Physicochemical, Morphological and Anticorrosive Properties of Electrodeposited ZnNi Alloy Coating

Abstract

Corrosion in its many forms is a major problem for many types of materials, extending from machining to manufacturing and daily use. In fact, it affects practically all engineering projects, from the biggest to the smallest: energy production, construction, transport, medical sector, electronics, etc. Consequently, corrosion generates both economic and environmental problems. To prevent corrosion and preserve materials' durability, several protection methods can be applied. These included protection by applying a coating on the metal surface. In this context, Zinc based alloy coatings have attracted much interesting scientific community because of their excellent mechanical and anti-corrosive properties. In the present work, ZnNi coatings were electrodeposited on steel substrates using a chloride bath containing ammonium salts. The effect of some experimental parameters, namely, potential and metal ion concentration ratio on the deposition kinetics of ZnNi system as well as on its physicochemical, morphological and anticorrosive properties has been investigated. For this purpose, an appropriate experimental work was performed by using both electrochemical (cyclic voltammetry, chronoamperometry, open circuit potential, potentiodynamic polarization) and nonelectrochemical (SEM-EDX) analysis methods. Based on the obtained results, it has been revealed that simultaneous codeposition of both elements Zn and Ni is possible in our experimental conditions. However, deposition kinetics exhibited a strong dependence on explored parameters. Also, morphological aspect and chemical composition of deposits are strongly influenced by metal ion concentration ratio. Investigation of corrosion behaviour confirms the protective effect of coatings acted as a sacrificial anode. Furthermore, increasing Ni content in the deposits induces a significant enhancement in corrosion resistance. Thus, Zn-Ni alloy coatings prepared from the Ni(II)-rich bath exhibited better corrosion resistance.

Keywords

• Corrosion
• Steel
• ZnNi alloy coating
• Electrodeposition

References

1. Benfedda, B., Boudinar, S., & Mezine, Z. (2024). Physicochemical, morphological and anticorrosive properties of electrodeposited ZnNi alloy coating. The Eurasia Proceedings of Science, Technology, Engineering & Mathematics (EPSTEM), 28, 492-501.