Effects of Different Solvents on the Shear Bond Strength of A Nano Additive Composite

Year 2020, , 12 - 17, 30.06.2020

Gökhan Dokumacıgil , Pınar Atalı , Bülent Topbaşı

https://doi.org/10.35333/ERD.2020.181

Abstract

One of the most critical steps of the resin restoration technique is adhesion. Mechanical stress during the restoration can displace or even causes fracture the restoration. Recently, new self-etch adhesive materials can reach optimal shear bond strengths although they aren’t as good as etch and rinse technique, which is gold standard. Their solvent type may classify adhesives into many groups.
Aim: This study evaluated the effect of solvents to shear bond strength (SBS) and how they have been effected by the aging procedure; immediate and after thermo-cycle.
Material and methods: Forty intact human molars were randomly divided in 4 groups. While 2 groups were restored by using ethanol/water containing adhesive (Tetric N-Bond Universal, Ivoclar, Liechtenstein) the others were restored by using 3 different solvent containing adhesive (Optibond All-in-one, Kerr, USA) which include; acetone, ethanol and water. And both of two groups were subdivided as immediate and after termocycled aging. Tetric N-Ceram (Ivoclar, Liechtenstein) was used as composite in all groups. The immediate groups were tested after 24 hour following the polymerization and the termocycled groups were tested after 10000-termocycled application. P <0.05 significance level was used all hypothesis tests.
Result: Immediate and termocycled groups showed statically similar (SBS). But all groups showed lower bond strength after thermo-cycle.
Conclusion: While the SBS values weren’t affected by solvent type, the thermo-cycle aging reduced the SBS values in all groups. The major factor for the decrease of the SBS values is the hydrolysis of resin-dentin interface components. (1)

Keywords

Adhesive, Solvent, Composite, Shear Bond Strenght

Project Number

SAG-C-DUP-120917-0505

References

• 1. Hashimoto M., Fujita S., Nagano F., Ohno H. and Endo K. (2010) Ten-years degradation of resin-dentin bonds. European Journal of Oral Sciences , 118, p.404-410. DOI: 10.1111/j.1600-0722.2010.00744.x
• 2. Ozcan M. , Dundar M. and Comlekoglu ME (2012) Adhesion concepts in dentistry: tooth and material aspects, Journal of Adhesion Science and Technology, 26:24, 2661-2681, DOI: 10.1080/01694243.2012.691038 3. Perdigao J. (2007) New Developments in Dental Adhesion, The Dental Clinics of North America, 51, 333-357, DOI: 10.1016/j.cden.2007.01.001
• 4. Tay FR. and Pashley DH. (2009) Biomimetic Remineralization of Resin-bonded Acid-etched Dentin. Journal of Dental Research , 88(8), p.719-724. DOI: 10.1177/0022034509341826
• 5. Moszner, N., Salz U., and Zimmermann J. (2005) Chemical aspects of self-etching enamel–dentin adhesives: a systematic review. Dental Materials,. 21(10): p. 895-910, DOI: 10.1016/j.dental.2005.05.001
• 6. Lee SB., Cabezas CG, Kim KM, Kim KN., Kuroda K. (2015) Catechol-Functionalized Synthetic Polymer as a Dental Adhesive to Contaminated Dentin Surface for a Composite Restoration. American Chemical Society Biomacromolecules, 16, p.2265-2275 DOI: 10.1021/acs.biomac.5b00451
• 7. Van Landuyt KL., Mine A., De Munck J., Countinho E., Peumans M., Jaezcques S., Lambrechts P and Van Meerbeek B. (2008) Technique sensitivity of water-free one-step adhesives. Dental Materials, 24, p.1258-1267. DOI: 10.1016/j.dental.2008.02.003
• 8. Erickson RL, Barkmeier WW and Kimmes NS (2009) Bond strength of self-etch adhesives to pre- etched enamel. Dental Materials ;25:1187-1194, DOI: 10.1016/j.dental.2009.04.004
• 9. (Peumans M., De Munck J., Van Landuyt K., Lambrechts P., and Van Meerbeek B. (2007) “Five-year clinical effectiveness of a two-step self-etching adhesive,” Journal of Adhesive Dentistry, vol. 9, no. 1, pp. 7–10 10. Faye B., Sarr M., Bane K., Aidara AW., Niang SO., and Kane AW. (2015) One-Year Clinical Evaluation of the Bonding Effectiveness of a One-Step, Self-Etch Adhesive in Noncarious Cervical Lesion Therapy International Journal of Dentistry Volume, p.5 DOI: 10.1155/2015/984065
• 11. S. Kubo S., H. Yokota H. and Y. Hayashi Y. (2009) “Two-year clinical evaluation of one-step self-etch systems in non-carious cervical lesions,” Journal of Dentistry, vol. 37, no. 2, pp. 149–155. DOI: 10.1016/j.jdent.2008.10.008
• 12. Reis, AF., Oliveira MT. , Giannini M., De Goes MF. , and Rueggeberg FA. (2003). The effect of organic solvents on one-bottle adhesives' bond strength to enamel and dentin. Operative Dentistry 28 6:700–706
• 13. Nayak RS., Valecha S., Pasha A., Mamatha J., Khanna B. and Shafiuddin B. (2015) A Comparison of Shear Bond Strength of New Nanofilled Composite and Nano-Ionomer Restorative Materials with Traditional Adhesive Material for Orthodontic Bracket Bonding: An In Vitro Study, Journal of International Oral Health 2015; 7(10):70-76
• 14. Pashley DH. , Agee KA. , Carvalho RM., Lee WK., Tay F.R., and Callison TE.(2003) Effects of water-free polar solvents on the tensile properties of demineralized dentin. Dental Materials 19 5:347–352, DOI: 10.1016/S0109-5641(02)00065-9
• 15. Manso AP., Marquesina Jr. L., Silva SMA., Pashley DH., Tay FR. And Carvalho RM. (2008) Stability of wet versus dry bonding with different solvent-based adhesives. Dental Materials 24, p.476-482. DOI: 10.1016/j.dental.2007.04.009
• 16. Bektas OO., Eren D., Siso SH. and Akin GE. (2012) Effect of thermocycling on the bond strength of composite resin to bur and laser treated composite resin. Lasers in Medical Science, 27 (4), p.723-728, DOI: 10.1007/s10103-011-0958-2
• 17. Dundar M., Ozcan M., Gökçe B., Comlekoglu E., Leite F. And Valandro LF. (2007) Comparision of two bond strength testing methodologies for bilayered all-ceramics. Dental Materials, 23, p.630-636, DOI: 10.1016/j.dental.2006.05.004
• 18. Spreafice D., Semeraro S., Mezzanzanica D., Re D., Gagliani M., Tanaka T., Sano H. and Sidhu SK. (2006) The effect of the air-blowing step on the technique sensitivity of four different adhesive systems. Journal of Dentistry, 34, p.237-244, DOI: 10.1016/j.dent.2005.06.004