Physical and morphological Properties of Polycarbonate (PC)/Acrylonitrile-Butadiene-Styrene (ABS)/Waste Urea Formaldehyde (WUF) Polymer Blends

Abstract

In this study, high density polyethylene matrix contributes to ground urea formaldehyde powder is handled as 0, 5, 10, 20 and 30 wt% ratio will be mixed in the extruder. Mixture obtained from the extruder to be granulated and then the granules will be obtained as appropriate standard test sample of the injection molding machine. Physical and morphological tests will be applied such as heat deflection temperature, vicat softening point, melt flow index, moisture content, limit oxygen index, war rate and static coefficient of friction. Also, SEM examination will be conducted to evaluate the microstructure of urea formaldehyde particles as well as material distribution in these experiments.  

Keywords

• Polycarbonate,Acrylonitrile butadiene styrene,Urea formaldehyde,Physical properties,Polymer blends

References

1. Peydro, M.A., Juarez, D., Caballero, S.S., Ferrando, R.P., Annals of orade university, Fascicle of management and tech. Eng., Issue: 1 May 2014. Thomas, R., Vijayan, P., Thomas, S., Recent Developments in Polymer Recycling, 2011: 121-153. Evelin, D. B., Chris, C. W., Montgomery, T. S., Journal of Applied Polymer Science, 77, 3220 –3227, 2000. Zhenhua, L., Yunxuan, L., Poly. Plast. Tech. and Eng., 51, 750, 2012. Karuppiah, K.S., Bruck, A.L., Sundararajan, S., Wang, J., Lin, Z., Xu, Z.H., Li, X., Acta Biomaterialia, 4, 1401, 2008. Bruck, A.L., Karuppiah, K.S., Sundararajan, S., Wang, J., Lin, Z., J Biomed Mater Res B Appl Biomater., 93(2), 351, 2010. Tasdemir, M., Miskioglu, I., Int. J. of Mat. And Manufacturing, 4/2, 95-99, 2016. Taşdemir, M., Ersoy, S., Romanian journal of materials, 3/ 44, 257-264, 2014. Taşdemir, M., Yerleşen, U.,Romanian journal of materials, 1/ 45, 59-66, 2015. Balart, R., Lopez, J., Garcia, D., Salvador, M.D., European Polymer Journal, vol. 41, pp. 2150- 2160, Sep 2005.