Cryogenic Process Optimization for Medium Carbon Spring Steels

Abstract

Spring steels are extensively used in load bearing elements of road and railway vehicles. The basic microstructure of these parts, which are subjected to high cycle fatigue, is tempered martensite. The improvement of the mechanical properties of these steels can only be achieved by modifying the material microstructure. In the microstructure of steel parts produced in different diameters, the formation of retained austenite and residual stresses is inevitable. For spring steels operating under heavy load, it is very important to remove the residual austenite form. Although the cryogenic treatment process is applied as a standard process for high alloyed and high carbon steels, it is not optimized for low alloy and medium carbon steels. In this study, different types of cryogenic treatment (Deep Cryogenic Treatment (DCT) / Shallow Cryogenic Treatment (SCT)) and tempering applications were carried out on spring steels with different alloying levels. With the outputs obtained from these experiments, optimization of cryogenic process parameters for medium carbon spring steels is aimed.

Keywords

• Steels
• Cryogenic treatment
• Alloying

References

1. D Das, D., Ray, K. K., & Dutta, A. K. (2009). Influence of temperature of sub-zero treatments on the wear behaviour of die steel. Wear, 267(9-10), 1361-1370. D Das, D., Dutta, A. K., & Ray, K. K. (2010). Structure-property correlation of cryotreated AISI D2 steel. In Advanced Materials Research (pp. 49-54). Trans Tech Publications Ltd.
2. Özbek, N. A., Çiçek, A., Gülesin, M., & Özbek, O. (2014). Investigation of the effects of cryogenic treatment applied at different holding times to cemented carbide inserts on tool wear. International Journal of Machine Tools and Manufacture, 86, 34-43. https://doi.org/10.1016/j.ijmachtools.2014.06.007
3. Özden, R. C., & Anik, M. (2020). Enhancement of the mechanical properties of EN52CrMoV4 spring steel by deep cryogenic treatment. Materialwissenschaft Und Werkstofftechnik, 51(4), 422-431. https://doi.org/10.1002/mawe.201900122
4. Özden, R. C., Lökçü, E., & Anik, M. (2020). Effects of Deep Cryogenic Treatment on the Mechanical Properties of Medium Carbon Spring Steels. The Eurasia Proceedings of Science Technology Engineering and Mathematics, 11, 48-52.
5. Senthilkumar, D., & Rajendran, I. (2012). Optimization of deep cryogenic treatment to reduce wear loss of 4140 steel. Materials and Manufacturing Processes, 27(5), 567-572. https://doi.org/10.1080/10426914.2011.593237
6. Vahdat, S. E., Nategh, S., & Mirdamadi, S. (2013). Microstructure and tensile properties of 45WCrV7 tool steel after deep cryogenic treatment. Materials Science and Engineering: A, 585, 444-454. https://doi.org/10.1016/j.msea.2013.07.057
7. Villa, M., Hansen, M. F., & Somers, M. A. (2017). Martensite formation in Fe-C alloys at cryogenic temperatures. Scripta Materialia, 141, 129-132. https://doi.org/10.1016/j.scriptamat.2017.08.005