip and Palate Patient with an Implant-Supported Complete Fixed Dental Prosthesis: Outcome of a Multidisciplinary Approach. Int J Prosthodont. 2023; 36. https://doi.org/10.11607/ijp.7622 google scholar
• Shokry, T. E., Evaluation of Fracture Resistance of Long Span Implant Supported Fixed Dental Prostheses Fabricated from Different CAD/CAM Materials. Al-Azhar J Dent Sci. 2023; 26:15-25. https://doi.org/10.21608/ajdsm.2022.115225.1286 google scholar
• Hu, M.-L.; Lin, H.; Zhang, Y.-D.; Han, J.-M., Comparison of technical, biological, and esthetic parameters of ceramic and metal-ceramic implant-supported fixed dental prostheses: A systematic review and meta-analysis. J Prosthet Dent. 2020; 124:26-35. e2. https://doi.org/10.1016Zj.prosdent.2019.07.008 google scholar
• Yin, S.; Cizek, J.; Chen, C.; Jenkins, R.; O'Donnell, G.; Lupoi, R., Metallurgical bonding between metal matrix and core-shelled reinforcements in cold sprayed composite coating. Scr Mater. 2020; 177:49-53. https://doi.org/10.3390/ma12142252 google scholar
• Budala, D. G.; Lupu, C. I.; Vasluianu, R. I.; loanid, N.; Butnaru, O. M.; Baciu, E.-R., A Contemporary Review of Clinical Factors Involved in Speech-Perspectives from a Prosthodontist Point of View. Medicina. 2023; 59:1322. https://doi.org/10.3390/medicina59071322 google scholar
• Dorado, S.; Arias, A.; Jimenez-Octavio, J. R., Biomechanical Modelling for Tooth Survival Studies: Mechanical Properties, Loads and Boundary Conditions—A Narrative Review. Mater. 2022; 15:7852. https://doi.org/10.3390/ma15217852 google scholar
• Matta, R. E.; Eitner, S.; Stelzer, S. P.; Reich, S.; Wichmann, M.; Berger, L., Ten-year clinical performance of zirconia posterior fixed partial dentures. J Oral Rehabil. 2022; 49:71-80. https://doi.org/10.1111/joor.13276/v1/review1 google scholar
• Horsch, L.; Kronsteiner, D.; Rammelsberg, P., Survival and complications of implant-supported cantilever fixed dental prostheses with zirconia and metal frameworks: A retrospective cohort study. Clin Implant Dent Relat Res. 2022. https://doi.org/10.1111/cid.13125 google scholar
• Karasan, D.; Canay, S.; Sailer, I.; Att, W., Zirconia Cantilever Fixed Dental Prostheses Supported by One or Two Implants: An In Vitro Study on Mechanical Stability and Technical Outcomes. Int J Oral Maxillofac Implants. 2022; 37. https://doi.org/10.11607/jomi.8953 google scholar
• Takaba, M.; Tanaka, S.; Ishiura, Y.; Baba, K., Implant-supported fixed dental prostheses with CAD/CAM-fabricated porcelain crown and zirconia-based framework. J Prosthodont on Complex Restorations. 2016; 225-31. https://doi.org/10.1111/jopr.12001 google scholar
• D'Albis, G.; D'Albis, V.; Susca, B.; Palma, M.; Al Krenawi, N., Implant-supported zirconia fixed partial dentures cantilevered in the lateral-posterior area: A 4-year clinical results. J Dent Res Dent Clin Dent Prospects. 2022; 16: 258 63. https://doi.org/10.34172/joddd.2022.041 google scholar
• Lee, B.; Oh, K. C.; Haam, D.; Lee, J.-H.; Moon, H.-S., Evaluation of the fit of zirconia copings fabricated by direct and indirect digital scanning procedures. J Prosthet Dent. 2018; 120: 225-31. https://doi.org/10.1016Zj.prosdent.2017.08.003 google scholar
• Alao, A.-R.; Stoll, R.; Zhang, Y.; Yin, L., Influence of CAD/CAM milling, sintering and surface treatments on the fatigue behavior of lithium disilicate glass ceramic. J Mech Behav Biomed Mater. 2021; 113: 104133. https://doi.Org/10.1016/j.jmbbm.2020.104133 google scholar
• Sancho-Puchades, M.; Crameri, D.; Özcan, M.; Sailer, I.; Jung, R.; Hammerle, C.; Thoma, D., The influence of the emergence profile on the amount of undetected cement excess after delivery of cement-retained implant reconstructions. Clin Oral Implants Res. 2017; 28: 1515-22. https://doi.org/10.1111/clr.13020 google scholar
• Gehrke, P.; Bleuel, K.; Fischer, C.; Sader, R., Influence of margin location and luting material on the amount of undetected cement excess on CAD/CAM implant abutments and cement-retained zirconia crowns: an in-vitro study. BMC Oral Health. 2019; 19: 1-12. https://doi.org/10.1186/s12903-019-0809-2 google scholar
• Al-Sanea, A.; Mutlu, I.; Kişioğlu, Y.; Mohamed, E., The Effect of V-Thread and Square Thread Dental Implants on Bone Stresses. J Biomim Biomater Biomed Eng. 2023; 60: 83-96. https://doi.org/10.4028/p-3qasy2 google scholar
• Novais, M.; Silva, A. S.; Mendes, J.; Barreiros, P.; Aroso, C.; Mendes, J. M., Fracture Resistance of CAD/CAM Implant-Supported 3Y-TZP-Zirconia Cantilevers: An In Vitro Study. Mater. 2022; 15: 6638. https://doi.org/10.3390/ma15196638 google scholar
• Ghavami-Lahiji, M.; Firouzmanesh, M.; Bagheri, H.; Kashi, T. S. J.; Razazpour, F.; Behroozibakhsh, M., The effect of thermocycling on the degree of conversion and mechanical properties of a microhybrid dental resin composite. Restor Dent Endod. 2018; 43. https://doi.org/10.5395/rde.2018.43.e26 google scholar
• Gomes, R. S.; Bergamo, E. T. P.; Bordin, D.; Cury, A. A. D. B., The substitution of the implant and abutment for their analogs in mechanical studies: In vitro and in silico analysis. Mater Sci Eng: C. 2017; 75: 50-54. https://doi.org/10.1016Zj.msec.2017.02.034 google scholar
• Stamenkovic, D.; Popovic, M.; Rudolf, R.; Zrilic, M.; Raic, K.; Duricic, K. O.; Stamenkovic, D., Comparative Study of the Microstructure and Properties of Cast-Fabricated and 3D-Printed Laser-Sintered Co-Cr Alloys for Removable Partial Denture Frameworks. Mater. 2023; 16: 3267. https://doi.org/10.3390/ma16083267 google scholar
• Sadid-Zadeh, R.; Lin, K.; Li, R.; Nagy, K., Fracture strength of screw-retained zirconia crowns assembled on zirconia and titanium implants. J Prosthodont. 2023. https://doi.org/10.1111/jopr.13683 google scholar