The effects of various scaling instruments on the surface roughness of monolithic zirconia and lithium disilicate

Year 2023, Volume: 57 Issue: 3, 133 - 137, 28.09.2023

Mustafa Yılmaz Esra Demir Emin Orkun Olcay

https://doi.org/10.26650/eor.20231109111

Abstract

Purpose: This in vitro study aims to evaluate the effects of plastic piezoelectric maintenance tips on the surface roughness of monolithic lithium disilicate and zirconia.
Materials and Methods: Fifty-four lithium disilicate and 54 zirconia disks were prepared with CAD/CAM. On each material, scaling with a stainless-steel curette or with a piezoelectric device using either a steel or plastic tip was conducted. The surface roughness of the materials before and after the instrumentation was measured with a profilometer. The changes in roughness of the materials according to the scaling methods were analyzed with generalized linear models. Mann-Whitney U with Bonferroni correction was used for between-group comparisons.
Results: The instruments caused surface alterations on both materials (p=0.001), while the roughness change of lithium disilicate and zirconia specimens did not demonstrate any statistically significant difference with each other (p=0.274). However, the curette was found to cause significantly more (p=0.019) roughness change (0.259 ±0.405) on the specimens than the piezoelectric plastic tip (0.060 ±0.238).
Conclusion: Piezoelectric scalers with plastic tips cause less deterioration on monolithic zirconia and lithium disilicate surfaces when compared to stainless-steel hand curettes.

Keywords

instrumentation, curette, plastic, ultrasonic, piezoelectric

Supporting Institution

Biruni University Technology Transfer Office (BIRATTO)

Project Number

Biruni-BAP-2019-02-20

References

• Sbordone L, Ramaglia L, Gulletta E, Iacono V. Recolonization of the subgingival microflora after scaling and root planing in human periodontitis. J Periodontol 1990;61:579–84. google scholar
• Ioannou I, Dimitriadis N, Papadimitriou K, Sakellari D, Vouros I, Konstantinidis A. Hand instrumentation versus ultrasonic debridement in the treatment of chronic periodontitis: a randomized clinical and microbiological trial. J Clin Periodontol 2009;36:132–41. google scholar
• Leknes KN. The Influence of Anatomic and Iatrogenic Root Surface Characteristics on Bacterial Colonization and Periodontal Destruction: A Review. J Periodontol 1997;68:507–16. google scholar
• Blatz MB, Conejo J. The current state of chairside digital dentistry and materials. Dent Clin 2019;63:175–97. google scholar
• Nejatidanesh F, Savabi G, Amjadi M, Abbasi M, Savabi O. Five year clinical outcomes and survival of chairside CAD/CAM ceramic laminate veneers—a retrospective study. J Prosthodont Res 2018;62:462–7. google scholar
• Reich S, Wichmann M, Nkenke E, Proeschel P. Clinical fit of all‐ceramic three‐unit fixed partial dentures, generated with three different CAD/CAM systems. Eur J Oral Sci 2005;113:174–9. google scholar
• Belli R, Wendler M, de Ligny D, Cicconi MR, Petschelt A, Peterlik H, et al. Chairside CAD/CAM materials. Part 1: Measurement of elastic constants and microstructural characterization. Dent Mater 2017;33:84–98. google scholar
• Raigrodski AJ, Chiche GJ. The safety and efficacy of anterior ceramic fixed partial dentures: a review of the literature. J Prosthet Dent 2001;86:520–5. google scholar
• Albakry M, Guazzato M, Swain MV. Biaxial flexural strength, elastic moduli, and x-ray diffraction characterization of three pressable all-ceramic materials. J Prosthet Dent 2003;89:374–80. google scholar
• Vigolo P, Motterle M. An in vitro evaluation of zirconia surface roughness caused by different scaling methods. J Prosthet Dent 2010;103:283–7. google scholar
• Albashaireh ZSM, Ghazal M, Kern M. Two-body wear of different ceramic materials opposed to zirconia ceramic. J Prosthet Dent 2010;104:105–13. google scholar
• Tong H, Tanaka CB, Kaizer MR, Zhang Y. Characterization of three commercial Y-TZP ceramics produced for their high-translucency, high-strength and high-surface area. Ceram Int 2016;42:1077–85. google scholar
• Elsaka SE. Optical and mechanical properties of newly developed monolithic multilayer zirconia. J Prosthodont 2019;28:e279–84. google scholar
• Stawarczyk B, Mandl A, Liebermann A. Modern CAD/CAM silicate ceramics, their translucency level and impact of hydrothermal aging on translucency, Martens hardness, biaxial flexural strength and their reliability. J Mech Behav Biomed Mater 2021;118:104456. google scholar
• Zarone F, Di Mauro MI, Ausiello P, Ruggiero G, Sorrentino R. Current status on lithium disilicate and zirconia: A narrative review. BMC Oral Health 2019;19. google scholar
• Checketts MR, Turkyilmaz I, Asar NV. An investigation of the effect of scaling-induced surface roughness on bacterial adhesion in common fixed dental restorative materials. J Prosthet Dent 2014;112:1265–70. google scholar
• Vigolo P, Buzzo O, Buzzo M, Mutinelli S. An In Vitro Evaluation of Alumina, Zirconia, and Lithium Disilicate Surface Roughness Caused by Two Scaling Instruments. J Prosthodont 2017;26:129–35. google scholar
• unkel J, Heinecke A, Flemmig TF. A systematic review of efficacy of machine-driven and manual subgingival debridement in the treatment of chronic periodontitis. J Clin Periodontol 2002;29:72–81. google scholar
• Kocher T, Rosin M, Langenbeck N, Bernhardt O. Subgingival polishing with a teflon-coated sonic scaler insert in comparison to conventional instruments as assessed on extracted teeth: (II). Subgingival roughness. J Clin Periodontol 2001;28:723-9. google scholar
• Singh S, Uppoor A, Nayak D. A comparative evaluation of the efficacy of manual, magnetostrictive and piezoelectric ultrasonic instruments - an in vitro profilometric and SEM study. J Appl Oral Sci 2012;20. google scholar
• Coldiron NB, Yukna RA, Weir J, Caudill RF. A Quantitative Study of Cementum Removal With Hand Curettes. J Periodontol 1990;61:293–9. google scholar
• Zappa U, Cadosch J, Simona C, Graf H, Case D. In Vivo Scaling and Root Planing Forces. J Periodontol 1991;62:335–40. google scholar
• Walmsley AD, Lea SC, Landini G, Moses AJ. Advances in power driven pocket/root instrumentation. J Clin Periodontol 2008;35:22–8. google scholar
• Baek S-H, Shon W-J, Bae K-S, Kum K-Y, Lee W-C, Park Y-S. Evaluation of the safety and efficiency of novel metallic ultrasonic scaler tip on titanium surfaces. Clin Oral Implants Res 2012;23:1269–74. google scholar
• Lee JH, Kim SH, Han JS, Yeo ISL, Yoon HI, Lee J. Effects of ultrasonic scaling on the optical properties and surface characteristics of highly translucent CAD/CAM ceramic restorative materials: An in vitro study. Ceram Int 2019; 45:14594-601. google scholar