Research Article

SCADA Assisted Control of Biological Treatment Plants: Subaşi Example

Number: 4 December 4, 2018
  • Aydin Gullu
EN

SCADA Assisted Control of Biological Treatment Plants: Subaşi Example

Abstract

A disadvantage of collective life is the problem of collective waste. Water is the most important source of life. The fresh water obtained from the nature is contaminated and returned to the nature. In bulk settlements, there is a large amount of waste water. High amounts of waste water can not be cleaned naturally in a rapid manner. For this reason wastewater treatment facilities have been established in settlements. Waste water entering these facilities is cleaned by biological methods and given to nature. The purification is made of bacteria-based. In the treatment process, the number of bacteria and the amount of water entering and leaving the water cleaning are measured and process control is carried out. In this study, control of a wastewater treatment plant located in Edirne Subaşı was done by PLC. Sensors located in the field are processed by PLC and data is transferred to SCADA. The equipment was controlled on the SCADA according to the received data. Level control, oxygen control, flow control, dosing control are some of these controls. All these inspections can be carried out on a single center via SCADA.

Keywords

References

  1. Aydoğdu, Ö., Hasırcı, M. G., & Akçay, H. Bir Entegre Et Tesisinde SCADA Tabanlı Endüstriyel Kontrol Uygulaması. In: ELECO. Bejan, C. A., Iacob, M., & Andreescu, G.-D. (2009). SCADA automation system laboratory, elements and applications. Paper presented at the Intelligent Systems and Informatics, 2009. SISY'09. 7th International Symposium on. Bolton, W. (2015). Programmable logic controllers: Newnes. Grady Jr, C. L., Daigger, G. T., Love, N. G., & Filipe, C. D. (2011). Biological wastewater treatment: CRC press. Henze, M., van Loosdrecht, M. C., Ekama, G. A., & Brdjanovic, D. (2008). Biological wastewater treatment: IWA publishing. Li, Y., Tang, C., & Liu, K. (2011). PID parameter self-setting method base on S7–1200 PLC. Paper presented at the Electrical and Control Engineering (ICECE), 2011 International Conference on. Mühendislik, S. (2015). Subaşi (Edirne) Atiksu Aritma Tesisi Kesin Projesi Proje Raporu. Retrieved from Webb, J. W., & Reis, R. A. (2002). Programmable logic controllers: principles and applications: Prentice Hall PTR.

Details

Primary Language

English

Subjects

Engineering

Journal Section

Research Article

Authors

Aydin Gullu This is me

Publication Date

December 4, 2018

Submission Date

November 21, 2018

Acceptance Date

-

Published in Issue

Year 2018 Number: 4

APA
Gullu, A. (2018). SCADA Assisted Control of Biological Treatment Plants: Subaşi Example. The Eurasia Proceedings of Science Technology Engineering and Mathematics, 4, 127-131. https://izlik.org/JA43HT57NU