Hızlandırılmış Yapay Yaşlandırma Uygulamasının CAD-CAM Materyallerinin Renklenmesi Üzerindeki Etkisi

Year 2021, Volume: 5 Issue: 1, 19 - 28, 19.06.2021

Deniz Yılmaz Lale Karaağaçlıoğlu Burak Yilmaz

https://doi.org/10.29228/erd.4

Abstract

Amaç: Farklı kimyasal kompozisyona sahip CAD-CAM bloklara uygulanan glaze ve mekanik parlatma işlemlerinin hızlandırılmış yapay yaşlandırma (AAA) uygulaması sonrası renklenme (ΔE00) üzerindeki etkisini değerlendirmek.
Gereç ve Yöntemler: Çalışmamız üç ana gruptan oluşmaktadır. 50 örnek CAD-CAM bloklarından (Vita Mark II, Vita Suprinity ve Vita Enamic) elde edilerek kimyasal kompozisyonlarına göre mekanik parlatma veya glaze teknikleri uygulanarak Mp, Mg, Sp, Sg, Ep olmak üzere 5 alt gruba ayrılmıştır (n=10). AAA uygulaması QUV cihazı yardımıyla ultraviyole ışık ve su spreyi altında 300 saat süreyle yapılmıştır. Örneklerin AAA yöntemi uygulanmadan önce ve uygulandıktan sonra L*, a*, b* değerleri kalibre edilmiş spektrofotometre kullanılarak kaydedilmiştir. L*, a*, b* değerleri kullanılarak materyallerde oluşan renk farkı (ΔE00) değerleri hesaplanmıştır. İstatistiksel analiz için Bonferroni Düzeltmesi yapılarak Kruskal Wallis ve Mann Whitney U Testleri kullanılmıştır (alfa=.05).
Bulgular: Mekanik parlatma tekniği Mp örneklerde istatistiksel olarak en yüksek ΔE00 değeri göstermiştir (p<.001). Aynı zamanda Ep grubu örnekler Sp grubu örneklerden istatistiksel olarak daha yüksek ΔE00 değeri göstermiştir (p=.002). Glaze tekniği kullanılan örneklerde ise Sg grubu örnekler Mg grubu örneklerden istatistiksel olarak daha yüksek ΔE00 değeri göstermiştir (p=.005). Mekanik parlatma tekniği Mp grubu örneklerde istatistiksel olarak en düşük ΔL’ (p=.003) değerini gösterirken Ep grubu örneklerde en yüksek ΔC’ (p<.001) ve ΔH’ (p<.001) değerlerini göstermiştir. Glaze tekniği kullanılan örneklerde ise ΔL’(p=.796), ΔC’ (p=.218) ve ΔH’ (p=.529) değerleri açısından istatistiksel olarak anlamlı fark bulunmamıştır.
Sonuç: AAA işlemi mekanik parlatma tekniği kullanılan örneklerde Enamic materyalinde ΔC’ ve ΔH’ değerlerini yükseltirken, Mark II materyalinde ΔL’ değerini düşürerek materyallerin kroma, renk tonu ve parlaklık değerlerini etkilemiştir.
Anahtar Kelimeler: CAD-CAM, renk, yaşlandırma

Keywords

CAD-CAM, renk, yaşlandırma

Supporting Institution

Ankara Üniversitesi Bilimsel Araştırma Projeleri Müdürlüğü

Project Number

16L0234005

Thanks

Bu araştırma Ankara Üniversitesi Bilimsel Araştırma Projeleri Müdürlüğü’nün 16L0234005 proje numarası ile desteklenmiştir.

Effect of Accelerated Artificial Aging on Color Stability of CAD-CAM Materials

Abstract

Objectives: To evaluate the effect of glaze and polishing procedures on the color stability (ΔE00) of CAD-CAM blocks in different microstructures after accelerated artificial aging (AAA).
Materials and Methods: This study consisted of 3 main groups. Fifty specimens were fabricated from CAD-CAM blocks (Vita Mark II, Vita Suprinity and Vita Enamic) and after mechanical polishing or glaze finishing, the specimens (Mp, Mg, Sp, Sg, Ep) were randomly divided into five subgroups (n=10). All specimens were exposed to ultraviolet light and water spray for 300 hours in the QUV test machine. After AAA application, ΔE00 of materials was calculated. L*, a*, b* values were recorded using a calibrated digital spectrophotometer. The data were evaluated by using Kruskal Wallis Test and Mann Whitney U Test with Bonferroni corrections at the significance level of 0.05.
Results: Polishing method resulted in statistically highest ΔE00 for Mp specimens (p<.001). Also Ep specimens showed statistically higher ΔE00 than Sp specimens (p=.002). Glaze method resulted in statistically higher ΔE00 for Sg specimens than Mg specimens (p=.005). Polishing method resulted in statistically lowest ΔL’ for Mp specimens (p=.003) and highest ΔC’ (p<.001) and ΔH’ (p<.001) for Ep specimens . On the other hand there were no significant differences for ΔL’(p=.796), ΔC’ (p=.218), ΔH’ (p=.529) for the glaze applied specimens.
Conclusions: Considering polishing tecnique AAA process increased the ΔC’ and ΔH’ values for Enamic material and decreased ΔL’ values for Mark II material, consequently affecting chroma, hue and lightness values of the materials.
Keywords: CAD-CAM, color, aging

Keywords

CAD-CAM, color, aging

Project Number

16L0234005

References

• Acar O, Yilmaz B, Altintas SH, Chandrasekaran I, Johnston WM. Color stainability of CAD-CAM and nanocomposite resin materials. J. Prosthet Dent. 2016;115(1):71-5.
• Al-Harbi FA, Ayad NM, Arrejaie AS, Bahgat HA, Baba NZ. Effect of Aging Regimens on Resin Nanoceramic Chairside CAD-CAM Material. J. Prosthodont. 2017;26(5):432-439.
• An JS, Son HH, Qadeer S, Ju SW, Ahn JS. The influence of a continuous increase in thickness of opaque-shade composite resin on masking ability and translucency. Acta Odontol. Scand. 2013;71(1):120-9.
• Ardu S, Braut V, Gutemberg D, Krejci I, Dietschi D, Feilzer AJ. A long-term laboratory test on staining susceptibility of esthetic composite resin materials. Quintessence Int. 2010;41(8):695–702.
• Atay A, Karayazgan B, Ozkan Y, Akyil MS. Effect of colored beverages on the color stability of feldspathic porcelain subjected to various surface treatments. Quintessence Int. 2009;40(7):e41-8.
• Awad D, Stawarczyk B, Liebermann A, Ilie N. Translucency of esthetic dental restorative CAD-CAM materials and composite resins with respect to thickness and surface roughness. J. Prosthet. Dent. 2015;113(6):534-40.
• Bagis B, Turgut S. Optical properties of current ceramics systems for laminate veneers. J. Dent. 2013;41(3):e24-30.
• Chu SJ, Trushkowsky RD, Paravina RD. Dental color matching instruments and systems. Review of clinical and search aspects. J. Dent. 2010;38(2):e2-16.
• Da Cunha LF, Mukai E, Hamerschmitt RM, Correr GM. Fabrication of lithium silicate ceramic veneers with a CAD-CAM approach: a clinical report of cleidocranial dysplasia. J. Prosthet. Dent. 2015;113(5):355-9.
• Davidowitz G, Kotick PG. The use of CAD-CAM in dentistry. Dent. Clin. North. Am. 2011;55(3):559-70.
• De Oliveira AL, Botta AC, Campos JA, Garcia PP. Effects of immersion media and repolishing on color stability and superficial morphology of nanofilled composite resin. Microsc. Microanal. 2014;20(4):1234-9.
• De Oliveira DC, Ayres AP, Rocha MG, Giannini M, Puppin Rontani RM, Ferracane JL, Sinhoreti MA. Effect of Different In Vitro Aging Methods on Color Stability of a Dental Resin-Based Composite Using CIELAB and CIEDE2000 Color-Difference Formulas. J. Esthet. Restor. Dent. 2015;27(5):322-30.
• Dikicier S, Ayyıldiz S, Ozen J, Sipahi C. Effect of varying core thicknesses and artificial aging on the color difference of different all-ceramic materials. Acta. Odontol. Scand. 2014;72(8):623-9.
• Ertan AA, Sahin E. Colour stability of low fusing porcelains: an in vitro study. J. Oral Rehabil. 2005;32:358-361.
• Fasbinder DJ, Neiva GF. Surface Evaluation of Polishing Techniques for New Resilient CAD-CAM Restorative Materials. J. Esthet. Restor. Dent. 2016;28(1):56-66.
• Flury S, Diebold E, Peutzfeldt A, Lussi A. Effect of artificial toothbrushing and water storage on the surface roughness and micromechanical properties of tooth-colored CAD-CAM materials. J. Prosthet. Dent. 2017;117(6):767-774.
• Fonzar RF. A study into mechanical, aesthetic and adhesive aspects of lithia silica-based glass ceramics. Florentina Studiorum Universitas. Italy Ph.D. Thesis. 2015
• Ghinea R, Pérez MM, Herrera LJ, Rivas MJ, Yebra A, Paravina RD. Color difference thresholds in dental ceramics. J. Dent. 2010;38(2):e57-64.
• Hekimoglu C, Anil N, Etikan. Effect of accelerated aging on the color stability of cemented laminate veneers. Int. J. Prosthodont. 2000;13(1):29-33.
• Heydecke G, Zhang F, Razzoog ME. In vitro color stability of double-layer veneers after accelerated aging. J. Prosthet. Dent. 2001;85(6):551–7.
• ISO/TR 28642:2016 Dentistry-Guidance on colour measurement.
• Karaokutan I, Yılmaz Savas T, Aykent F, Ozdere E. Color Stability of CAD-CAM Fabricated Inlays after Accelerated Artificial Aging. J. Prosthodont. 2016;25(6):472-7.
• Lawson NC, Burgess JO. Gloss and Stain Resistance of Ceramic‐Polymer CAD-CAM Restorative Blocks. J. Esthet. Restor. Dent. 2016;28(1):S40-5.
• Ledić K, Majnarić I, Milardović S, Ortolan, Špalj S, Štefančić S, Mehulić K. Analysis of Translucency Parameter of Glass-Ceramics Fabricated by Different Techniques. Acta. Stomatol. Croat. 2015;49(1):27-35.
• Lu H, Powers JM. Color stability of resin cements after accelerated aging. Am. J. Dent. 2004;17(5):354–8.
• Mainjot AK, Dupont NM, Oudkerk JC, Dewael TY, Sadoun MJ. From Artisanal to CAD-CAM Blocks: State of the Art of Indirect Composites. J. Dent. Res. 2016;95(5):487-95.
• Niu E, Agustin M, Douglas RD. Color match of machinable lithium disilicate ceramics: Effects of cement color and thickness. J. Prosthet. Dent. 2014;111(1):42-50.
• Ozcan M, Allahbeickaraghi A, Dundar M. Possible hazardous effects of hydrofluoric acid and recommendations for treatment approach: a review. Clin. Oral Investig. 2012;16(1):15-23.
• Paravina RD, Ghinea R, Herrera LJ, Bona AD, Igiel C, Linninger M, Sakai M, Takahashi H, Tashkandi E, Perez Mdel M. Color difference thresholds in dentistry. J. Esthet. Restor. Dent. 2015;27(1):S1–9.
• Perez Mdel M, Ghinea R, Herrera LJ, Ionescu AM, Pomares H, Pulgar R, Paravina RD. Dental ceramics: a CIEDE2000 acceptability thresholds for lightness, chroma and hue differences. J. Dent. 2011;39(3):e37-44.
• Preis V, Grumser K, Schneider-Feyrer S, Behr M, Rosentritt M. The effectiveness of polishing kits: influence on surface roughness of zirconia. Int. J. Prosthodont. 2015;28(2):149-51.
• Rashid H, Sheikh Z, Misbahuddin S, Kazmi MR, Qureshi S, Uddin MZ. Advancements in all-ceramics for dental restorations and their effect on the wear of opposing dentition. Eur. J. Dent. 2016;10(4):583-588.
• Sarac D, Sarac YS, Yuzbasıoglu E, Bal S. The effects of porcelain polishing systems on the color and surface texture of feldspathic porcelain. J. Prosthet. Dent. 2006;96(2):122- 8.
• Sarac D, Sarac YS, Yuzbasioglu E, Bal S. The effects of porcelain polishing systems on the color and surface texture of feldspathic porcelain. J. Prosthet. Dent. 2006;96(2):122-8.
• Sato TP, Anami LC, Melo RM, Valandro LF, Bottino MA. Effects of Surface Treatments on the Bond Strength Between Resin Cement and a New Zirconia-reinforced Lithium Silicate Ceramic. Oper. Dent. 2016;41(3):284-92.
• Sharma G, Wu W, Dalal EN. The CIEDE2000 Color-Difference Formula: Implementation Notes, Supplementary Test Data, and Mathematical Observations. Color. Res. Appl. 2005;30(1):21-30
• Silva TM, Salvia AC, Carvalho RF, Pagani C, Rocha DM, Silva EG. Polishing for glass ceramics: which protocol?. J. Prosthodont. Res. 2014;58(3):160-70.
• Swain MV, Coldea A, Bilkhair A, Guess PC. Interpenetrating network ceramic-resin composite dental restorative materials. Dent. Mater. 2016;32(1):34–42.
• Tuncdemır AR, Gungor AY, Kahraman B. The relationship of some patients factors with shade of their teeth measured by spectrophotometry in Turkish people. Pak. J. Med. Sci. 2012;28(1):p67-70.
• Turgut S, Bagıs B. Color stability of laminate veneers: an in vitro study. J. Dent. 2011;39(3):57-64